The re-registration of the computer

Similar Questions

• XP antivirus is not saved when scanning the computer, find virus then registration

  How do get rid you of it and launch the scanner security and Microsoft Security Essentials?

  * original title - XP Antiviurs 2011 unregistered, scans the computer, detects viruses, applies for the registration.   Indicates the protection that antivirus and firewall is disabled.  What happens here *.

  Hello

  1. it seems that your system is infected by the virus and must remove it from the computer

  2. I suggest you a scan of your computer and then it will check the virus and it will delete

  3. what security software is installed on your computer right now?

  I suggest you to install Microsoft security essential on your computer that is free of cost

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Satellite L300 - driver Open Webcam fail. Restart the computer or the camera

  Hello

  I recently bought a new Satellite L300 under Windows Vista Home Premium SP1. The Webcam worked fine for a few days and then the next time I booted up Vista, I get the following error "Webcam driver open fail, please restart camera or computer. Since the computer is new I reformatted to see if it wasn t a program is blocking something.

  Reformat 2 times and the error still ride on the installation of the Camera Assistant Software for Toshiba. I downloaded the update from Toshiba support file but still the same error. The funny thing is that the Device Manager does not detect even the webcam. There is no registration for the webcam. How will I know that it is a hardware problem? Does anyone have experience with this problem?

  The store that I bought it offered to give me a new, but do not have any in stock, so I have to wait 3 weeks.

  Thank you

  Hello

  The webcam must be listed in the Device Manager. It s not called not webcam but you should find it in the imagery of the devices-> USB video device

  The webcam should work fine. Usually after installing the webcam software, you should find the webcam software in the MSCONFIG-> startup
  If the webcam is listed here then that would mean that the software/driver webcam still load during a laptop boot procedure.

  In some cases there could be a compatibility issue between this software and a 3rd party applications like MS messenger or Skype for example.

  In your case, I recommend you to disable the webcam and other applications such as MS messenger or Skype software in MSCONFIG-> startup.
  Then clean the BONES and the registry using the CCLeaner.

  I also recommend the Vista update to the last State. All fixes and patches must be installed!

  Finally if you want to use the webcam then you could start the software manually.
  Exe file must be placed in Camera Assistant Software.

  Best regards

• My tor 2 years part of my license from microsoft 98, registry number is in the computer, help?

  My 2 year tor, a part of the windows 98 license, the registration number is using the computer?

  Hi r.moore,.
   
  -You are unable to boot to the desktop of your computer?
   
  Contact the Microsoft Customer Service on this issue. Visit the following link to do the same thing:
  How to identify, locate, and replace a product key

• What exactly happens when you change the name of the computer, and it asks you to restart?

  What exactly happens when you change the name of the computer, and it asks you to restart - relating to the registration and identification of network?  Specifically when a computer isn't yet in one area but is still in a working group.  Y at - it show any PC by informing other computers it's name has changed?

  Computers into working groups are actively seeking each other, so if you rename a computer, it will not be shown anything. The restart is to erase the name of origin since the system cache, he will think that it's always the old name until the reboot takes place. Work computers is simply 'shake hands' with each other whenever they need to communicate.

  Computers that are part of a domain are created a 'computer' account that is assigned a random password that changes every 30 days by default automatically. These computer accounts work almost identical to an Active Directory user account, which means that they are not proactive they simply cached credentials with their permissions to provide if / when requested by heritage in the environment.
  Users and computers Active Directory accounts are stored in the NTDS. SAID the database, the backbone of an AD environment. When a computer name changes in one area, it takes the PC restarted simply for the PC. The change of name in Active Directory will replicate throughout the environment based on the settings of replication of this environment.
  I'm too simplify all this, but the general concept is there.

• Can version non-Genuine XP on the computer, I write with my authentic version too?

  Recently had a friend clean up my computer and re-install XP. He did not use my genuine disc, I have had with the computer, but installed a copied version.  Then I too ask or record the version that it installed on my computer with my own or use my registration code to make this legitimate version?

  Hello

  (a) if the copied version of Windows XPcorresponds to the same edition, which was previously installed on your machine, you can use the original product key on your machine to make a legitimate copy of Windows.

  You can run the product key update tool to make a genuine copy of Windows.

  Windows product key update tool instructions

  (b) you can also contact the Microsoft customer and support for assistance Service team. They will check the part number & check if the product key can be used on your machine.

  For more information, please visit: how and when to contact Microsoft and support Customer Service

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Black screen because of a video driver when the computer loading.

  I tried to change my video driver and now I get a black screen when loading Windows Vista.  How can I regulate the video driver or any other suggestions?

  Hello

  You can access Mode safe? You start the computer, press F8 repeatedly. Cases in this use System
  Restore and/or know last good configuration.

  --------------------------------------------------------------------------------------------------

  No registration necessary data and re - install Windows Vista may be the best option if
  Here are a few more.

  You can save your files by putting the drive in another computer as a 2nd drive (the best) or a
  External drive USB enclosure and then backup to removable media such as CD, DVD,
  or other USB keys. Of course, a real computer store or your system maker can help to recover
  the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS
  -then on the Applications tab - lower right kind - new task - in EXPLORER.exe. Safe mode
  is accessible by tapping F8 as you start several times. CTRL + SHIFT + ESC will also start task
  Manager.

  First check this thread in case it is simple and if not to come back to this thread. http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.
  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the disks
  the manufacturer of your system will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• pictures in my files on the computer have microsoft design Blue Mountain on them

  * - Original title - I used to be able to see the images in my files on the computer, now they are all still there, but have some sort of image of microsoft on them, when I attach its my photo

  recorded photos on this computer during registration and you want to attach to an email. you click room attached, open my file pic and I could watch all the photos I wanted, now I do the same thing, but all my pictures have like that microsoft blue mountain on them conception

  Hello

  Did recent changes to the computer?

  Follow these steps to enable thumbnails in Vista

  1 - click on the Windows logo in the taskbar, and then click on ""computer. " "

  2 - Click on "organize" on the upper left side of the toolbar of Windows Explorer, then click on 'folder and Search Options'.

  3 - Click on 'View' and then uncheck "always show icons, never thumbnails".

  4 - Open a folder on your computer. A green bar going through the folder at the top of the window address bar. Whenever this happens, Vista is repopulating his miniature previews for this folder.

  Refer.

  Change the folder options

  http://Windows.Microsoft.com/en-us/Windows7/change-folder-options

  I hope this helps.

• How I race hard drive and finish recording software on my behalf, before I make a donation to a non-profit organization of the computer.

  I have a Windows Vista Home Premium computer bought the bridge a few years ago. I would like to make a donation to a non-profit organization of the computer. Before I give it, I have to put an end to the online registration of the unit that I started when I was. Also, I want to race hard disc and internet explore personal folders. I need to know how to do this in steps that I can understand. Please send an e-mail: * address email is removed from the privacy *

  Hello

  I suggest you to back up all the important data and then format the drives to donate.

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Regarding the end of online registration, I suggest you to contact gateway supports for better assistance.

• I'm afraid only on restoring the computer to the exact state it is now.

  I reinstalled Windows Vista on a computer, I have not used in a while. I repeated the Windows Update until there are no updates and at this point, I am very satisfied with the results. What I want to do, it's something tangible, like a CD, which will restore your computer to this exact condition must - I never need to create. I don't like on registration of files, folders, programs or anything else that could be put on this computer at a later date, I fear that on restoring the computer to the exact state it is now. Any information would be extremely grateful. Thank you.

  Hello

  Better to use redundant methods. Good idea to create one after loading the main software
  you are going to use.

  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Create a complete PC Backup and restore Image in Vista
  http://www.Vistax64.com/tutorials/99709-backup-complete-computer.html

  How to restore the complete computer from a complete backup and restore Image in Vista
  http://www.Vistax64.com/tutorials/99718-restore-complete-computer.html

  Vista: How to back up files or create Image
  http://www.tech-recipes.com/Rx/2039/vista_how_to_backup_files_create_image/

  How to use the full backup of PC and restore utility of Vista
  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  Acronis image - commercial program
  http://www.Acronis.com/homecomputing/products/TrueImage/

  There are other programs such as Norton Ghost and even some freeware you can find
  using BING or Google.

  -----------------------------------------------------------------------------------------------------

  For backups of data after you have your System Image.

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find and
  a restoration as well as many file. You can also burn an image of your installation from time to time to be
  able to get restored programs and then use the backups to replace the data.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  How to make a backup of your data
  http://www.vista4beginners.com/how-to-backup-your-data

  ImageBurn - free
  http://www.ImgBurn.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Whenever I use the computer, I get the message "install new updates"

  The most recent 2 Win7 security upgrades/downgrades are on my computer. I checked.

  Whenever I use the computer, I get the message "install new updates"

  How to set the flag that says I have miserable things?

  Thank you

  Trevor

  Original title: upgrades

  Hello Tworg,

  Thank you for the update on the question and sorry for a delayed response.

  If your Windows Update history shows that .NET Framework 4.5.1 is installed successfully. If troubleshooting says ' registration for the service is missing or corrupt... not fixed "then you can try the methods provided below and see if help."

  Method 1

  I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Method 2

  If after performing more high question method persists try to follow the steps described in the following Microsoft article methods.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• QuickBooks error qbregistration. Intuit says it's in the computer, no software.

  Someone had a problem trying to install QuickBooks Pro 2012.  I get the following error: "error: QuickBooks has a problem in reading this file for registration: qbregistration.  Tried to drive and the installer Intuit Online.  It checks the license number, but gives me this error when I try and install.  QuickBooks support says that it is not in the software but don't tell me what to do what they want me to buy a contract of service from them an access to my computer for correct installation.

  Thank you

  Hello

  You are able to install other programs?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Error: QuickBooks has a problem in this recording file playback: qbregistration.dat: http://support.quickbooks.intuit.com/support/articles/SLN41019

  Method 2:

  Try installing the latest Microsoft Visual Basic C++ runtime components and then try to install QuickBooks.

  How to get the Visual C++ 6.0 runtime components: http://support.microsoft.com/kb/259403

  Method 2:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135                                                                                                                       
  Note: once you have completed troubleshooting, perform the steps from Step 7 to reset the computer as usual.

  If the methods did not help, then it would be better to post the same question in the Intuit community (QuickBooks forum).

  QuickBooks Installation, update & Conversion: http://community.intuit.com/category/quickbooks-installation-update-conversion

  It will be useful.

• Is it possible to manage my contacts in the computer to blackBerry smartphones?

  Hi, I was wondering is it possible that I can manage my contacts from my computer? When I bought this phone, BB Storm and performed a sync with my computer, I had a lot of questions which have fortunately been resolved through this forum (thanks guys). I got all my contacts that I thought I had lost, but now my contacts appear in my BB as individual registrations. Let me explain: Mia's mobile phone number on one... Mia's personal phone number on another contact... all his information are separated by the singles... I hope that I was clear English is my second language... Is there a way I can manage my list of contacts in the computer, because my BB, I could lose my mind trying many fixes to type... I have 600 contacts...

  PS: On the "option screen and keyboard, touchscreen options... What is the ideal choice"interval type"...» 100, 200, 300... What is 'Hover period'... excuse my ignorance... AND "Swipe Sensitivity", what is the ideal number to use...? SO many questions? SIP...

  1. I would recommend that you synchronize your data of contact BlackBerry to your computer using Desktop Manager to synchronize with Outlook or Outlook Express. From there, you can edit, merge and massage your records and then synchronize to the device.

  Download Desktop Manager here:
  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  2. try these settings on your Storm.

  Increase the interval of 500 valve.
  Increase the hover at 1000.
  Increase the sensitivity by scanning at high (6).
  Fast rate.

  Details here:

  http://www.BlackBerryForums.com/General-9500-series-discussion-storm/162279-settings-better-storm-KE...