Black screen because of a video driver when the computer loading.

Similar Questions

• Laptop 15 R-063tu: black screen occurs for a few seconds when the charger is connconnected

  Mr President, there are a lot of problems occurred after the upgrade to windows 10 but I have a lot of them except that, when plugged into the charger for my laptop on the screen goes black for a few seconds(3-4) and even when I plugged. He was failed on the help of version.please victory 8.1.

  Hi there @Dip009,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you had upgraded to Windows 10 and now you have a problem with the screen going black when you plug the AC adapter or disconnect your laptop of HP 15-r063tu.

  You get an error with the black screen?

  Have you tried to see if you get the black screen in Mode safe?

  Have you tried to run the Troubleshooter of power?

  Have you checked the power settings to ensure that the brightness is not set to 0% when the power cord is plugged?

  

  Have you tried to go to change advanced power settings to ensure that none of these settings are defined to enable the black display when it is plugged in?

  Have you tried to do Windows updates?

  Have you tried to make updates using the HP Support Assistant? Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system at the time of purchase or need to be updated.

  Another option to try would be to go on the software of HP 15-r063tu notebook PC and the driver page, click the check now orange and HP will identify missing or outdated drivers and software necessary.

  I have a couple of documents for you to read for more troubleshooting. Here's one called Management of power (10 of Windows) Options. Here is another document for you to Microsoft called Troubleshooting black screen problems.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Black screen with cursor just after turning on the computer in Vista

  When I turn on my computer, it's just a black screen and the cursor. I can move the cursor autour, but I can't go any further. The same thing happens in safe mode. Help, please! :( I tried to repair vista with the installation cd, but it is no problem. I searched around the internet and many people have the same problem, but I can't find a solution to this! Please help me! :(

  Hi SiljeRypern,

  Please see the thread with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/06881a84-595e-40b0-96CE-87cb7a1874ef/

  I hope this helps!

• Recently, my screen goes to power saving mode when the computer is used.

  This does not happen on a particular site... it's pretty random.

  The computer does not turn off but the only way to get the monitor back on is to restart the computer.  Any ideas what could be causing this?

  I did, but still having the problem.  Thanks for your help!

  Looks like the defective video card/cable eventually.  Could be power issues or motherboard as well.

• EXPLORER WINDOWS STOPPED WORKING [NOW WHEN MY COMPUTER LOADED UP, ALL I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NOTHING] _

  I RECEIVED A MESSAGE "WINDOWS EXPLORER HAS STOPPED WORKING" [NOW WHEN MY COMPUTER LOAD UPWARD, ALL WHAT I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NO WALLPAPER, NOTHING].

  AFTER A REBOOT, I GOT A MESSAGE "PROJECT WINDOW HAS STOPPED WORKING. A PROBLEM CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. THE WINDOW CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. "AFTER HAVING CLICKED ON THE MESSAGE HE OPENED THE WINDOW UPDATE,.

  I TRY THE WINDOW UPDATE, I THINK THAT THE UPDATE FOR WINDOWS VISTA SERVICE PACK 2, BUT HE HAS JUST SAY PREPARES TO INSTALL THE UPDATE AND RUNNING IT FOR HOURS, BUT NEVER INSTALL THE UPDATE.

  IT OF THE ONLY SOLUTION WINDOW SHOWEVED FOR ME, IS THERE ANY OTHER SOLUTION TO MY PROBLEM?

  Thank you

  OH I JUST ACCESSED INTERNET EXPLORER, CONTROL PANEL, MY COMPUTER WITH DELL DOCK FOLDER. DELL DOCK IS THE ONLY PROGRAM RUNNING. MY OFFICE IS STILL IS NOT RUNNING. MENU START, THE ICONS, THE WALL PAPER STILL DOES NOT WORK. I STILL HAVE BLACK SCREEN.
  I TRIED THE SYSTEM RESTORE, BUT IT FAILED. I HAVVE MY BLACK SCREEN PROBLEM.

  Andy1502_a,
  If you haven't tried the "last known good configuration" among the Advanced startup options then do that first.  If this does not help, you must run the System File Checker to search for possible system problems.  Then, you must run the upgrade from the system tool and then see if you are able to run the SP2 update.   Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

  My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

  Read this:

  Get help with audio, video, or power on Apple TV - Apple Support

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• You want to update video driver in the Photoshop cs4 software.   Already have the driver, just need to get into the software

  You want to update video driver in the Photoshop cs4 software.   Already have the driver, just need to get into the software

  The driver will not in Photoshop. It is installed with your operating system. There should be an installer as part of the file you have received. When the driver proper. You must choose between Mac or Windows and your system is 32-bit or 64-bit. Some systems can only provide an update of the driver during his sense of system update that it is included in the same update. Others may use a update of the system will allow a user to install the driver manually, but can be difficult to prevent the user from making things worse.

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• There are two screens (split screen) showing when the computer is turned on.

  There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?

  Hi Ikthomas1,

  When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.

  If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.

• When the computer is connected to the TV, computer screen turns off

  When the computer is connected to the tv (cable 15) the monitor of the computer turns off. the only photo is on the tv screen. I have no idea what happened to cause this

  * original title - tv monitor__ *.

  Hi rwertheim,

  Please see the following articles with additional information and troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  and:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Disable the lock screen sleeps but not when the computer sleeps.

  Hello
  My goal (and thousands of other users of Windows 8) are to save the batteries without be pestered constantly to enter my password - but at the same time to preserve the security of the computer.
  My goal is the following:
  -Screen could sleep in X minutes (to save power) without the computer
  -Lock the computer when the computer goes to sleep in X + Y minutes.
  I intentionally left the details that are not important. Please do not post a response unless you have been able to do successfully is Windows 8 - i.e. only requires a password when the computer goes to sleep, but not the screen.  It was no problem in Windows 7.  Is - this another Windows 8 'development '?
  X and Y are two positive integers. 8-)
  I expect an answer of reg-edit...
  Thank you

  Hello

  1 have had any changes made on the computer before the show?

  2. have you set any screensaver on your computer?

  If you have set a screen saver, I suggest you to follow these steps and check if it works:

  a. right click on the desktop.

  b. click on Customize.

  c. click on screen saver.

  d. in the new window, uncheck the option on the resume, the logon screen.

  e. click apply and OK.

  Let us know the results.