The reading is not clear - HELP - the program monitor

Similar Questions

• The program monitor - I'm not seeing full clip during playback

  I am worried real!  After days of my life, import video and editing-and then trying to solve my problem to see only part of the fastener back playing in the program monitor that brought me to your site.  I spent hours looking at your posts (and indeed Adobe help pages) is trying to solve this problem and clearly my sequence settings initial (I think!) were wrong.  Maybe I can come back because I really don't know how these values are set correctly.  My original question please, if I finish my editing and then export this file, will I see again that part of the clips in the final version, or will I see all of the original clip?

  Some information:

  -Windows 7

  -Premiere Pro CS4

  -Program monitor setting is 'fit '.

  -aspect ratio 16:9

  -PAL (based in the United Kingdom)

  -Camcorder Sony HD - SR12E

  -1920 x 1080i HD

  Phew, hope this is enough Info for you "kick start" me!

  Thank you.

  Best regards, Doreen.

  From the looks of it reviews, the camera probably records in 1920 x 1080, so it is likely that you need the 1080i25 not anamorphic, preset (50i) AVCHD.

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• Cause of multi Cam in the program monitor PPCC. Help?

  Hello

  For the last week, I've been editing Canon. MXF a five camera images shot in Multicam PremPro CC.

  Everything was fine.  I progresses and has been able to export some preview episodes.

  Late last night, so that the edition Multi Cam in the program window, half Multicam window becomes black.

  

  Multi cam is activated in the program monitor.

  The Source window can see the multiple in the sequence cams - as seen here below.

  

  And the timeline has everything enabled for Multicam as well.

  

  As I say, I've been editing this project even for more than a week now, and it suddenly stops the multicam in the program monitor.

  The footage I had finished editing is no longer will show Multi cam in the program either monitor.  And the project has the same through other computers in this studio.

  CC is a bit different than CS6.  It is the most recent update the PPCC2014.2

  I'm looking for suggestions of ideas for what to do here before we start the project more in CS6.

  I hope I won't have to go back to CS6 a second time on a Bill this year.

  Your comments are appreciated.

  Thank you for your time.

  Right,

  So here was the problem, if any of you out there people are going nuts with what appears to be a broken project.

  In the timeline above layer multicam, I was falling into the graphics. I cut and paste into.

  In order to so I highlight the layer I want to drop the graphics on.

  As shown below.

  

  Once a layer is a highlight that the layer of Multicam, the program monitor will show is more multicam.

  Remove the layer as shown highlighted below.

  

  Hope this helps someone.

  See you soon...

• Why my subtitles appear in the program monitor?

  Howdy!

  I'm doing some captions, body CC 2015, horrible on a video with an audio track.  I created the subtitle file, turn on the display of the legend on the program monitor and made sure legends I created (just a little far) are activated without a doubt too.  When I saw the legends in the monitor, I exported just the section captioned a. MOV file, with embedded captions once and once with them "engraved" on the video.  The subtitles are displayed, even if they are a bit of a mess (spaces, etc.), so I know that the first known legends.  So... why they do not appear in the program monitor?

  Any help appreciated!

  (- Jim 8 ^)

  Looks like that the first default - folder > new > legends > video settings > new legends

  default values for the Standard CEA-608

  and the program, the default monitor - key > legends display > settings > CEA-708 Standard

  Thus, with the legend, the program monitor's two default settings does not appear

  for me to have the subtitles to display in the program monitor, I had to 'match' standards of legend

  but, what happened to change the font size? Are you able to do? I thought I read in the legend help first, this type of policy, the size, was editable, so am I missing something?

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• The program monitor randomly goes black

  First Pro CC uses for months and no problem.  All of a sudden, the program monitor goes black, then back over video transitions between clips, then goes black again.

  I have a HP workstation, with a processor of xenon 12-core, 32 GB RAM, 9 TB of disk storage hard (the first 1 TB flash), blazing fast dedicated with a ton of video memory video card.  It's worked wonders for 12 months and with all the other products Adobe (Photoshop, Lightroom) and hundreds of other programs.  I have NOT changed any video card or video processing settings.   I don't have a hardware problem - it is a problem with Adobe first Pro CC.

  I spent the maximum money on the hardware and the software more later/better (even though I hate paying a subscription for software).  And now this...   Moreover, I understand now and still not a bug, but when the screen goes black in a video software - well, it's like losing your direction while on the highway - it's sort of IMPORTANT - wouldn't you say Adobe?

  I'll scream at Adobe on Monday, but have a serious work that must be done this weekend.

  Is there any help that works?

  You use the latest versions (which numbers?) of Adobe CC?

  Try resetting the workspace.

  Try to update or restore your video driver.

  Try to remove the media cache files.

  Try resetting preferences.

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• The program monitor empty composite video.

  2 x 2.26 Ghz Quad Core Intel Xeon

  16 GB of DDr3 memory

  2011 mac Pro

  DeckLink Studio 4 k audio and video output running at the receiver and external controller

  NVIDIA 5770

  Graphics NVIDIA Quadro 4000 card

  The program monitor is empty. I've got audio of counting. I can get staff to record the signal, but in composite video, nothing comes through. The video and audio signals are through my card of cause on an external monitor and speakers, but the program monitor is just empty.

  I tried restarting the computer and the creation. Check the updates of drivers Cuda. 6.1.18 running

  Already old version 6.5.14 but the problem persists.

  Tried to create a new project.

  I tried different video settings for the sequence, but all behaving the same way.

  I can't video playback in my UI for the source or video monitor.

  Help, please.

  Contacted support via chat. Is that the rendering engine has been set to OpenCL rather than Cuda. To do this, go to 'file/project settings/general' at the top of this is the rendering engine of access. If it isn't on Cuda and you Cuda, then you will not have playback. Problem solved. I feel stupid, but there is the answer if someone else needs.

• The program monitor keeps going black in first Pro CC

  PC - first Pro CC - AMD Fire Pro (13.101 - 130604 a - 158071E - ATI)

  I'm working on a project and the program monitor keeps going black in first Pro CC while I'm working on the script. I got like 28 GB of memory granted to the program and update the latest version of the driver for my graphics card. No idea why this continues to happen, but the only way I can get around it is to reboot. When I go to close the program hangs and I have to stop it in system preferences.

  Under a crazy period if you can help? Thank you

  Hi Jonathan,.

  We have not seen a response from you because you have created this thread. Please let us know if you have solved the problem completely. For others on this thread, a few things were useful to solve the problem of 'black screen '.

  1. If your computer is underpowered and outdated (especially your CPU and GPU), he will expose the problem of 'black screen '. Consider upgrading your components or by switching to a newer computer.
  2. If your computer is newer and has components that are well within spec (core i7, 2 + GB VRAM for your GPU, etc) and you get the problem of 'black screen', it is likely to do with your GPU drivers or you have two GPUS and the Control Panel has the GPU badly activated for high quality graphics features. Control Panel for your GPU is probably pointing to the GPU to lower power of two.
     • Note that even if you have a considerably amplified GPU, it may be an old one that does not support drivers for a new version of OS X or Windows
  3. The GPU is problematic, in general. Choose file > project settings > general and set the converter to Mercury Playback Engine Software only
  4. Avoid the update to OS X 10.11

  Other workaround solutions include:

  1. Open the reference monitor: window > reference monitor
  2. Turn off the track (eyeball) power off, then on again. (Note: this may take a few tries)
  3. If you have already updated to OS X 10.11, OS X update to the current version
  4. Restore previous versions of video drivers video drivers
  5. Rolling back to a previous operating system
  6. Restoration of an earlier version of Premiere Pro

  I will mark this message as the correct answer and will add that other solutions users can have about it. Send me a PM if you think that your solution should be listed.

  Thank you
  Kevin

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• CS5, no Audio output of the Source monitor, but output OK for the program monitor

  Hi all

  Any thoughts on why audio output would be audible during playback in a timeline/program monitor, but the same clip doesn't produce audio output when loading in the source monitor? In the body of CS5.

  I checked the preference settings and everything seems to be fine there.  We have just added a set of external speakers to this workstation and those are the audio devices in the program monitor.  When a clip is read in the Source monitor, speakers produce a nice low hum, but the sound of the clip is missing.  The buzz that crosses leads me to believe the audio hardware is mapped and set correctly, but maybe not?

  Thanks for your thoughts?

  LIndsay

  My apologies for the lack of detail... I know better than that.  Luckily I thought about it the problem.

  The clip is Ikegami MXF.  The problem was that the first audio channel didn't have any audio recorded to it.  I changed the properties audio clip and disabled channel 1. Voila! The clip was loaded in the source monitor and the sound became audible.

  I found the inspiration for the fix in this thread: http://forums.adobe.com/message/4324033#4324033

  Thanks for the research!

  Lindsay

• Problem with static in the program monitor when images paused

  Hi all

  I'm working on a combo video / image editing. The video is 1080 p 24 p shot by my digital SLR T2i.

  The images are larger JPG (appx 5000 x 3500). I'm using a very soft pan / zoom on the images when they come into the frame, that's why I wanted to keep the larger size (so it can fall down space of 1920 x 1080 and not reveal and background black).

  In any case, when reading, everything seems OK, but when a break on an image, the program monitor displays garbage. It will show you a mash of colors, anything that looks like the original image. Back scrubber or playing back the image, but a break on this subject shows nothing. It's painful because I need to "guess" where the image for the pan / zoom effects since I can't as it is blurred.

  Looks like almost for a long time when you do not have a television station and you have white static.

  I have to add my system:

  Core i7 3770 k

  Card mother ASRock z77

  GTX570

  16 GB of RAM

  Further, this probably has to do with the size of the image. I just had an accident as well of my Nvidia driver; and found that this related thread:

  http://forums.Adobe.com/message/4259487

  Start by reducing the size of your images to not more than 2500 x 1750. It will make for an experience of editing much snappier, reduce the load on your system and allow some soft pan and zoom.