The report from the IOM 9.1.0.1

Similar Questions

• Change the folder of default reports from outside the sequence editor

  Hello

  I want to set the path to the folder of the regular reports of TS (xml) outside the sequence editor, i.e. in a txt file. I would like to load this value in the sequence or the performance of model sequential (to read this file). Play with what I achieved only copy reports to different my folder both outside. No one knows how to correctly do this operation?

  See you soon,.

  K

  I have accomplished this setting the path of the report dynamically, using the ReportOptions reminder in my process model.

  I had set the following report options:

  Parameters.ReportOptions.DirectoryType = "SpecificDirectory".

  Parameters.ReportOptions.Directory = 'C:\\Program Files\\Functional Test\\Reports\\' + Parameters.UUT_PN

  Parameters.ReportOptions.BaseName = 'report '.

  Parameters.ReportOptions.UseFormatForExtension = TRUE

  Parameters.ReportOptions.Extension = «»

  Parameters.ReportOptions.ReportFilePath = «»

  Parameters.ReportOptions.NewFileNameForEachUUT = TRUE

  Parameters.ReportOptions.AddTimeAndDateToFileName = TRUE

  Parameters.ReportOptions.GeneratePath = TRUE

  arameters. ReportOptions.Format = "html".

  The second entry above, I set the directory based on the number of game USE which is analyzed by the operator.  So in your case, you will need to set the "Parameters.ReportOptions.Directory" item based on a path read you a text file.   According to the structure of your text, file, get the path of the report (from file) could be done in a few differnet ways...

  Thank you

  Paul Holzrichter

• Need to create useful reports from the results of TestStand (.mdb) database

  Any help is greatly appreciated!

  We need create reports from the results of TestStand (.mdb) database.  I was not able to find much online.

  Details:

  In 2014 TestStand, we have configured to use Access database management system.  Otherwise, the database settings are default.

  These reports will be targeted to managers and engineers.  They need to show objects as:

  Which EHR past/almost?

  For each DEGREE, what past/a failed test?

  Thanks for all the suggestions!

  Because I couldn't find anything pre-made, I created reports from scratch using queries in Microsoft Access 2010.

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE

• a report from jj/mm to the jj/mm

  Hello

  on 5.6.4

  When we run a report we are invited to:

  Edit

  Change.

  On my server option change give nothing.

  Change the option suggest:

  Last X period (from now).

  How to run a report from date to date? For example can I run a report for the period from February 15 to February 25?

  How?

  Thank you.

  Use ADSI-> Type = Custom time range

  

  Then set the dates from and to in the range time custom editor:

  

  Kind regards

  Brian Wheeldon

• How to remove the user from the IOM by using Trusted Recon

  We trust Sun to IOM LDAP Recon. We delete usually old Sun LDAP users periodically. According to the requirement, these users should also be eliminated from IOM as well as all its databases that are put into service.
  
  Looks like that, the behavior by default of 'iPlanet Trusted remove user Recon Task' is to set the user status to 'Deleted' and 'Revoked' about the users corresponding IOM and resources put into service. How can I remove users from the IOM as well as the database placed in service in the case of user removed from Sun's LDAP?
  
  Thank you!
  Kabi

  Once a user is created in the IOM, you cannot remove it. As you said, the default behavior for the removal of the recon user approved is that the user will be disabled in IOM and revoked from all target applications. Revoke the user will remove the user from the target applications.

  This is done for the purpose of audit so that later we can determine which users have been removed or terminated.

  But as a you can manually delete the records of user database directly which is not recommended.

• Disable users from the IOM AND ALLOW THEIR MANUELLEMENT in OID...

  Hello
  
  I have connected to OID IOM.
  
  When I disable a user to the IOM, the attribute orclisenabled for this user is set to DISABLED
  Now when I change manually DISABLED active in OID and the task of reconstruction of target, the IOM user remains disabled and when I check the profile of the resources, the user OID resource is ENABLED.
  
  This should not happen. I want the case, when I manually ENABLE users disabled in OID and recon task, the user still needs to get disabled in OID
  
  Is it possible to achieve this condition?

  Hi Elise,.

  I think that the reason is due to the improver method to set the jar file. Simply copy the java code into Notepad and save it as java file only.Compile this java code so that you will get the java class. The you can create c like

  jar filename.jar javafilename.class cf

  Using this command, we can create a jar file. Just try it this way. I think that this will solve your problem.

  Thank you best regards &,.

  Rajesh.

• Firmware of the IOM on switch m6348 failed, incompatibility of fabric

  Update the firmware of the IOM 2 of the 4 m6348 failed to update and report incompatibility of fabric.  I tried the update process again and put back them in place.  They don't have the same power on in the Cabinet to access the console, is it possible to recover?

  The problem was caused because if you link the internal chassis interrrupteurs CMC, updated the firmware on the causes of MCC switches in the chassis of the cycle power and corrupt the update. (this is a trap that should not exist tbh)

  Avoid this problem by connecting the CMC directly or via an external switch during firmware updates.

  The firmware on switches is corrupt, I think that it should be possible to reflash the chips directly however this would require electronic expertise.  In our case, the seller has replaced the switches under warranty and we were able to update those successfully.

• Cold start and the IOM Crash

  I have a client who has 3 different areas, where from time to time (months!) The IOM are crashing, creating a dump file.

  Versions are 2.1.1b and 2.0.4b

  No TAC case open yet; is this a known bug?

  Thanks for any clarification

  Walter.

  Apr 23 07:17:15 192.168.15.16: 2014 23 Apr 07:17:15 CEST: % NOHMS-2-NOHMS_ENV_FEX_OFFLINE: FEX-3 off line (serial number FCH172570Q6)
  Apr 23 07:17:15 192.168.15.16: 2014 23 Apr 07:17:15 CEST: % PFMA-2-FEX_STATUS: 3 Fex is offline now
  Apr 23 07:17:37 192.168.15.16: 2014 23 Apr 07:17:37 CEST: % UCSM-2-EQUIPMENT_INACCESSIBLE: [F0478] [reviews] [material inaccessible] [sys/chassis-3/slot-1] left 3/1 (A) IOM is inaccessible
  Apr 23 07:20:37 192.168.15.16: 2014 23 Apr 07:20:37 CEST: % SATCTRL-FEX3-2-SATCTRL: IOM-0 Module 1: cold start
  Apr 23 07:20:44 192.168.15.16: 2014 23 Apr 07:20:44 CEST: % PFMA-2-FEX_STATUS: Fex 3 is online
  Apr 23 07:20:44 192.168.15.16: 2014 23 Apr 07:20:44 CEST: % NOHMS-2-NOHMS_ENV_FEX_ONLINE: FEX-3 online
  Apr 23 07:20:44 192.168.15.16: 2014 23 Apr 07:20:44 CEST: % PFMA-2-FEX_STATUS: Fex 3 is online
  Apr 23 07:20:45 192.168.15.16: 2014 23 Apr 07:20:45 CEST: % UCSM-2-EQUIPMENT_INACCESSIBLE: [F0478] [authorized] [material inaccessible] [sys/chassis-3/slot-1] left 3/1 (A) IOM is not accessible
  Apr 23 08:21:14 192.168.15.17: 2014 23 Apr 08:21:14 CEST: % PFMA-2-FEX_STATUS: 3 Fex is offline now
  Apr 23 08:21:14 192.168.15.17: 2014 23 Apr 08:21:14 CEST: % NOHMS-2-NOHMS_ENV_FEX_OFFLINE: FEX-3 off line (serial number FCH1725J3LS)
  Apr 23 08:21:38 192.168.15.16: 2014 23 Apr 08:21:37 CEST: % UCSM-2-EQUIPMENT_INACCESSIBLE: [F0478] [reviews] [material inaccessible] [sys/chassis-3/slot-2] IOM right 3/2 (B) is inaccessible
  Apr 23 08:24:32 192.168.15.17: 2014 23 Apr 08:24:32 CEST: % SATCTRL-FEX3-2-SATCTRL: IOM-0 Module 1: cold start
  Apr 23 08:24:40 192.168.15.17: 2014 23 Apr 08:24:40 CEST: % PFMA-2-FEX_STATUS: Fex 3 is online
  Apr 23 08:24:40 192.168.15.17: 2014 23 Apr 08:24:40 CEST: % NOHMS-2-NOHMS_ENV_FEX_ONLINE: FEX-3 online
  Apr 23 08:24:40 192.168.15.17: 2014 23 Apr 08:24:40 CEST: % PFMA-2-FEX_STATUS: Fex 3 is online
  Apr 23 08:25:08 192.168.15.16: 2014 23 Apr 08:25:08 CEST: % UCSM-2-EQUIPMENT_INACCESSIBLE: [F0478] [authorized] [material inaccessible] [sys/chassis-3/slot-2] right 3/2 (B) IOM is not accessible

  These two bugs are pretty much the same thing, you have some questions about them?

  -Kenny

• Failure of the update of the form of the IOM process | Error: Could not execute database read

  Hello

  I encounter the following error when I try to create a new version for a form of OIM Design Console process:

  Description: Could not run the database to read. The database has encountered a problem with the specified SQL query. Solution: Check the database query. Contact your system administrator.

  It does not matter that I use xelsysadm or any system administrator account.

  Details of the environment:

  OIM 11g Release 2 (11.1.2.1.0)

  
  

  
  

  Errors in the logs: (despite following errors I can update IOM DB Tables with SQL through SQL Developer queries)

  
  

  "Class/method: DBPoolManager/getConnection/Exception a few problems: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection"

  
  

  Class/method: DBPoolManager/getConnection/Exception encounter a few problems: error connecting to database recovery. Please check the following

  
  

  Class/method: tcDataBase/writeStatement encounter a few problems: ORA-01407: cannot update ("PRD01_OIM". » « « « SDK ». » SDK_SCHEMA') with the NULL value

  
  

  Class/method: tcTableDataObj/updateImplementation a few problems: {1}

  
  

  Class/method: tcDataBase/rollbackTransaction encounter a few problems: Rollback performed

  
  

  Class/method: tcDataObj/save error: wrong to save SQL operation

  
  

  Please let me know if you have any suggestions.

  
  

  Thank you.
  

  
  

  I found the solution!

  I was going through this blog: OIM 11 g: error after startup server IOM: retrieve the connection at the base

  In the last comment by Amit, he mentioned that the settings IOM - config.xml must be changed.

  So I discovered that IOM-config file. XML from my environment, under directDBConfigParams, url (jdbc thin driver) was wrong because of cloning.

  In addition, OIMFrontEndURL, RMI and SOAP URL were wrong.

  I corrected the and guess what... each utility works...

  However, you don't have to import/export the config of MDS file... you can change these details in the following MBEANs

  1 DirectDB

  2. the discovery

  3 SOAConfig

  > Reboot the server of the IOM.

  I knew this jdbc driver was not, but did not know where to set it up.

  I have listed the error in my last comment, so that if anyone has this problem, the text of this presentation would help.

  Thank you.

• Communication of the IOM - SOA

  Hi all

  I try to configure the IOM and SOA with front-end OSH; After that the installation of the client of the IOM has changed the front-end server URL and the Port, so I need actulize all the parameters with the new FULL domain name.

  Now I can properly access the IOM and the SOA through the web layer, but when I try to view the "Inbox" page within IOM (like xelsysadm) I get this error message:

  Error display list of tasks. Possible reasons could be: 1. connection information for the server SOA are not available. 2 if it is running in Federated mode, the default server is maybe out of service.

  I tried to run in dashboard diagnostic checking Configuration of SOA - IOM, and after resolving all SSL issues now works correctly.

  IOM logs reports this error:

  [2015-04 - 02T 15: 05:58.115 + 02:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.services.workflow.query] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 0054fq3VmfQFw000jzwkno0001Yu000006, 1:24563] [APP: soa-infra] [URI: / identity/faces/home] < oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.getWorkflowContext > in question using ejb session context: Principal is: xelsysadm, the identity is: xelsysadm

  [2015-04 - 02T 15: 05:58.117 + 02:00] [soa_server1] [ERROR] [] [oracle.soa.services.workflow.query] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 0054fq3VmfQFw000jzwkno0001Yu000006, 1:24563] [APP: soa-infra] [URI: / identity/faces/home] <>. internal error in verification Service. [[

  Internal error in the Service of verification for the user xelsysadm. lookupUser.

  Check the underlying exception and fix the error. If the error persists, contact Oracle Support Services.

  ORABPEL-30504

  Internal error in verification Service.

  Internal error in the Service of verification for the user xelsysadm. lookupUser.

  Check the underlying exception and fix the error. If the error persists, contact Oracle Support Services.

  at oracle.bpel.services.workflow.verification.impl.VerificationService.lookupUser(VerificationService.java:4640)

  at oracle.bpel.services.workflow.verification.impl.VerificationService.createWorkflowContextFromSessionContext(VerificationService.java:1423)

  at oracle.bpel.services.workflow.verification.impl.VerificationService.createContextFromRequestObject(VerificationService.java:647)

  at sun.reflect.GeneratedMethodAccessor1273.invoke (unknown Source)

  ....

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: ORABPEL-10509

  User not found.

  User "xelsysadm" is not in the configuration "jazn.com".

  Check if the user exists in the repository specified by configurations. Check the error stack and correct the cause of the error. Contact Oracle Support Services if the error is not repairable.

  at oracle.tip.pc.services.identity.jps.JpsProvider.lookupUser(JpsProvider.java:912)

  at oracle.tip.pc.services.identity.jps.AuthorizationServiceImpl.lookupUser(AuthorizationServiceImpl.java:254)

  at oracle.tip.pc.services.identity.jps.IdentityServiceImpl.lookupUser(IdentityServiceImpl.java:183)

  at oracle.bpel.services.workflow.verification.impl.VerificationService.lookupUser(VerificationService.java:4636)

  ... more than 78

  Caused by: oracle.security.idm.ObjectNotFoundException: No. User found matching the criteria

  at oracle.security.idm.providers.stdldap.util.DirectSearchResponse.initSearch(DirectSearchResponse.java:173)

  to oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse. < init > (NonPagedSearchResponse.java:53)

  to oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse. < init > (NonPagedSearchResponse.java:44)

  at oracle.security.idm.providers.stdldap.util.LDAPRealm.searchUsers(LDAPRealm.java:489)

  at oracle.security.idm.providers.stdldap.LDIdentityStore.search(LDIdentityStore.java:308)

  at oracle.security.idm.providers.stdldap.LDIdentityStore.searchUsers(LDIdentityStore.java:401)

  at oracle.tip.pc.services.identity.jps.JpsProvider.lookupUser(JpsProvider.java:896)

  ... more than 81

  ]]

  [2015-04 - 02T 15: 05:58.120 + 02:00] [soa_server1] [ERROR] [] [oracle.soa.services.workflow.task] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 0054fq3VmfQFw000jzwkno0001Yu000006, 1:24563] [APP: soa-infra] [URI: / identity/faces/home] <>. error in creating reply message for Web Services. [[

  Error in creating reply message for Web Services.

  The entrance to Web Service may be invalid that causes this exception. Check the source of Web Service for accuracy. The entry could also be validated against the XML schema definition that describes the input for the operation. Whether it's valid, it is a system error.

  ORABPEL-30010

  Error in creating reply message for Web Services

  
  

  
  

  Any ideas?

  Thank you

  KK

  KK,

  You can check if oracle.as.soainfra.config-> workflowIdentityConfig-> workflowIdentityConfig.ConfigurationType->-> jpsContextName IOM?

• Re-evaluation of the IOM Trigger password policy

  Did someone come with a good solution to reassess the password of the user policy when they are moved to a new organization?  We have an org with a strategy of (null) password "not expire", and when an incoming connector moves a user from this org for a new org we have no way to either force-expired password for this user or to request a new password expiration period (either retroactive or goes forward).

  Solutions or just ideas?

  Kevin,

  Thank you for your help on this.  Given that the requirement of paramount importance for us is that the IOM has the correct expiry date and does not provide any mechanism to update this through high-level API expiry date we will probably work around and just make the change in the table at the time of the event.

• Examine the properties of system outside the IOM/API

  Hello

  following an alleged error in the system properties of the IOM (11 g Rs PS2, BP04) that prevents the IOM to start properly, I'm trying to find a way to look at all the properties of the system. However, I don't know where to look for them.

  From my understanding, they cannot be in the DB (which schema, what table?) or the MDS, otherwise they would not accessible in a clustered environment.

  Are there clues about that?

  Thank you

  C

  The IOM system properties appear in the table the user XXX_OIM PTY.

  There are other properties for the application server that are in the MDS repository in the location /file/oim-config.xml which are also accessible from the Enterprise Manager console in time grain system run.

  -Kevin

• Create only contractor using the interface of the IOM

  Hello

  We use the PS1 OIM11gR2 on OIM version.

  We have a requirement where in we allowed users to create only the entrepreneur to the IOM, to help create the user features.

  By default, we can create the user of any type (employee, contractor, Contingent, full-time worker), but we want to restrict users to create the user to type only contractor.

  Please let us know how to do the same.

  Thank you

  Hello

  Its a very common condition, if only contractors are allowed to be created from the user interface, then you can make the field into a single loan and fill in the value of the contractor by using code or do contractor default in the UDF.

  I think it should solve your problem.

  ~ J

• No emails sent by the IOM approval process

  Hello

  We have a problem with the mail notifications sent from the element of human task of a BPEL workflow approval in OIM 11 g R2 (SOA 11 g R1):

  On one of our circles of IOM, no approval notification is sent at all, even if they are correctly configured in the element of human task corresponds to the composite SOA. Notifications are sent correctly on another installation of the IOM that uses exactly the same composite.

  There is no trace of the IOM and SOA even try to send these messages, that they appear at all in the "State of the Message page" of the section of the mail Service of the Enterprise Manager user (not even in a "failed" State).

  We already checked:

  • AdminServer, SOAServer, OIMServer and area newspapers (they show no unusual)
  • The composites themselves (identical on both facilities)
  • The configuration of email from UMS driver (identical on both facilities)
  • The JpsContextName in the SDPMessagingServerConfig MBean and jps-config. XML (identical on both facilities)

  What are we missing that could be the cause of this problem?

  Thank you very much!

  Configure you the messaging part and turn notifications on the server SOA?

  In enterprise manager, right-click of your soa server instance, under Administration of SOA, select properties of Notification Workflow.  From there set the Notification Mode and the emails below.

  -Kevin

• OIM 11 g R2 installation question. Failed to create schema of the IOM by using RCU 11.1.2

  I tried to install OIM 11 g R2 on a Windows 2008 R2 64-bit server and were met the following error during the creation of diagrams of IOM. Other patterns, such as metadata, SOA, user's email services and other associated schema creation succeeded. But creating schema IOM took more than 2 minutes and finally it fails with the error below.
  ################################################################
  UCR-6130: Action failed
  UCR-6135: error when trying to execute the action of java.
  ################################################################
  
  Components used:
  OS: Windows Server 2008 R2 64 Bit
  DBS: 11 GR 2 (11.2.0.1)
  UCR: 11.1.2
  
  The first error was ora-12637 package receive failure followed by Table or view does not exist. I couldn't get much information from the IOM and the rcu.log.
  
  I put the processes and the open_cursors session_cached_cursors described in preinstalling OIM 11 g R2 installation step.
  
  Pointers on what will be highly appreciated.
  
  Thank you
  Srini

  Copy the msvcr71.dll rcuHome\jdk\jre\bin inside the installer of the UCR and paste in C:\Windows\SysWOW64.

  Try to rerun the rcu with the new user, i.e. instead of DEV_OIM, run it with DEV_OIM1.

  Or delete the user DEV_OIM first and then use the same user.