THE RINGER VOLUME?

Similar Questions

• Volume buttons control only the ringer volume

  It seems that the volume buttons on the side of the phone just control the ringer volume. On other Android phones, ringtone and Notification volumes have been linked together for ease of use.

  On the Droid Ultra/Maxx, there are four different volumes: media, ringtones, Notifications, and alarms. And none of them are interconnected. It is extremely annoying for many reasons, the main reason being there is no easy way to lower or increase the volume of ringtone and Notifications at the same time by using the volume buttons.

  The ring volume is adjustable to the max, but the text message sound will be very quiet. Or the ring volume can be set down, but text message noise will be very strong.

  Is it possible to fix this?

  
  

• Treo800w does not use the ringer volume, I put

  I have my "phone: known caller ' setting on the standard Treo ringtone type ringer which is preinstalled on the Treo800w." I have the 'ring type' in the Ring, but no matter how high or low, I set the ring volume, that sounds only when the volume control low when a call comes in.  He is so weak that I miss basically every call. I tried to change other ringtones and the same thing happens.  The ringtone seems to work fine when the ringing type is set to 'Increase the circle' but that started to be so weak that it increases not the ringer volume enough before the call to your voicemail.  I need my ringtone to use a volume of your relatively high ring setting. Everyone knows this?  If so, what do you have to solve?

  I got an answer to this, of Paulcalif, in another thread: "have you tried"restart"by removing the battery and put it back in.. ' Try adjusting the volume all the way first, then it reboot. »

  Lil Red: This seems to have worked even though I still think that there is a bug in the software.  If I set the ring volume to a different volume level, the phone doesn't seem to not answer. Well, as long as it sounds strong and most of the time, I'm good to go.

  Message is about: Treo 800w (Sprint)

• Palm alarms of the GER. It will trigger the alarm even if the ringer volume is silent?

  I just upgraded to Palm Pre.

  I work in an office environment in which we have our rings off, which usually means the week of work my ringer is off and I just have on vibrate so I can feel it in my pocket when a call or text comes in.

  With previous phones if you set the alarm, the alarm would still off and make it sound, even if the ringer is turned downwards.

  PRE alarm will always be sound or I'm going to increase the volume of the ringtone to the top every night before I go to bed?  My charger is my bed so hung up that the charger is not a problem.

  Yes always audible alarm if the mute button is on mute, unless the settings in the preferences of the "clock" is not to do so. Open the app clock, the menu drop-down, select Preferences, there is a new option added in one of the latest improvements. 'Ringer turn off' > 'Play the alarm even when' > 'YES '.

• Case of blackBerry Smartphones? The ringer volume?

  Hi just got my first blackberry yesterday and I'm a bit confused about two things... I hope someone can help.

  First of all, what exactly is the case... I noticed on some of the volumes alert there one in and out of the Holster option. I was wondering what it means? I know that is the case, I am just confused with the thing of the entire volume.

  Second, is there a way to lower the volume of the ringtone, I know that you go to profiles and I have it on normal and the ring tones and text are very LOUD. Is there a way to lower these volumes other than silenting them.

  OK, I lied three things...

  in the profiles, which is the only option of phone for?

  I'll try and these for answer you.

  1 case is the black leather cover that is in the box when you bought your BB. It has a magnet on the front which puts your BB sleep when it is inserted and prevents dust and bumps occur.

  2. volume of the ringtone, go to options and scroll down to the tip and you won't be able to adjust all volume, ringtones, etc. of their each profile.

  3 phone only option is exactly that. Only the phone will ring at least before you change the tones/Ringer.

  I hope this helps.

• The ringer volume won't save the IP 6921 phone

  We have a user that when receiving incoming calls, it does not hear it ring. He can hear when it adjusts to it, but it will not ring for calls. I check the settings for the button, and they are all correct.

  Ok

  So first rebuild the ephone-dn and ephone in the CME, and then if it does not, correct move the DN from another phone to see if the issue follows the number or the phone.

• Phones ring Volume blackBerry smart - is there an easier way to adjust the volume?

  I just got my phone today and it seems that the only way to change the ring volume is to go through a series of 6 steps (according to the user's guide).

  Change the default volume for calls

  You can increase or decrease the default volume for calls. The percentage of volume is high, the louder.

  1. in the phone, press the Menu key.

  2. click on Options. 3. Click

  General options.

  4. change the default call Volume field.5. Press on the

  Menu key.

  6. click on Save.

  Has anyone found a faster way? I don't want to have to go through these steps each time that I have enter and exit a meeting not to mention the risks involved if I need to adjust the volume while I'm driving.

  I'd appreciate any help available.

  Thank you.

  After you set the default options, the easiest way is to go to the main menu, use the trackball to move up right and highlight the speaker, click on it and choose the setting that you want (that is to say strong, quiet, phone only, etc.)

  It's the fastest way I've found.

  I hope this helps.

• Grey ringer volume control

  I have a Z3 Compact with Android 5.1.1. The problem is that I can not change the ring volume. I don't have any other sound problems. As you can see from the screenshot, the ringtone volume control is grayed out. Any idea what could be the problem?

  

  You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 80% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• Xperia Z5 too low ring volume

  Hi all

  I used Xperia Z5 almost 3 months and was very happy with my phone until I get 6.0.1. Now I have a very big problem with my phone, it's no longer stereo speakers.

  When I listen to music or watch the volume video game or the game is normal but it not balanced lounder very pregnant top speakers low and worse, is that when someone calls me my ringtone is really really too low it is not possible to hear it.

  I try to repair my phone with Sony comp. it did not work.

  Most likely, if I can't find a solution for this, I'm going to buy another phone and I buy never any phone Sony because I have exactly the same problem of my Xperia Z3 extracts + that is why I bought Z5, but I still have the same problem.

  Thank you

  BR

  I've tried change the ringer volume

• OfficeJet HP 6968: officejet hp 6968, turn off the ringer

  Is it possible to turn off the ringer on an HP Officejet 6968?

  Thank you

  Hello @Kathieh3,

  The steps I have mentioned must be done on the printer screen, not on the computer.

  On the printer screen, press 'Fax'-'settings'-'fax advanced settings'. Once you scroll through the menu options, you will find the "ringing" or "ring volume" option. Select, then reduce the volume.

  Let me know if that helps!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• turn off the ringer only on hp 640 fax

  How can I disable only the ringer and not all the sounds on the HP 640 FAX?

  Hi rmkram,

  I understand that you do not want to disable only the ringer on the fax. I'll try my best to help you with this.

  In the series HP 640 Fax User Guide on page 22, he explains how to adjust the volume.

  Adjust the volume
  You can set the volume level for the ringing and the speaker.
  Ring volume
  .. When the fax is in ready mode to adjust the volume of the ringer, press on...
  Whenever you press the button, it will increase or decrease the volume.
  NOTE: The volume of 0 indicates that the machine does not ring when a call is received.

  I hope that this information help, please let me know how it goes.

  Thank you

• How to turn off the ringer on HP Officejet J4550?

  I recently bought a HP Officejet J4550 all-in-one. I send faxes from time to time, but almost never receive them. I jump out of my chair, whenever the phone rings when I'm sitting at my desk because of the tone coming out of the HP. Is it possible to turn it off or set it to mute?

  Thanks in advance,

  Jesse

  Press the Setup button (top right of the front) to access the configuration Menu.

  Menu Setup > basic setup > the Speaker Volume > Off, then press the OK button.

• turn off the ringer on the envy 7640

  I'm a new 7640 attached to a 2013 end Yosemite running iMac. My wife works from home and I would not have the ringtone on the sound off printer when a call comes in. Is it possible to turn off the ringer, as you can do on a phone?

  Hi @Neilkn,

  Welcome to the Forums of HP Support! I read your post and see that you want to turn off the ringer on the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I've provided the steps to disable the volume of faxes. Hope that helps.

  • On the printer, go to Fax settings.
  • Select the Fax Volume.
  • Select disabled.

  If there is anything else I can help you, let me know. Thank you.

• HP LaserJet Pro M225dw MFP: HP LaserJet Pro M225dw ring volume MFP

  How can I disable the fax sound ring?

  Hello

  Faucet installation the printer, and then select the System Configuration.

  Volume settings and then press ring Volume.

  Select off, then press OK to confirm.

  Shlomi

• Xperia Z5 ring volume

  Updated software 5.1.1 and since then the volume of the ringer goes completely down and will not let me adjust. All other volumes are working properly.

  After turning on again, works for a little while.

  Any ideas?

  I've seen mentioned in another forum. Turned out to be Sim City Metrix. You may have installed this application, and if so, it helps if remove you it?