"The scan of the computer is enabled is no longer" false error

Similar Questions

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• The computer restarted unexpectedly or encountered and unexpected error.

  OK I just got a new computer and while it was installing windows 7 my power went out, and then when I rebooted my computer, I got the message "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I restart the computer only to get the same message, it is a new computer, so I guess he has windows on it because she did not come with a disc, but there is a way tto restart installation I don't know how. Please someone? Just got this computer as a gift for Christmas and I can't even use it :(

  As this is a new computer, it is under warranty.
  Contact the manufacturer.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• The computer restarted unexpectedly or encountered an unexpected error. Windows cannot continue.

  My netbook is out of warranty, it won't start.  I bought what I believe with installed and later put vista upgraded to Windows 7.  He worked for long time but now it goes into a loop to tell me ' the computer restarted unexpectedly or encountered an unexpected error. "  Windows cannot continue.  To install Windows click ok to restart the computer ang, then run the Setup again.  I am not install but it keeps on telling me this.

  Original title: Aspire one Windows 7

  Hello

  You can try the methods on this link: https://support.microsoft.com/en-us/kb/2622803. Hope you still have the back upward with you.

  Keep us on the loop, so once this aid.

  Kind regards

  Angelo bar

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• HP Envy 5660: Win 10-5660 Envy - Scan of the computer is enabled no longer

  I understand that this has been reported several times by others.  No proposed solution does work for me.  Periodically, I get the error message "Scan of the computer is no longer enabled.»  The network connection to the printer has been lost.  This started only after the upgrade to Windows 10.  This is a false message I still able to scan from the printer.

  I uninstalled and reinstalled but false error notifications always appear.  I can easily disable scan of the computer in the management of the scanning and uncheck the box there.  There is a work around.

  Is - this position of HP to use the autour work and waive the functionality of scanning directly from the printer?

  Thank you.

  Hello

  Thank you for using the HP Forums.

  The pop-up message occurs because the software is not able to detect the Scanner (because the Scan of the computer is activated).

  Win 10 uses WSD and WSD is maybe not as reliable (where the popup).

  Maybe you can try a TCP/IP port?  What could reduce disconnect it temporarily.

  Can you try using a TCP/IP port?

  Creating a TCP IP port:

  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  This video resource will show you how do:

  Create & port use TCP IP

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Let us know if it works.

  Otherwise, if you do not use the function "Scan to Computer" regularly, you can always disable.

  Thank you.

• OfficeJet 6700 Premium: scan of the computer is that is no longer enabled network connection has been lost

  "scan of the computer is no longer active network connection has been lost" appears every 10 minutes or so on my "[redacted] Compaq 8200 Elite Minitour Convertible" is connected to "6700 Premium e-All-in-one Officejet - [redacted] H711n.

  I have already run the 'Locator solutions and update".  He finds nothing.

  I don't know what else to do.

  Please provide the following information if anyone can help including:

  The printer model - done

  Complete and detailed problem description-

  Operating system on the computer (including service pack revision) - done

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

• the computer restarted unexpectedly or encountered an unexpected error

  How to fix computer restarted unexpectedly or encountered an unexpected error.

  Hello

  Check using these methods and the next message will be placed on general methods for help.

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  You can use BlueScreenView to stick the BSOD info in a message here.

  NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
  Paste the lines in a message here. Make sure and check the file name section. Also check the time
  in MyEventViewer for more information as possible.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Option to "Remove" USB key by right clicking in the 'Computer' window it is no longer available.

  Using Vista, there is an option to "Remove" a USB key in the drop-down list it with a right-click in the 'Computer' window that lists all of your drives. He was usually right under "Eject" if I remember correctly. Why is it is gone?

  Please note that I am aware, you can also use the option 'Remove the device safely' in the task bar, but this application relates to the command drop-down list as the taskbar icon is a bit heavy and I preferred the speed and convenience to make it quickly through the window of the computer.

  Which is probably causing this problem?

  I see that you have changed your question of 'My Computer' to 'Computer', etc., after my reply to you.

  If your original question was 'Computer', etc., my answer would be more than the only option.

  Computer errors may occur from time to time, to which we have no precise answer.

  See you soon...

  Mick Murphy - Microsoft partner

• Not able to see the contents of the computer management it gices a snap - in error.

  Recently, I had some problems on the computer. So what I did, this is what I do sometimes normally when it is not noticeable.

  Open the windows system event logs just to see if there are some errors arise in there.

  The problem is that, with this time is that I somehow clicked on disk management. I don't have (just woke up) how but when it was still loading so I immediately clicked on where the event log was until I received a notification that did

  Snap broke down, and I think that the FX error message: {b05566ae-fe9c-4363-be05-7a4cbb7cb510}

  My question is:

  Is there something I need to do? Should I be worried because it could have happened because he was still loading disk management? I return to the computer management and it doesn't seem to be showing normally, but I didn't click on anything anyone, just in case.

  As you can probably tell by here, but I know something but certainly not entirely savvy computer especially on Windows

  Thanks in advance!

  You can access the observer of events directly from the command run:
  http://www.Windows-commandline.com/Windows-Event-Viewer-run-command/

  Select Start, run, type eventvwr , and press the ENTER key.

• When I restart the computer, I get 2 boxes of RunDLL error appearing

  Hi guys,.

  When I restart the computer, I get 2 RunDLL error boxes that appear.  They do not seem to affect the performance of the computer, but they must mean something.  If I need, where can I get the new?

  Descriptions of the errors are...

  RunDLL
  THERE WAS A PROBLEM STARTING
  C:\USERS\ROSS\APPDATA\ROAMING\C_28595R.dll
  THE SPECIFIED MODULE COULD NOT BE FOUND

  RunDLL
  THERE WAS A PROBLEM STARTING
  C:\USERS\ROSS\APPDATA\ROAMING\pegibbfcm.dll
  C:\USERS\ROSS\APPDATA\ROAMING\pegibbfcm.dll IS NOT a VALID WIN32 APPLICATION

  I am running Windows 7 and my last update was KB2709981

  Thank you

  Ross_911

  Hello.

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• Wake up the computer with Vista from standby mode, get error SL08-010 Activation exploit

  'Error SL08 - 010 Activation Exploit' is what was on my screen when I woke from my comp to sleep mode.  The small print at the bottom of the page says that if that has not been fixed that I wouldn't be able to use my Windows Vista without putting my computer at risk. How can I fix this prob?

  Hello

  see if this information in the thread below helps you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/SL-08-010-activation-exploit-warninghow-to-solve/44149728-8e5d-E011-8dfc-68b599b31bf5

• Now, many of my keys are shortcut keys. For example, 'L' now disconnect me and "N" takes me to the computer. I can no longer use the keyboard.

  My big cat crossed my laptop keyboard Dell (with Vista) and now many of my key take me in crazy places. This happens in all programs. I can't use the keyboard to type. Is anyone know how it happened and how to fix it?  Thank you very much

  Hi Ruby94947,

  Things you want to try:

  O examine your keyboard for any accumulation of dust, dirt, liquids or other particles that could be causing the keys to type characters.

  Ø Disengagethe (FN) key on the keyboard, make sure that the led of the button turns off.

  O check if your number lock (NumLock) key is enabled. If so, the key to disengage.

  O confirm that your keyboard is set to the English language.

  1. open regional and Language Options by clicking the Start button, click on the Control Panel, clicking clock, language, and region, and then clicking regional and Language Options.

  2. click on the keyboards and languages tab and then click on change keyboards.

  Make sure that the keyboard is set to the English language.

  If the problem persists, contact DELL for assistance.

  http://support.Dell.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.