The selected disk has already a VMFS data store. Select another disc
I am trying to add another storage and he asks me this.
I have disassembled the storage and mount it again. But the identifier will not go away. It uses the same identifier.
I have a second question. I want to add a second iSCSI array. I need to create a second second table vmkernel port or can I use the same for a first table vmkernel port? I do to add a second table on vmware?
Thank you very much for your help
Then, I created a 2 TB (as you saw in the picture) and VMware sees availability of 2 TB.
According to the screen shot it doesn't. It says 2 TB of capacity, but only of 7.84 MB of available space. It seems that your logic unit number is slightly more than 2 TB of size and due to the limitation of SCSI-2 (http://kb.vmware.com/kb/3371739) it is an overflow, which leaves a result of xxTB 2. modulo 2 TB as available disk space. I suggest that you create a to 1.99 LUNS that should work.
André
Tags: VMware
Similar Questions
-
I traced a form of lun 3 t FC storage.
And the project to create a vmfs on this lun, creating, data store, space available by default is 1024 G, no 3 t, so I guess that maybe some limitations.
Anyone know? Thank you very much.
Hello
The limit is 2 TB - 512Bytes
That 512 bytes is VERY important to remember.
You will see that 1 TB as it roles once you exceed 2 tablespoons.
As Anton suggested you can use two 1.5 TB LUN safely. However, you can in fact more than 500 GB LUNS or such. Will the LARGEST you can is not always the most efficient allocation of resources.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
"Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url] -
First New - VM: an element with the same key has already been added.
I get a strange error that I have seen a few other posts, but with no resolution (or at least one that I can find). When you try to create a new virtual machine using the cmdlet New - VM, I get the error "an item with the same key has already been added."Now, here's the key that I've not seen many others to mention. This ONLY happens on the first attempt for each new connection with Connect-VIServer. I can create as many of the same machines that I want after that first mistake with the same settings (new name of course). If I disconnect and reconnect again, the error appears for the first time.
Normally with PowerShell, I have just to catch the error and be on my way. However, in this case I use the parameter - RunAsync, so that I can capture the task that is returned in a variable. From there, I use Wait-task until the virtual machine is complete before moving on with the script. Everything works fine when the error occurs, but when it happens that the object of the task is not returned and the rest of her vomit script errors.
I am running the latest version of PowerCLI and I tried this on PowerShell v2.0 and v3.0 and get the same results. I tried different models and guests without success. I also tried this with and without assistance - AllLinked on Connect-VIServer-bound mode. I should mention that I am cloning model, by specifying a spec customization and host cluster data store. Again, the only common denominator repeatable here is that this ONLY happens on the first attempt to use New - VM session to vCenter.
Any ideas or suggestions?
If this is useful at all, here are the details of the output on the exception:
PS C:\ > $Error [0]
New - VM: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
On line: 1 char: 11
+ $VMTask = new-VM-name "NEWTEST20" - model 'Template' - OS...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [new-VM], VimException)
+ FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVMPS C:\ > $Error [0]. Exception | Select *.
ErrorId: Core_BaseCmdlet_UnknownError
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction:
SessionId:
Login ID: /VIServer=USERNAME@SERVER:443/
Severity: error
Message: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
Data: {ParameterValues}
InnerException: System.ArgumentException: an item with the same key has already been added.
to System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDict
ionary()
at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
taskDescriptionId)
at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
Customer VimClient, accessories 2 dictionary, extensionData object)
to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForCli
ENT > d__7.MoveNext)
System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnume
uidList Maple 1, IEnumerable 1 connectionUidList)
to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
IEnumerable 1 connectionUidList)
to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
IList 1 connectionUidList)
to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
CmdletTaskInfoProvider cmdletTaskInfoProvider)
at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
CmdletTaskInfoProvider cmdletTaskInfoProvider)
VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
options)
to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
MoList list 1)
at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
MoList list 1)
to
VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
TargetSite:
StackTrace:
HelpLink:
Source:PS C:\ > $Error [0]. Exception.InnerException | Select *.
Message: An element with the same key has already been added.
ParamName:
Data: {ConnectionId}
InnerException:
TargetSite: Void Insert (TKey, TValue, Boolean)
StackTrace: At System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
to
VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDictionary)
at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
taskDescriptionId)
at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
Customer VimClient, accessories 2 dictionary, extensionData object)
to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForClient
> d__7.MoveNext)
System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
to
VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnumerable 1)
uidList, IEnumerable 1 connectionUidList)
to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
IEnumerable 1 connectionUidList)
to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
IList 1 connectionUidList)
to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
CmdletTaskInfoProvider cmdletTaskInfoProvider)
at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
CmdletTaskInfoProvider cmdletTaskInfoProvider)
VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
options)
to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
MoList list 1)
at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
MoList list 1)
to
VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
HelpLink:
Source: mscorlibI was informed that this is actually a "known" bug and a fix has already been planned for the release of the future code. After getting the access to a beta version, it does not seem to be fixed in the next release.
-
Please note that the quote/cart has already placed an order and cannot be changed.
Hi all
Currently, we are trying to create an order istore and doing so when you add an item to the cart, shopping cart throws the error "Please note that the quote/cart has already placed an order and cannot be changed. What happens with a single user. We created an order earlier and this was achieved convert quote to order. Now when we created a new this error pops up. Also, there is no record in the IBE_ACTIVE_QUOTES_ALL table for this user for any active carts. Please provide suggestions. I cleared the cache bounced the server istore and disconnected and connected and always the question already exists.
Thank you
Hello
Please confirm that there is no basket of assets
Confirm the data in ibe_active_quotes_all
SQL > select active_quote_id, order_header_id, quote_header_id
of ibe_active_quotes_all
where party_id = & partyid
and cust_account_id = & cust_id;
To get values-
Select customer_id from fnd_user where user_name ===> set to 1
Select person_party_id in the fnd_user where user_name =
Select object_id from hz_relationship where subject_id =
Select cust_account_id in the hz_cust_accounts where party_id ===> value 2 Confirm the data are synchronized in citing it table aso_quote_headers_all:
SQL > select order_id aso_quote_headers_all
where quote_header_id = & from above;
If a basket of assets is found, you can remove-
delete from ibe_active_quotes_all where party_id =and = cust_account_id and record_type = "shopping CART";
> This will remove the active cart of the user, so you can proceed to the next cart.Reference for the discussion:How to remove Active iStore basket of a user (Doc ID 1261926.1)Thank youDebbie -
promotion of iSCSI LUN with the VMFS data store
Hello
I moved an iSCSI on the website of DR SAN and fact volume so that it was accessible to the ESX host on the site of DR based on the IP address and made the new analysis of the adapter for iSCSI Software in the VI Client on the two hosts on the DR site and he discovered the LUN.
I don't want to go to the Configuration, storage and add storage as this reformatted the volume and it has a VMware Server already on it running happily on the main site.
How can I add the volume as a VMFS data store available on the two hosts as he is picked up automatically?
Thank you
Paul
I guess it was a VMFS volume that was used by the ESX environment on main site you, Yes? If you have moved the LUN, i.e. the ESX hosts in the main site no longer have access so that the ESX host at the DR site do not have access, you will need to define EnableResignature = 1 under Advanced settings, LVM
You restart the analysis for storage and you should access your VMFS volume. You will need to register your virtual machines with the new host.
When complete set EnableResignature = 0
-
An element with the same key has already been added
Hi all
I see a strange problem when you try to add a new disk to a virtual computer via powershell
I use the following commands:
Add-PSSnapin VMware.VimAutomation.Core
to connect-viserver-Server $MyVC
$server = "MyServer".
$vm = get - vm $server
$NewDisk = new-disk-hard - VM CapacityGB - $DiskSize - StorageFormat $StorageFormat $VM
When I run it, the drive is added, but what follows is cast in the output:
New hard drive: 24/06/2013-11:04:22 New-harddisk An element with the same key has already been added. On line: 1 char: 11
+ $NewDisk = new-disk-hard - VM $VM CapacityGB - $DiskSize - StorageFormat $StorageForm...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (:)) [new-harddisk], ViError) + FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_NewVirtualHardDisk_ReconfigError, VMware.VimAutomation. ViCore.Cmdlets.Commands.VirtualDevice.NewHardDisk
When I restarted the command in the same pssession and then it is executed without error.
Has anyone seen this behavior before?
This could be a bug?
I searched for this error, but this seems like something very generic...
Thanks in advance!
Filip
Hi Filip,
This looks like the same problem as already reported in first New - VM: an element with the same key has already been added.
-
I downloaded windows xp from mirowsoft up to 6 discs of A which I just it ready for the cd of window xp I don't have.
Hi cjoyner66,
Thanks for posting. I'm confused on 6 discs A you're talking about. Windows XP can not hold on 6 floppy disks if that's what you are referring. If the hard disk has been deleted, you will need to use your Windows XP disk and reinstall Windows using this disk and the key associated with this record. If you don't have XP media, you must contact the OEM of your computer or buy an extra copy of the XP.
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I have my serial number and that you wish to register online, but the message he has already been saved. How can I solve this?
This version has been installed on a server that crashed last week. We just installed Adobe Acrobat professional on my PC and it says I have 30 days to activate it.
Hi danneels,.
Allows you to check with the guest would ask where its giving you information 30 days. on the right corner of this window, you will see the option "software license".
Click this option, and then it will give you register in the window, use your credentials Adobe ID then check if it works or not.
And for the State of serial number request would ask you to go ' adobe.com/getsupport' & it launch a chat session using 'still need help contact us' after following the instructions on the screen. The representative of cat will help you with this using tools
.
Kind regards
Christian
-
Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS
host is having above mess on summer please help on this
I found the correct solution
ESXi 5.1 U3 is the permanent fix for this issue
U3 is fix
-
Add-PSSnapin: an element with the same key has already been added
When you run Add-PSSnapin, I get the above error. This seems to happen if I try to add the snap a second time, but when this happens, none of the power CLI commands are then available up to what the server is restarted.
Add-PSSnapin: an element with the same key has already been added.
At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
+ Add-PSSnapin $SnapinName;
+ ~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [Add-PSSnapin], ArgumentExcept)
ion
+ FullyQualifiedErrorId: System.ArgumentException, Microsoft.PowerShell.Co
mmands. AddPSSnapinCommand
Failure of the attempts to remove the snap-in at this point with:
Remove-PSSnapin: no Windows PowerShell snap-ins for the model
"VmWare.VimAutomation.Core" were found. Check the pattern and then try the
command again.
At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
+ Remove-PSSnapin $SnapinName;
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: InvalidArgument: (VmWare.VimAutomation.Core:Stri
NG) [Remove-PSSnapin], PSArgumentException
+ FullyQualifiedErrorId: NoPSSnapInsFound, Microsoft.PowerShell.Commands.R
emovePSSnapinCommand
I already tried to uninstall the dll and put it back, that makes no difference
$dllpath = "C:\Program Files (x 86) \Vmware\Infrastructure\vSphere PowerCLI\VMWare.VimAutomation.VICore.Cmdlets.dll.
$SnapinName = "VmWare.VimAutomation.Core".
#get the path to instalutil
$path = [System.Runtime.InteropServices.RuntimeEnvironment]::GetRuntimeDirectory();
#create an alise for installtuil
set-alias installutil (resolve-path (join-path $path 'installutil.exe'));
#uninstall snap
InstallUtil /u $dllpath;
InstallUtil $dllpath;
I tried appdomain unloading, then adding the snap-in with the same result:
$appdomain = [AppDomain]: CurrentDomain
$appdomain. # Of unloading | Out-Null
Add-PSSnapin "VMware.VimAutomation.Core".
$appdomain. Load
Everything simply jump beyond the error is not good because it is impossible to find the following commands:
Add-PSSnapin "VMware.VimAutomation.Core" - ErrorAction SilentlyContinue
Get - VM $VirtualMachine
The term 'Get - VM' is not recognized as the name of a cmdlet, function, script file, or an executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.
Any help to fix this would be greatly appreciated.
Thank you
OK, I was kind of what went wrong here.
The snap has been loaded from a powershell module. When the module is removed and added again, the snap ceases to function, but also can not be added again.
If the snap is loaded first outside the module everything works fine until you try never to remove or add snap-in module.
-
PowerCLI - an element with the same key has already been added ERROR
Hello
I opened a case with VMware on a problem using PowerCLI. And pretty well, they said that they do not support scripts... But the error is not related to any script. It is related to the first command I run against one of our Vcenter and we have 6 of them.
Everything worked well until we went from 4.1 to 5.1
I can connect to our VCenter fine, but the first command always give an error and fail to the powercli but the task still occur in vCenter.
When it gets ugly, is we have several powershell script to maintain and automate our environment but now these script fail.
Example, we have a script to deploy the VM model and then configure the appropriate hardware configuration and add Notes and custom attributes. But the script fails after that deployment so the rest will not run. It will be possible that deploy us to the first virtual machine.
So for 'Band-aid' question, I added a line to my script to start a virtual dummy machine, to make sure that what is in the script will work fine.
Error:
PowerCLI C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > start-vm vm - Server-m46
Start-VM: 2013/06/26 11:57:05 Start-VM an element with the same key has already been added.
Online: 1 character: 9 + start-vm < < < <-vm server-m46 + CategoryInfo: NotSpecified: (:)) [start-VM], ViError + FullyQualifiedErrorId: Client20_VMServiceImpl_StartVM_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.StartVM)
As far as I know, done to the PowerCLI VMware supports.
I don't think they support the client script debugging, but the product PowerCLI itself is supported.
I created a few calls myself in the past.
What you see is a known problem, there are a few discussions in this community who has something similar.
-
Hi all
Please help with error - "Please note that the quote/cart has already placed an order and cannot be changed."
I am able to search for items in the store but when add to cart we get error "Please take note that the cart/quote has already been placed an order and cannot be changed."
We do not process returns in our iStore.
Thank you
Subin.
Okay, okay...
See if you have any folder for that user in the IBE_ACTIVE_QUOTES_ALL table, if so delete it and try again...
IBE_ACTIVE_QUOTES_ALL is used to store the current active cart of a user.
The user is identified by party_id cust_account_id reference HZ_PARTIES and the active carriage is identified by the quote_header_id referri
-
Size = size of the VMFS data store VMDK?
Is it possible to create a single vmdk equal to the size of a vmfs data store he created in or is it a load element used by vCenter/ESXi.
I am using vSphere 4 and VMFS data warehouses are in format VMFS 3.33.
You can't if it is the main drive of a virtual machine and the virtual machine configuration files etc receive on the same data store as the virtual machine directly to the output that the bat will need extra space for a brief amount. For a data reader, this should be possible since there should not be any files will use the space.
-
I hava the key which has a lot of data, how can I led all data
In the database for duplicates, I hava the key which has a lot of data, how can I remove all the data.such as I hava key: aaa, but the data has three: 123, 234, 456, how I can del the 123,234,456, I used the cursor to del (Cursor.delete ()), but I can only led the first have: 123 and used the cursor.count method) , I find the method return 2 for me. and my question is how to remove the two remained. Thank you allAfter calling Cursor.delete, call Cursor.getNextDup to move to the next double, then call Cursor.delete again and repeat.
-mark
-
Using a desktop PC I'm opening a PDF file and trying to save as a WORD document. The application continues to send me subscribe to convert the document that I already did before. Is there another way I should try to convert?
The see often when someone pays for a product buy us tries to use another. Less often if the subscription fails.
So, what exactly did you pay?
Maybe you are looking for
-
Equium U400-124: no CD/DVD drive in my computer - error 10
Hi newbie so please bear with me. East - the best place for me to post? Have a problem with my Equium U400-124 cd player.It does not appear in my computer and get an error 10 than TOSCDSPD.exe is not found. Searched on the partitioned part of the cor
-
The Omni 10 will be damaged by attaching to a powered usb hub? I need to get a micro usb hub to attach the mouse and wireless keyboard.
-
KB2416473 of security for Vista offered repeatedly update
Original title: KB2416473 for Vista__ security update This continues to download. Can I install it "successfully" and then it starts to download again dozens of times a day. I tried to restart. How can I stop it?
-
Windows Vista crashes when updates are being installed
Regularly, I keep my windows vista up-to-date. However, recently the windows vista displays update 5 new installs is required to close to 400 MB in total. the windows update starts about 5 minutes after the connection automatically, and will reach ab
-
If I try to install programs by downloading fromm the internt (lately a program to draw and make calculations on financial data) I do not pass. The error message is the following: Uninstall Shield Wizard is in use Turn the power off before trying aga