The software MediaSmart and Netflix

Similar Questions

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• What is the difference between the "Software Version" and "Version of the platform?

  I posted in this forum, because there is a maximum activity in this forum. Sorry, if this is not a good place to post this kind of question.

  What is the difference between the "Software Version" and "Version of the platform" of any blackberry device?

  My camera's curve 8900 and I can see in the menu About his version of software is 4.6.1.231 and the version of the platform is 4.2.0.108. What are these 2 versions for?

  Probably the best posted in the software section of the device, but is not serious.

  Version of the software/App - indicates the version of your applications (address book, browser, calendar, etc.).
  Version of the platform - indicates your version of system software (Java based software, radio code, etc.).

• Hello; During the installation of the Software Photoshop and lightroom, there s blocked has the known installation 'wait '. What needs to be done?

  Hello; During the installation of the Software Photoshop and lightroom, there s blocked has the known installation 'wait '. What needs to be done?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• I want to buy the Photoshop now, but I'm pretending to change my computer very soon. If I buy the software now and install in my current computer, when I buy a new one, I can't install the new with the same license free of charge?

  I want to buy the Photoshop now, but I'm pretending to change my computer very soon. If I buy the software now and install in my computer run, when I buy a new one, I can't install the new with the same license free of charge?

  Did you want to say «which intends "instead of"pretend"?»  Assuming you did, the short answer is Yes.

  If you purchase a perpetual license for Photoshop CS6, you want to deactivate the software on your old system before installing it on your new system.

  If your goal is to reach the creative cloud, all you have to do is disconnect on the old system and the newspaper in the new system during the new installation of creative cloud with your Adobe ID

  I don't know where you intend to purchase your license, but I suggest on sources other than Adobe themselves.  There are a lot of fakers / scammers out there.

  -Christmas

• Lost the software CD and need to download the drivers?

  Have you ever had your printer for a long period of time and lost the CD for it?

  Have you already moved and misplaced the software CD?

  No worries! The link below has all the drivers and software necessary. Go and type your printer name or product number. Select your Operatin system, then choose your driver.

  http://WWW8.HP.com/us/en/support-drivers.html

  It's the best way to get your drivers when you have misplaced your CD

  Hope this helps everyone.

• Bought the software online and can't download it

  I bought software online and I can't down it load, I get the message "system admintrator put air."

  Hello

  could you please proved the following information

  Where did you purchase the software

  What software did you buy

  Most likely, this is a question about the site, and you should contact the site administrator.
  You may have to enable you to download and then you have to wait awhile before you can download.

  Kind regards

  Joel

• Should I delete the Software Design and Web Premium CS6 from my computer?

  I recently bought a subscription to creative cloud and downloaded all the software on my desktop. Should I now delete the software and Design and Web from my computer?

  Hi Bafman1,

  It is up to you! CC and CS6 are distinct and not interfering is not with others. You can safely leave
  CS6 installed on your PC.

  Can I install both CS6 and CC apps on my computer? 'Caveat Lector.

  
  

  Kind regards

  Maurice

  This answer was helpful? Please consider marking it as 'Useful' or 'Right answer' (as appropriate) to help future customers with the same problem. Thank you!

• How to re - install the software OS and Thinkpad after hardware upgrade?

  I'm about to buy a SSD for my X 220.

  My recovery partition is on my current hard drive, so instead of the backup and restore of the entire hard drive, (I make a smaller hard drive) I want to restore the system from the recovery partition (new installation).

  How can I do? It works if I turn the internal hard drive externally using the attachment? But I think that it will not boot from that disk hard if I do that, then I don't know how to recover my OS X 220.

  Thank you.

  1. what, to buy a license? Do you have the ms COA sticker in the battery compartment?

  2. prepare the recovery media factory applet suitable the disk with Lenovo system preloaded. It could be the flash drive, 16 GB in size.

  3. it is possible to deploy two image .wim of partitions, one by one, Lenovo_Recovery on the drive target and its System_DRV and system parttions. But it also will some actions to set the parameters of the partitions.
  In a Word, there are several scenarios. Take a look this post, for example:
  https://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/restoring-OS-and-drivers-after-x230-HDD-repla...

• Unable to activate bluetooth for pc Dell 1545. Downloading the software? and still not able to turn on bluetooth. Control Panel doesn't recognize all bluetooth connectivity

  Check updates for bluetooth and found 2 on Dell updates. Downloaded both, but when entering the control panel and clicking Add, nothing happens. Do not see the bluetooth icon on the task bars and no ACK on Control Panel

  Hello
   
  Do you see excalamtion mark next to the bluetooth module in Device Manager?
   
  Also check if the bluetooth module is listed in the Device Manager.
   
  Follow these steps and check if they help.
   
  Step 1:
   
  Make your devices bluetooth discoverable and taken in charge by your operating system.
   
  Step 2:
   
  Uninstall and reinstall the Device Manager bluetooth modules, and check if it helps.
   
  a. Click Start, type "Device Manager" in the search box and press ENTER.
  b. click on continue. The Device Manager dialog box appears.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the list of device types, click bluetooth module,
  d. right click on the device, and then click Properties.
  e. click on the driver tab.
  f. click on uninstall. Click OK.
  g. in the Device Manager dialog box, click the Action menu and click Scan for hardware changes.
  h. restart the computer automatically reinstall the drivers.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have most of the software UTD and the magic mouse 2.  I continue to have these episodes where Safari zoomed spontaneously and I can't cancel it without hitting the back button of the browser.  Did someone came across this?

  On an IMac 27 "OS is El Capitan 10.11.2 Magic Mouse 2, Safari 9.0.2

  Seen the episodes while in Safari, it suddenly zoomed in and let even me not to scroll the page.  I have to click on the back button to cancel it. It seems to happen spontaneously, but my hand is still physically on the mouse, just I don't do anything with or to the mouse.  Seems to be developed after I went to the Magic Mouse 2.  Any ideas?

  Please, open the mouse in system preferences and uncheck that smart zoom.

• do not see the fontawsome icons and scripts in local

  Hello world
  I had a very serious problem on my Firefox
  I test two things on my localhost:
  1. a script is just a form, from another Web site
  < script src = "" rel = 'nofollow' > http://www.hotelscombined.com/SearchBox/237175' > < / script >
  2 and another is fontawsome that I test it on locally on a HTML template
  the problem is that no one does not display and I don't know why.
  I think it's because Firefox does not allow for foreign or Canadian connection
  How can I solve this
  Please guide me
  Thanks in advance

  Which shows no error for me
  But I installed the software "easyphp" and my record on this matter.
  has solved the problem and it works well...
  Thanks a lot for your excellent support
  Thank you

• I click on the firefox icon and it appears: firefix.exe - Bad Image I can't open even to click on one of the ideas of troubleshooting

  I already turned on my computer and x 5. Whenever I click on the firefox icon this box appears:
  C:\Program Files (x 86) \Mozilla Firefox\mozglue.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. (This happened with the laptop and I have no idea who is a system administrator) While I was just online the computer locked up then he said he was doing the updates. I closed the computer and now when I try and open the above happens. Mozilla is my home page. I was able to click on internet explore to get to this stage.

  do a clean reinstall and remove the Firefox program folder before reinstalling a new copy of Firefox.

  • C:\Program Files\Mozilla Firefox\
  • http://KB.mozillazine.org/Installation_directory

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 16.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Can I use the new remote and SIRI to select HomeVideo movies on my iMac

  I have more than 1,000 movies from my personal library on the hard drive of my iMac. In the past, the only way to select one was to scroll, scroll and scroll up to what I got. I was told I could use SIRI to ask for the film. When I tried, it chose the Apple or Netflix movie but ignored my Home Video option... I ask something not supported?

  Siri is currently no visibility to personal media.

  Research on your Apple TV (4th generation) - Apple Support

  When you are looking for content with Siri or the application of the research, the Apple TV checks these content providers, with more to come soon:

  • United States: Film and television shows in iTunes, HBO GO HBO NOW, Hulu, Netflix, SHOWTIME, SHOWTIME anytime
  • Australia, Canada, France, Germany and United Kingdom: movies and television shows available on the iTunes Store and Netflix
  • Other countries and regions: movies in iTunes