The spinning globe stopped spinning

Hi, I wiped the hard drive and then it was reinstall mac os x my Mac suddenly stop.

I start upward and there where I got the question mark (?) flashes then I stopped and start it

with the recovery mode and where I found the spinning globe, once he tells me to choose

network I choose, then the whole world takes couble of routations and it frezes.

I have no idea what is my mac doing or trying to do, as far as I know is that I erased

the hard disk and there is no mac os x

A flashing question mark appears when you start your Mac

Mac OS X: gray screen appears during startup

If your computer is shipped with the system disks, try from them - disk #1.  Also run the hardware test - Macs with Intel processors: using Apple Hardware Test

It is very difficult to offer suggestions of troubleshooting when using the 'version of the os' is unknown as each os has their own troubleshooting solutions.

Tags: Notebooks

Similar Questions

  • How to stop the spinning wheel?

    I'm trying to connect to Adobe CC in my iMac and I get the spinning wheel...

    How can I leave it?

    Thank you...

    These FAQS should help:

    FAQ: What should I do if I get a blank white screen, spinning wheel, or my CC application does not open?

    FAQ: How can I reset my activations?

  • I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

    I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

    Hello Kluggerjo,

    Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

    I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

    If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

    If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

    If you experience any problems or have any questions, please let us know. The entire community is here to help.
    -Best regards

  • I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

    I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

    It is easier to go to YouTube, which I prefer not to do.

    < published by host >

    It's real comments to your message:

    You talk to other users here, not to Apple directly.

    Click below and select the product (s) on which you have any concerns or suggestions:

    http://www.Apple.com/feedback/

    Then select your product

    When you contact Apple to give them feedback, note the statement at the top of this page:

    'Use the form below to send us your comments. We read all comments

    carefully, but please note that we cannot respond to comments you

    submit. »

  • Slow to start, the spinning wheel of death and typing delayed.

    Hello! Lately my MBPR 15 inch, early 2013, responds slowly. I currently have El Capitan 10.11.3 installed. The start-up took longer when I had installed Yosemite. After I login, Finder become spinning wheel for at least 10 seconds while it is slow to respond and asks to load time has increased. Randomly when I type, as I am now typing, he rowed for a short period of time, then becomes the spinning wheel.

    Here is my EtreCheck

    EtreCheck version: 2.7.5 (235)

    Report generated 2016-01-19 16:33:51

    Download EtreCheck from http://etrecheck.com

    Time 01:38

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Click on the link [check files] help with unknown files.

    Problem: Computer is too slow

    Description:

    Slow start, the finder is slow to start after that opening session and application loading of the shifts in time and beach balls.

    Hardware Information:

    MacBook Pro (retina, 15 inches, beginning 2013)

    [Data sheet] - [User Guide] - [Warranty & Service]

    MacBook Pro - model: MacBookPro10, 1

    1 2.4 GHz Intel Core i7 CPU: 4 strands

    8 GB RAM not extensible

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en0: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 579 - SN = D863493Q0HCDNMHBD

    Video information:

    Graphics Intel HD 4000

    Color LCD 2880 x 1800

    NVIDIA GeForce GT 650M - VRAM: 1024 MB

    Software:

    OS X El Capitan 10.11.3 (15 d 21) - since startup time: less than an hour

    Disc information:

    SD256E SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

    EFI (disk0s1) : 210 MB

    Mac OS X (disk0s2) /: 170,14 (Go 37.20 free) - 67 errors

    Drive failure!

    HD (disk0s3) [recovery] recovery: 650 MB

    BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 80,00 (GB 27,43 free)

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Razer Razer DeathAdder Chroma

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Configuration files:

    / etc/hosts - Count: 74

    Guardian:

    Mac App Store and identified developers

    Unknown files:

    / Library/LaunchAgents/com. Splashtop.streamer - for - use .plist

    / Library/LaunchDaemons/com. Splashtop.streamer - daemon.plist

    / Library/LaunchAgents/com. Splashtop.streamer - for - root.plist

    / Library/LaunchAgents/com. Citrix.AuthManager_Mac.plist

    / Library/LaunchAgents/com. Citrix.ReceiverHelper.plist

    / Library/LaunchAgents/com. Citrix.ServiceRecords.plist

    6 unknown files found. [Check files]

    Kernel extensions:

    / System/Library/Extensions

    com [no charge]. Cycling74.driver.Soundflower (1.6.6 - 10.6 SDK) [Support]

    [no charge] com.mice.driver.Wireless360Controller (1.0.0d11) [Support]

    [no charge] com.mice.driver.WirelessGamingReceiver (1.0.0d11) [Support]

    [no charge] com.mice.driver.Xbox360Controller (1.0.0d11) [Support]

    [no charge] com.novationmusic.driver.USB.Audio (2.3) [Support]

    com.Numark.NS6.USB [no charge] (2.1.18 - 10.7 SDK) [Support]

    com.Numark.ns7.USB [no charge] (2.1.18 - 10.7 SDK) [Support]

    com.Numark.v7.USB [no charge] (2.1.18 - 10.7 SDK) [Support]

    [no charge] com.ploytec.xonedx.USB (2.0.2) [Support]

    /System/Library/Extensions/NumarkNS6Audio.kext/contents/plugins

    com.Numark.NS6.usb_TIGER [no charge] (2.1.18 - 10.4 SDK) [Support]

    /System/Library/Extensions/NumarkNS7Audio.kext/contents/plugins

    com.Numark.ns7.usb_TIGER [no charge] (2.1.18 - 10.4 SDK) [Support]

    /System/Library/Extensions/NumarkV7Audio.kext/contents/plugins

    com.numark.V7.usb_TIGER [no charge] (2.1.18 - 10.4 SDK) [Support]

    /System/Library/Extensions/XONE_DX.kext/contents/plugins

    [no charge] com.ploytec.xonedx.usb_TIGER (2.0.2) [Support]

    Startup items:

    360ControlDaemon: path: / Library/StartupItems/360ControlDaemon

    Startup items are obsolete in OS X Yosemite

    Launch officers:

    [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

    [operation] com.citrix.AuthManager_Mac.plist [Support]

    [operation] com.citrix.ReceiverHelper.plist [Support]

    [operation] com.citrix.ServiceRecords.plist [Support]

    [loading] com.google.keystone.agent.plist [Support]

    [loading] com.oracle.java.Java - Updater.plist [Support]

    [loading] com.splashtop.streamer - for - root.plist [Support]

    [crash] com.splashtop.streamer - to - use .plist [Support] [details]

    [loading] com.teamviewer.teamviewer.plist [Support]

    [loading] com.teamviewer.teamviewer_desktop.plist [Support]

    [loading] org.macosforge.xquartz.startx.plist [Support]

    Launch demons:

    [loading] com.adobe.SwitchBoard.plist [Support]

    [loading] com.adobe.fpsaud.plist [Support]

    [loading] com.ea.origin.ESHelper.plist [Support]

    [loading] com.google.keystone.daemon.plist [Support]

    [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

    [loading] com.microsoft.autoupdate.helpertool.plist [Support]

    [loading] com.microsoft.office.licensing.helper.plist [Support]

    [loading] com.microsoft.office.licensingV2.helper.plist [Support]

    [loading] com.oracle.java.Helper - Tool.plist [Support]

    [loading] com.oracle.java.JavaUpdateHelper.plist [Support]

    [out] com.splashtop.streamer - daemon.plist [Support]

    [loading] com.teamviewer.teamviewer_service.plist [Support]

    [loading] net.sourceforge.MonolingualHelper.plist [Support]

    [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    NIHardwareAgent Application (/ Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)

    Other applications:

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.EtreCheck

    com.fiplab.MemoryCleanHelper [loading]

    [ongoing] com.fiplab.memoryclean.54752

    com.native-[ongoing] instruments.NIHardwareService.14112

    Plug-ins Internet:

    CS ChemDraw Pro: Version: 12.0.3 [Support]

    o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

    Unity Web Player: Version: UnityPlayer version 4.5.2f1 - 10.6 SDK [Support]

    Default browser: Version: 601 - SDK 10.11

    AdobeAAMDetect: Version: 1.0.0.0 - 10.6 [Support] SDK AdobeAAMDetect

    FlashPlayer - 10.6: Version: 20.0.0.267 - SDK 10.6 [Support]

    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]

    QuickTime Plugin: Version: 7.7.3

    Flash Player: Version: 20.0.0.267 - SDK 10.6 obsolete! Update

    CitrixICAClientPlugIn: Version: 11.9.0 - SDK 10.9 [Support]

    SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 [Support]

    googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

    JavaAppletPlugin: Version: 31 to check the version of Java 8 update

    Safari extensions:

    AdBlock

    BetterTTV

    Audio Plug-ins:

    NumarkNS6AudioHAL: Version: Unknown - SDK 10.7 [Support]

    NumarkV7AudioHAL: Version: Unknown - SDK 10.7 [Support]

    XONE_DX: Version: unknown [Support]

    NumarkNS7AudioHAL: Version: Unknown - SDK 10.7 [Support]

    3rd party preference panes:

    Flash Player [Support]

    Growl [Support]

    Java [Support]

    XBox 360 controllers [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Mac OS X: disk size: 170,14 GB disc used: 132,94 GB

    Destinations:

    Tony DHM [Local]

    Total size: 999,86 GB

    Total number of backups: 19

    An older backup: 07/03/14, 12:25

    Last backup: 12/01/16 15:41

    Size of backup drive: Excellent

    Backup size GB 999,86 > (disk size 170,14 GB X 3)

    Top of page process CPU:

    6% WindowServer

    kernel_task 2%

    2% fontd

    Pier 1%

    0% cloudpaird

    Top of page process of memory:

    Kernel_task 695 MB

    Com.apple.WebKit.WebContent (2) 319 MB

    Safari of 197 MB

    Ocspd 172 MB

    Mdworker (11) 164 MB

    Virtual memory information:

    3.69 GB of free RAM

    used 4.30 GB RAM (2.73 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    19 January 2016, 16:19:10 self-test - spent

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234624_[redacted].c 18 January 2016, 23:46:24

    / System/Library/CoreServices/sharedfilelistd

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234523_[redacted].c 18 January 2016, 23:45:23

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234422_[redacted].c 18 January 2016, 23:44:22

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234323_[redacted].c 18 January 2016, 23:43:23

    January 18, 2016, eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234214_[redacted].c 23:42:14

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234117_[redacted].c 18 January 2016, 23:41:17

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-234020_[redacted].c 18 January 2016, 23:40:20

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233925_[redacted].c 18 January 2016, 23:39:25

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233830_[redacted].c 18 January 2016, 23:38:30

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233737_[redacted].c 18 January 2016, 23:37:37

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233635_[redacted].c 18 January 2016, 23:36:35

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233543_[redacted].c 18 January 2016, 23:35:43

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233453_[redacted].c 18 January 2016, 23:34:53

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233403_[redacted].c 18 January 2016, 23:34:03

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233315_[redacted].c 18 January 2016, 23:33:15

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233227_[redacted].c 18 January 2016, 23:32:27

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233142_[redacted].c 18 January 2016, 23:31:42

    January 18, 2016, eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233048_[redacted].c 23:30:48

    January 18, 2016, eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-233004_[redacted].c 23:30:04

    Eruption of ~/Library/Logs/DiagnosticReports/sharedfilelistd_2016-01-18-232920_[redacted].c 18 January 2016, 23:29:20

    January 17, 2016, 22:57:05 /Library/Logs/DiagnosticReports/Messages_2016-01-17-225705_[redacted].hang

    /Applications/messages.app/Contents/MacOS/messages

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • iMac froze on Start up on the Apple logo and the spinning wheel.

    Hello

    Can someone please help. My iMac started freezing when I clicked on any application or attempted to open anything. I turned it off the power and then turn it back on. Now I just get the apple logo with the spinning wheel down on white background. I tried to close again and reboot hold command + s, Ctrl + r, Ctrl + p + r, but nothing can get past the logo and the spinning wheel. I'm running snow leopard top and it worked fine until a couple of days. I can't on the utility disk or anythong at all. I'm not the most intelligent in the computers and it has me really stumped. Any kind soul can help with some info?

    KND regards,

    nicheda

    Before doing all this, what is your status of backup? You have Time Machine or a clone of your hard drive? If this isn't the case, it may be best to do nothing until you are able to see if you can find a way to save your data if things go from bad to worse.

    That said, assuming you are running OSX 10.5.8 (like on your profile) or Snow Leopard (according to the guidelines of this forum), have you tried starting restoring 1 gray disc that came with the Mac or the Snow Leopard installation disc? Insert the startup disk by holding down the c"" key. You may need to push the disc for the CD/DVD drive so that it can swallow the disk when you start if you can't get the Mac to accept the drive in its current state.

    If all goes well it will boot from the gray disk, although slowly. Once started go to the Menu utilities > disk utility. Launch disk utility, select Macintosh HD and click on "repair disk". If changes are made click on repair disk again and repeat until you get a clean pass. Once that is done, try to restart normally in the Apple menu.

  • Whenever I run the application LR CC, it crashes. The spinning wheel of death appears and I have to force quit. What is going on?

    Whenever I run the application LR CC, it crashes. The spinning wheel of death appears and I have to force quit. What is going on?

    Kristina,

    I wonder if you can encounter the same problem I am. The same thing happens to me, however, rather than force quit Lightroom, I let stand for about 5 minutes and then everything seems to work. Are you using 2015.4? If so, you could try to roll back to 2015.3, which is what I've done Adobe sinus support could not solve my problem. You can also try to create another user account and open Lightroom. The problem is gone then, and this is the point at which Adobe support said it was an OS X problem and not a problem of Adobe.

  • My CC desktop application does not open. All I get is the spinning wheel of death. Went to lunch, still running.

    My CC desktop application does not open. All I get is the spinning wheel of death. Went to lunch, still running.

    Does not open App | Wheels of progress turn continuously

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

  • My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    Hi Joshua,.

    I think you found the turning wheel on the Adobe CC application.

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    You can also view the nets below where this issue has been addressed:

    Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

    Creative Cloud Desktop App taped blue spinning wheel after update.

    Kind regards

    Sheena

  • export with the line of the spine

    I can't understand how to export the pdf file with a line of the spine along the "spreads". I see an option under "marks and bleed.

    You must draw manually. (I hope you did your layout with unique pages).

  • Why my docs insert two pages to the right of the spine?

    Hello

    I produce a catalogue with 23 chapters or more, so I have a lot of docs and I'm adding them to an InDesign Book(After I have filled them with content). The chapter/article begins always start on a right-hand page, the issue im having is that when the pages are inserted in any model number same chapter it will add them to the right of the spine. I have attached a screenshot showing the offending document "Pages" Panel. It adds to the right of the spine, even not in a book.

    Please, someone enlighten us, thank you.

    pagespanel.png

    Long shot, but check to be sure of brewing is permitted in the wheel of the Pages panel menu.

    If this is not it, try removing minor corruption by exporting

  • Mixtures: Difference between open and closed, change the spine

    OK, just had a breakthrough today on the gradient tool.

    The difference between closed and open is critical when you want to change a spine mix, as it curved. Between open paths, he has no spine indicated when a mixture is created. Never noticed this? Between the closed paths, there is a spinal column, which can be modified, making as it curved. Now the trick is how to change a spine with paths open when there is no spinal column shown. Found out today that starting with a closed path, segments can be removed to make the open path, then the spine can be changed and maintained the State of open path!

    It of a big bug in Illustrator and makes no sense to me. Eager to Adobe to fix this in the next major release. Hope this helps anyone struggling with this problem.

    Create your open paths and create a thorn. This must have no shot and no fill. Then select your paths and the spinal column, and then create the mix. I guess that create you it via the menu is not clicking with the gradient tool.

  • [CS5] Master page item affecting the spine

    Hello

    I get a weird behavior of CS5, where the program includes elements of master page wrong. I noticed this first on a file converted from CS3.

    I tried in vain to replicate this constantly in a new file. Master page items from time to time will appear on the opposite page if they affect the spine. Everyone knows something similar? Once this has happened once in the file, however, it doesn't go away. I have attached a three file idml page with just a few black boxes on the master page.

    http://www.sendspace.com/file/56hpgt

    It seems to me that the frame on the left is actually extending into the right page by a fraction of a millimeter which is samll as long as it is rounded to 0.

    If you select the check box to the left, set the ruler origin to the sovereign on the spine (for some reason, that which seems to be necessary), and then select a power of Attorney law-ege point in the transformation of the power of Attorney and re - enter 0 in the abscissa filed it seems to correct itself.

  • Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

    Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

    Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

  • Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?

    Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?

    It's a scam. Give them nothing.
    Contact your local police.

Maybe you are looking for

  • IMovie ' 08

    Hello I currently own an iMac ' 08 running OS X Yosemite. I love making movies then I have been using IMovie ' 08 (Version 7.1.4), but recently discovered I could download a newer version on the Apple site. So I did it, I downloaded IMovie 9.0.9 and

  • Fix utility wipe original programs on Satellite L300D?

    Sorry, this is a repost of a previous question, but this time I will keep it very short.I have no answer, and maybe it's because my message was too long. Whenever I have download anything, my L300D tells me that the file is corrupted. Unless I can fi

  • After putting the computer back to factory settings, there is no internet connection in XP

    I just put my moms old computer back to the factory setting and mounted a new ethernet card. His ISP is Virgin Media, which you do not receive a disc for. Usually, it connects via a wireless D.Link router and its operating system is Windows XP. When

  • 0X3bc3 error code

    Help, please. A virus (?) closed down my computer a Toshiba Satellite A205-S5879 with Windows Vista.  Now Windows will not boot.  So far, I burned a Bit Defender spare scanned and removed the virus.  I am unable to boot in F8 safe mode.  I used the V

  • Windows vista hangs at login screen, not responding not the mouse, keyboard not to react.

    My father called me and is a problem with his laptop.  It is running Vista Edition family Basic.  It starts and gets to the screen where you type your password, but freezes it.  The mouse is not active, and it can not type his password.  When you try