The stall when installing Apple drivers

Similar Questions

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Re: Qosmio G30 - RAID of the problems when installing the OS

  I got my Qosmio G30-161 for half a year and he had thought should be time to reinstall everything, so I could get rid of things I didn't need (programs, viruses and uninteresting video clips).

  So I took my XP MCE Cd and tried to install, and I am guided me through and come to the place where I had to choose between unknown 1st and 2nd 3rd stripping mirrored. I chose the stripping as I wanted my drives to be in one. Then when I pressed "next" it gave me the error message "1005 - HDD is not ready?

  I tried to go into the BIOS and change the setting of different parameters of Toshiba told me to, but he also warned that if I changed my OS settings will need to be reinstalled. No problem. But I still get the same message error "disk is not ready?". So now, I have to use a computer other than mine to check the forums and mail etc.

  Anyone know what I need to do? I'll be happy with anything as long as I can have both my hard drives (60 + 60 GB) and OS work. :)

  Please help, I would urge for her, because the computer is the one I use for my school work. Feel free to ask questions about the tricks of the system. If you have an answer, please let it be simple, because I really don't want to mess up again ^_^

  Please check the details relating to the installation of RAID user's Guide.
  Usually if you use the clean Windows XP disk then you need to include the RAID drivers first.
  Without pre-installed RAID drivers HARD drive will not be recognized and you will not be able to install the OS!

• Error code 0X800F0246 when installing printer drivers.

  Original title: error code 800F0246 on the installation of update

  I'm trying to install the driver for my printer Samsung ML-1860 and get an error code 800F0246.  I also tried to install a driver for the Samsung CPL-315 and it would not install either

  Hello
   
  (1) were there any changes to the computer before the question?
  (2) what exactly happens when you try to install the CLP-315?
  (3) is the model number of the second printer you are trying to install Samsung CLP-315?
   
   
  See the methods mentioned below and check if that helps.
  
  Method 1:
  Clean boot the computer and try to install the printer drivers
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following step 7 of the above mentioned link.

  You can download drivers from the link below and check if it helps.
   
  ML-1860 monochrome Laser printer
  http://www.Samsung.com/ie/support/model/ml-1860/XEU-downloads
  
  Printer Laser Color CLP-315
  http://www.Samsung.com/us/support/owners/product/CLP-315/XAA
   
  Steps to download and install the printer driver.
  a. click on the above links and select downloads.
  b. Select the driver from the drop-down and select the universal print driver for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) in the case of Mono Laser Printer ML-1860
   
  c. Select the driver from the drop-down and select Print Driver (Driver) for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) of Printer Laser Color CLP-315.
   
  (d) download and install the driver and check if it helps.
   
  You can also download the drivers via Windows update, see the link below
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

   

  Method 2:
  You can contact Samsung support to get help by following these links:
   
  http://www.Samsung.com/ie/support/model/ml-1860/XEU
   
  http://www.Samsung.com/us/support/owners/product/CLP-315/XAA
   
  Click on the above link and click Overview and on the right side of the screen, you can find support options.
   
  Hope this information is useful.

• can not go on the internet when installing udates

  When the newist updates are installed it loads web pages up. I do a system restore before the udates were installed I did it twice in the second first time I did a system restore I could get on the internet until the updates have been installed when the computer turns off. Then, when started upward could not go on the internet.

  jaco9876,
  Before installing the updates get the latest network adapter driver.  Update the driver and then run the Windows Update and see if that corrects the problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the error to access the problem when installing QuickBooks Pro fonts

  WHY do I receive THE MESSAGE (THERE WAS a PROBLEM ACCESSING the FONTS0 WHEN I TRY to INSTALL QUICKBOOKS PRO

  Hello

  Try these steps and see if that helps.

  a. right click on the shortcut icon on the desktop of QuickBooks, and then select Properties.
  b. click on the Compatibility tab.
  c. Select run this program in compatibility mode for and select Windows XP (Service Pack 2) from the list.
  d. Select run this program as an administrator, and then click OK to save the changes.
  e. open the configuration file.

  If the problem persists, please post your question on the forums for assistance from intuit.
  http://community.Intuit.com/QuickBooks?14@@.ef91d88/6

• Install the problem when installing Creative Suite 6 Master collection?

  Is that what someone has had this problem when installing Creative suite Master Collection 6? It is said: the product, you try to install in the footsteps of a real Adobe and seems to be counterfeit. I received the product directly from Adobe. It will validate then start to install and then stop and give me the above error. Help.

  Try http://helpx.adobe.com/creative-suite/kb/genuine-verification-failure.html

• I forgot to change the IDE to AHCI in the BIOS when installing programs in Windows 8

  Just installed Windows 8 with a new HD SSD. I forgot to AHCI in the BIOS before installing all my programs. I remembered and set the BIOS to AHCI but Windows 8 will not start. I don't want to do a fresh install. I tried to play with the registry:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci

  I set the start value data to 0

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\pciide

  I set the start value data to 0

  Rebooted and set the BIOS to AHCI Windows is not loading.

  Can anyone help?

  There is a Fixit for Windows 7. It can now work with Windows 8.

  http://support.Microsoft.com/kb/922976?WA=wsignin1.0

  You can try this alternative. I don't know if it will work.

  Above all, back up everything.

  http://www.ithinkdiff.com/how-to-enable-AHCI-in-Windows-8-after-installation/

  Tom Ferguson

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

• Partitioning of the problems when installing Windows 7

  I have a HP Compaq CQ58 supplied with Windows 8. I switched to Ubuntu and I'm doing a clean install of Windows 7. Installation came at a prompt asking "Where do you want to install Windows?" and I have three partitions:

  Disk 0 Partition 1 - 94.0 MB system
  Disk 0 Partition 2-296, 4 GB primary
  Disk 0 Partition 3-1, 6 GB primary

  When you select one of them, I get "Windows cannot be installed to Partiion Dis 0 x." On the 1 (System) partition, the details are:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. The partition is a partition of EFI (ESP) system.

  On Partition 2 (primary), the details just say:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  And on the Partition (primary) 3, tell the details:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. Windows must be installed on a partition formatted in NTFS.

  Windows cannot be installed to this hard disk space. The partition is of an unknown type.

  Well, I had nothing in particular requiring a backup (it is a computer of leisure, all of our important data are on other devices), then I hit the "Format" button on all three in turn try to get the installation to run on one of them. If any OS at this point is completely erased. I need to know, now, what to do. I'm not comfortable with my computer knowledge to go and delete partitions without professional opinion. I'm not used to have more than one partition and wouldn't mind consolidating unless HP has good reasons to keep them separate.

  Hello

  There is no reason to keep these partitions and you can remove them using the disk management on the following installation disc.

  Left click a partition for highlight.

  Click the blue link "drive Options (Advanced).

  Select the option 'delete '.

  Repeat this step for each partition listed.

  Once completed, you should see only 1 entry showing that "the unallocated space on disk 0.

  Click on the button 'Next' operation of installation of Windows 7.

  Be aware that Windows 7 will also create a "System" of about 100 MB hidden partition that contains the files and start the recovery environment.

  Kind regards

  DP - K

• Failed to load the module when installing

  Hi, I recently bought a Core i7 2600 k with a card mother ASUS P8P67-M with 8 GB of ram and an Asus EN8400GS GPU. When I install ESXi 4.1, it would give "vmkctl. "HostCtlException: could not load module/usr/lib/vmware/vmkmod/vmfs3: failure. Anyone have any ideas?

  Thank you

  

  Welcome to the community.

  This error is common when no supported NETWORK card has been found.

  Check your hardware 'compatibility' on:

  http://www.VM-help.com
  http://ultimatewhitebox.com

• Satellite A300 - restart of the equipment when installing Win7

  Hello

  I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
  It s is usually spent on extraction of the files step.
  Help, please

  PS
  It s not a hard drive, I have already replace without a bit of luck

  Hello

  You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

  However, to check if the default BIOS allows you to install Windows 7
  In addition, try to set the SATA mode in compatible mode or AHCI.

• Equium A110-276: can I update the BIOS when installing Vista?

  I don't know where to post this...

  "I have a clean install of Windows Vista on my satellite A110-276. I have to update the BIOS or not? Is - mandatory/mandatory BIOS update?

  Hello

  It seems that Toshiba has released a special version of the BIOS for Windows Vista.
  If you want you can check it on the page of the Toshiba driver.

  But if your Vista runs correctly on the computer laptop with the previous version of BIOS you n don't need to update the BIOS.
  I recommend updating BIOS, if any odd operational behavior will appear.

• Error code 28 when installing printer drivers Canon

  Original title: error code 28

  Could not load the driver for the printer Canon MF 3240

  This one?
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=335&ModelId=12943

  Please ask in the forum material Win7 & drivers .
  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads

  Bruce Hagen ~ MS - MVP [Mail]

• "Error please make sure printer is connected to the computer" when installing HP Photosmart 5515.

  Original title: my HP Photosmart 5515 will be OK: print/copy/scan to memory card. BUT...

  Running Windows 7, new printer installation, I tried HP site and Instruction Book, uninstalled and Reinstalled.

  Same problem each print/copy/scan time.will memory card OK. BUT does not connect to my laptop to scan to the computer wireless or wired, it rises "year error occurred while scanning, please make sure that printer is connected to the computer.

  Hello

  Method 1:

  I suggest you run the automated FIXIT from the link below and.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I also suggest you to go through the steps mentioned in the link mentioned below and check.

  Scanning problems? Try the HP scan Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114802&cc=us&DLC=en&LC=en&product=5063608&tmp_track_link=ot_search#N97

  HP Photo smart 5510 and 6510 e - all-in - One Printer Series - a 'connection error' or "Computer no. detected" Error Message appears when trying to Scan from the printer control panel

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02917811&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=5159859&prodTypeId=18972

  See also:

  How can I get my PC to see my Photosmart printer of 5515 via my wireless network

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-do-I-get-my-PC-to-see-my-Photosmart-5515-printer-via-my/TD-p/1171265