The status of domain error detected. Administrator-display

Similar Questions

• "The parameter is incorrect" Error Message is displayed on the computer

  I'm running Windows 7 Home Pro on an Asus laptop and recently decided to add my old printer USB, HP Oficejet v40, to our network via a print server, LPR Networking USB wireless home. The Installer seems to fill correctly, and my printer appears in the list of available network printers (I alone). However, when I try to print wireless, I get one or more error messages. The first and the most persistent are: a StartDocPrinter call was not issued. Sometimes (not always) this is accompanied by another popup error: the parameter is incorrect. In each case, the document I am trying to print is no longer in effect. My USB utility Server network sometimes prints, and sometimes it is available. Running the printer troubleshooter cannot correct the problem (s) and always results in the following error: printer HP Officejet V40-P05d0443eb can be contacted via the network. If I connect the printer directly to my laptop, USB port, it prints as expected.

  The print driver is up-to-date. I tried to uninstall and reinstall the printer and print server and have also tried to reset the print server and the router, to anything will do. Any help to fix these problems is greatly appreciated!

  Original title: error: A StartDocPrinter call was not issued.

  Hello

  Thanks for posting your query in Microsoft Community.

   

  You can consult the following articles and check if they help:

  Wireless printing Center Resolution of problems
  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/Troubleshooting.html
   
  "The parameter is incorrect" Error Message is displayed on the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03283238

  For the error: "the printer cannot be contacted over the network",
  refer to suggestions provided by Meghmala responded on May 28, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/printer-cannot-be-contacted-over-the-network-error/a4318308-3D16-44D4-bac8-7fdd10a83208
   
  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• The caution icon appears on the status bar, and error on this webpage, page States and it may not work properly.

  Original title: Error on the page with the warning icon

  The caution icon appears on the status bar, and the page shows error and error on this Web page might work incorrectly and script on the page error

  Hello

  1. what operating system is installed on the computer?

  2. do you use the Internet Explorer browser to surf the internet? If so, which version?

  3. with what Web page, you receive this error message?

  4 does happen with a particular Web page or it occurs with other webpages as well?

  Follow the article mentioned below, if you use the Internet Explorer browser:

  How to fix script errors in Internet Explorer on Windows computers:

  http://support.Microsoft.com/kb/308260

• bad battery or DC power converter? the main battery (internal) (error 601) windows displays battery to

  defective battery or DC power converter?

  battery (internal) (error 601)

  Windows displays the battery to 100%

  laptop not boot battery, will start only on ac, but battery installed shows error 601

  HP eliteBook 6930

  no spare battery

  althefirst wrote:

  defective battery or DC power converter?

  battery (internal) (error 601)

  Windows displays the battery to 100%

  laptop not boot battery, will start only on ac, but battery installed shows error 601

  HP eliteBook 6930

  no spare battery

  This error is a bit confusing.  At first glance it seems to refer to the CMOS/RTC battery but actually refers to the main battery to the laptop.  Even if the computer indicates that the battery is at 100%, it would be a good idea to check that it is in working condition.  I think that it is a good first step, because although it doesn't show 100% charge, you say the laptop does not work unless it is on current alternative.  This paper addresses the issue further.

  As indicated in the document, the HP Battery Check will be performed to determine if the battery is faulty.

  To perform battery check do the following and display the result.

  1. Unplug the power cord and turn the computer off.
  2. Press on the button / stop to turn on the computer.
  3. Press the ESC key immediately seeing the HP or Compaq logo screen.
  4. The Start menu appears.
  5. Press F2 to select F2 System Diagnostics .
  6. Select battery Test in the list of diagnostic tests.
  7. Connect the power supply cable.
  8. Click Start Test Battery on the battery Test page.

  If your battery fails this test, it will need to be replaced.  To get a spare battery, you will have to contact HP Support.  If you are in the USA / Canada you can call to the 1-800-474-6836.  If you are located outside of this area, you will need to go to the HP support site and after selecting your country, search for "Customer Support" in the lower right corner to get contact information for your region.

  I hope this helps!

• Office Jet 4500 G510n printer ready but error rises to the status

  I have an Office Jet 4500 G510n and a MacBook Pro 15 2006 2 late model, worm 10.6.8

  I upgraded to an SSD HD and everything works find except the printer. I can go to the utility and the TEST PAGE prints OK.

  However, the STATUS, it reads: "error/library/Printers/hp/cups/inkjet1.driver/contents/macos/injet/failed."

  I checked the drivers and all I saw were for the Page 'extra '...

  Lost!

  Research on the HP support site, I found that under Mac OSX, they auto download updates for printing. Did not transfer my old HD to a SSD who follow these updates... they do not have. Then... I downloaded all updates (pilot) to my new SSD and the works of the HP printer!

• Open a session with the status of administrator but windows update denies - 0x8ddd0002 error

  I connect with the status of administrator, but windows update said I am not an administrator and refuse updates.

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned in the link checking if this is useful:

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/316524

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  I hope this helps.

   

• In Windows 7 RC, try to get a local domain, error ' you don't have permission to save in this location. Contact the administrator for approval. »

  I installed Windows 7 RC today and trying the route of a local domain in C:/Windows/System32/drivers/etc/hosts, but get an error when you try to save it with Notepad:

  "You don't have permission to save in this location. Contact the administrator for approval. »

  If I try to save it to my documents and then copy the file over I have another error:

  "You need give the administrator permission to copy to this folder."

  My account is the only account is already an administrator.

  How can I do this?

  See you soon.

  Right click on Notepad, and choose Run as administrator. Click on file, then open, then navigate to

  \Windows\system32\drivers\etc

  In the menu drop-down edit files text (*.txt) to all files (*. *)

  Open the hosts file and change now :-)

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/9446377a-42ab-4079-AFEC-e90a097060c0/

• by clicking on find printer displays error "The Active Directory Domain Services is currently unavailable" I am on a network home windows 8

  When I use word and the products that come with it, I get the above error message.  Then the print job does not print.  Have you tried a lot of bugs, but none have worked.  Help, please.  I'm pulling my hair out.

  Hi Ibilofsky,

  Clear printer spooler files and activate the spooler service and check if the number fixed.

  Step 1

  (a) press the Windows key + R, type "Services.msc" (without the quotation marks) in the Open box and click OK.

  (b) double click on "Printer Spooler" in the Services list.

  (c) click on stop, and then click OK.

  (d) press the Windows key + R, type %WINDIR%\system32\spool\printers in the open window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.

  (a) open services and right - click the Print Spooler service, and then click Properties.

  (b) under the general tab, next to startup type, make sure that automatic is selected.

  (c) if the service does not, under Service status, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Check the status of the issue.

  It worked perfectly.

  All installed printers came instantly. No need to reinstall the printer etc drivers they worked already well before the show. It was a spooler problem.

  Thank you.

• Error on Page - on the warning icon is displayed in the status bar

  Hi gurus,
  
  I create 2 button send on a page, IE. A and B.
  The PR
  A and B both become real and fake disabled.
  
  To the PFR
  When A is clicked, it becomes disabled, true. and B remains false disabled.
  Then I click the button B, here it gives ERROR on the PAGE on the left side of the taskbar below.
  
  Something like a JS error
  
  ERROR POP UP is: -.
  
  Problems with the Web page may prevent it to be displayed correctly or work correctly.
  In the future, you can display this message by double-clicking the warning icon is displayed in
  the status bar.
  
  
  Line: 4886
  
  Char: 5
  
  Error: Object doesnot do support this property or method.
  
  Code: 0
  
  
  
  My code:
  PR
  am.invokeMethod ("XXhandle");
  
  
  PFR
  If (pageContext.getParameter ("A")! = null)
  {
  System.out.println ("submit click 1");
  am.invokeMethod ("falseAdvtblRenFal");
  System.out.println ("submit clicked 2");
  }
  
  
  If (pageContext.getParameter ('B')! = null)
  {
  System.out.println ("B submit clicked 3"); not have here
  
  }
  
  
  AM
  Public Sub XXhandle()
  {
  System.out.println ("In XXhandle");
  OAViewObject disvo = (OAViewObject) getAllPurposePVO1 ();
  If (! disvo.isPreparedForExecution ())
  {
  disvo.executeQuery ();
  }
  Line = disvo.createRow ();
  disvo.insertRow (row);
  row.setAttribute ("AdvtblRenFal", Boolean.FALSE); Disable false to button A
  }
  
  
  
  Public Sub falseAdvtblRenFal()
  {
  
  System.out.println ("inside falseAdvtblRenFal");
  OAViewObject disvo = (OAViewObject) getAllPurposePVO1 ();
  
  Line = disvo.first ();
  
  row.setAttribute ("AdvtblRenFal", Boolean.TRUE);// disable true to button A
  
  System.out.println ("a falseAdvtblRenFal");
  }
  
  Thank you
  Christelle

  Christelle

  I tried the same code on my machine. By creating a PVO with two attribute transient (editable as always). Then set the attribute of PVO with disabled button property through SPEL. Then used your code and I am able to perform all actions without any error.
  Try to attach the SPEL to render the property if that helps!

  Also check on any other machine also. Like maybe its a problem with your computer only...

  Thank you
  AJ

• I just installed Adobe CreatePDF desktop printer, when I try to use from Word or Excel, it does not work.  The print queue Adobe says "error" in the status display.  I uninstalled and reinstalled.  Any ideas of what to do next?

  I just installed Adobe CreatePDF desktop printer on a Windows 7 PC at home.  When I try to use Word or EWxcel, it does not print.  The queue of the Adobe print device reports an "error" in the status column.

  The CreatePDF desktop printer is removed. Please visit https://forums.adobe.com/docs/DOC-5131 for more information.

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  original title: battery problem

  To all,

  When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  I unplugged the battery taken power and put it back it, that did not work,

  The battery is fully charged and when I check the battery in the control panel for the strength of the battery, the system is telling me, it is fully charged and there is nothing wrong with my battery.

  Then I ask why I get this error when I start my computer.

  Can anyone help me on how can I do to fix it.

  Thank you

  Russell Froedge

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Joined to a domain and an administrator remote after the installation of SP1, updated to 10 settings (clean install) then

  Wipe the hard disk, reformatted and did a clean install of OS7 home (fossoyées pro hoping group domain policies and etc. would not be a problem).  But they are still there. Reinstalled again.  I can't remove the files manually, give me permission. Loading guard who looks like a fake update file, but I can't delete that either.  I'm at my wits end.  I also have a problem with one of my Outlook email accounts, displaying a string of what looks like a key under my user name.  I have dealt with this for 2 months.  had my machine to two different local mechanics and nothing.  Even exchanged the motherboard and the drive.  How's it relate?  I do not even use the same key.  The only way he could do it is through my network connection. (Disabled Wifi too).

  I read something on the Panther Trojan and I do not have a file of Panther on my machine (which again, I can't delete).  I didn't even think that HOME version had this kind of remote administration and yet it moves it. Its load of 32-bit strange file and run it on a 64 bit system.  I don't know what to do from here.  I can't get a version of Windows installed which does not suck up all my processing power and crazy amounts of data transfer.  I pulled out an old HP Pav and am now loading XP on it.  At least I will be able to view and edit files it contains.  I don't think safe, even check my email on this machine. (I use my ipad for that).

  Here are the results of the queries from the command line, screenshots and event log shears.   Since I was the last reinstall at about 21:00 there are 294 Logon and created special logons.  Not to mention that I had an another windows machine and one android corrupt their hooking up to my Dungeon phone.  The worst is a 10 years ' worth of my design files holding external drive.  Sighhhhhhh...

  IM so sick of looking at this.  Im going to bed and hopefully not dreaming about it.  If someone can tell me how to stop this happening, I would SO appreciate it.  Support for Windows is a joke.

  I have run 3 different programs of Virus Scan on it, reformat the drive twice (wiped to zero once), and used three different install media (three different versions of Windows. 0 s 7 home, pro and pro OS7 OS10 (7 pro is what I was running when this began).)  Again, it is after that I paid two services of different repair to diagnose, pull the wireless network card, replace the motherboard and replace the disk.  After that I freaked out on them they began to throw the installation discs and Home keys. lol seriously, I might as well throw my money down a hole. (the key I've finally pulled the machine isn't that I've never owned?) I guess that's why I'm trying so hard to get pure installed, I already so much money in it.  I should probably just give up and load Linux.

  If I ever get my hands on this bloody trusted installer it is a dead man. Thanks in advance!

  Microsoft (R) Windows (R) operating system group policy result tool v2.0
  Copyright (C) Microsoft Corp., 1981-2001

  Created on 20/07/2016 at 23:03:12

  The RSOP data for OWNER-PC\Administrator on your PC-OWNER: Logging Mode
  ----------------------------------------------------------------

  OS configuration: Standalone Workstation
  OS version: 6.1.7601
  Site name: n/a
  Roaming profile: n/a
  Local profile: C:\Users\Administrator
  Connected over a slow link? : no

  COMPUTER SETTINGS
  ------------------

  The last time group policy was applied: 20/07/2016 to 22:31:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: 37L4247E29-32
  Domain type: Windows NT 4

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The computer belongs to the following security groups
  -------------------------------------------------------
  Required at the system level
  Everyone
  Builtin\Users
  NT AUTHORITY\SERVICE
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  BDESVC
  BITS
  CertPropSvc
  EapHost
  hkmsvc
  IKEEXT
  iphlpsvc
  LanmanServer
  MMCSS
  MSiSCSI
  RasAuto
  RasMan
  RemoteAccess
  Annex
  SCPolicySvc
  SENSE
  SessionEnv
  SharedAccess
  ShellHWDetection
  wercplsupport
  Winmgmt
  wuauserv
  LOCAL
  BUILTIN\Administrators

  USER SETTINGS
  --------------

  The last time group policy was applied: 20/07/2016 to 22:36:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: OWNER-PC
  Domain type:

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The user is part of the following security groups
  ---------------------------------------------------
  None
  Everyone
  BUILTIN\Administrators
  Builtin\Users
  NT NT\INTERACTIF
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  LOCAL
  NTLM authentication
  High mandatory level

  After you activate the hidden administrator account (which already had a defined password btw)

  C:\users\administrator>set
  ALLUSERSPROFILE = C:\programdata
  APPDATA = C:\Users\Administrator\AppData\Roaming
  CommonProgramFiles = c: files
  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
  CommonProgramW6432 = c: files
  COMPUTERNAME = OWNER-PC
  ComSpec=C:\Windows\system32\cmd.exe
  FP_NO_HOST_CHECK = NO
  HOMEDRIVE = C:
  HOMEPATH = \Users\Administrator
  LOCALAPPDATA = C:\Users\Administrator\AppData\Local
  LOGONSERVER = \\WIN-01J5F1J7NAH
  NUMBER_OF_PROCESSORS = 4
  OS = Windows_NT
  Path = c: Windows system32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32
  \WindowsPowerShell\v1.0\
  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
  PROCESSOR_ARCHITECTURE = AMD64
  PROCESSOR_IDENTIFIER = Intel64 family 6 model 23 Stepping 10, GenuineIntel
  PROCESSOR_LEVEL = 6
  PROCESSOR_REVISION = 170 a
  ProgramData = ProgramData
  ProgramFiles = c: Program Files
  ProgramFiles (x 86) = c: Program Files (x 86)
  ProgramW6432 = C:\Program Files
  PROMPT = $P$ G
  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
  PUBLIC = C:\Users\Public
  SESSION = Console
  SystemDrive = C:
  SystemRoot = C:\Windows
  TEMP = C:\Users\ADMINI~1\AppData\Local\Temp
  TMP = C:\Users\ADMINI~1\AppData\Local\Temp
  USERDOMAIN = OWNER-PC
  USERNAME = administrator
  USERPROFILE = C:\Users\Administrator
  windir = C:\Windows
  windows_tracing_flags = 3
  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• When try to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Original title: Activation of Windows 7

  Hello

  I have windows 7 Home premium dvd I bought from microsoft. When I tried to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Please help me with this.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 8DTXM - 6FQ2H-BKDY9
  The Windows Product Key hash: tyrxnn4SwD4/dXymV2RGA4cQPHY =
  Windows product ID: 00359-OEM-9801782-52192
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-BKDY900359-OEM-9801782-521928S-1-5-21-1079193163-3130481270-3640039680Dell Inc.. Vostro 3558 Dell Inc.. A01 20150209000000.000000 + 000E9BB3607018400FC04090409India Standard Time(GMT+05:30)03109

  Content Spsys.log: 0 x 80070002

  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  The following files are available for download from the Microsoft Download Center:

  For a 32-bit version of the Windows Installer update for Windows 7 for x 86 based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=150841

  or if you have a 64-bit version of Windows

  Install update for Windows 7 for x 64-based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=152411

  Source: http://support.microsoft.com/kb/971033

  Please, run again in normal mode and copy Microsoft Genuine Advantage diagnostic tool and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

• This error: failed to start the Server Instance because the integrated Weblogic domain has not been built successfully.

  Hi Experts,

  JDeveloper 11.1.1.4.0 version, Windows 7.

  I installed jdeveloper 11g Studio Edition Version 11.1.1.4.0.

  «I'm trying to start the integrated by weblogic server: start run instancei Server weblogic the next ERREURLa get, Server Instance may not start because the integrated Weblogic domain was built not log successfully.the as a result of info"D:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd ' C:\Users\aroy\AppData\Roaming\JDeveloper\system11.1.1.4.0\o.j2ee.adrs\CreateDefaultDomain.py «»

  I tried searching but could not solve this problem.

  Reinstalled Jdeveloper, formatted my system did not work. Different version of JDeveloper also gives the same error in my system.

  One thing when I go to the folder structure, I can see the default domain contains only the config folder. The rest are missing.

  Also, I have all the rights of administrator on all folders/subfolders. I can create a separate domain and run the weblogic. But I can't start the new instance of JDeveloper. I get the same error.

  Thank you

  Roy.

  Also, what OS you are using?  I had a similar problem under win8