The syntax coloring does not work on Windows high contrast Theme

Similar Questions

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• The Task Manager does not work in Windows 7

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  If the Task Manager does not start, your computer may be a virus. Make sure that you have installed on your computer updated antivirus software, scan your system with the AV software in safe mode.

• The legacy program does not work in Windows 7

  MD simple burner will not work on windows 7

  Hi macdent

  Welcome to the Microsoft Answers Forum!

  I recommend you to check if the software is compatible with Windows 7. Here is the link that helps you check the compatibility of the hardware or software with Windows 7 Windows Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode. Steps to follow:

  i. right click on the program

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make older programs run in this version of Windows

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• Show / hide the dynamic Actions does not work in Windows 7 IE10 and APEX 4.2.1

  Hello

  I have a page in the APEX 4.2.1 reactive Blue theme, where show or hide page elements based on changes to other page elements and their values, in terms of JavaScript expression.

  It's that everything works well in Chrome 31.0.1650.63 m and 25.0.1, Firefox but not Internet Explorer 10. I thought it might be linked to this solution to the problem of Ajax IE10 | Code of Jason and tried their recommendation, but appears not to have contributed.

  Help please!

  Thank you

  Alex.

  I found the problem and it was my fault. One of my dynamic actions using JavaScript expression conditions was missing quotes in $v ("P1_ITEM1"), breaking the rest of the related JavaScript code. Chrome and Firefox did not care, but IE seems to be less tolerant of mistakes like that.

  Scott, thanks anyway. It is useful to know that I have that option as well.

• Auntie ex platforms 1.5 does not work on Windows 7

  Original title: mother board interl 61 wwb. Windows xp runs identical to dual-boot

  I recently purcahase computer with window7 Home Basic OS with original interl61wwb mother board and 4i3 second-generation 2120model cpu.

  my old account package is not currently running-Auntie ex platforms 1.5 does not work on Windows 7. I need to change, or else, I would like the system to dual-boot with Windows xp on window7 home original version on other OS.
  I WANT TO USE E.G. AUNTIES AUNTIE STOPPED TO GIVE SERVICE FOR EXNEXT GENERATION.
  DUAL BOOT IS THE ONLY SOLUTION. I M SAID, THE VIRTUAL COMPUTER DOES NOT WORK WITH WINDOWS 7 HOME.
  HELP PLEASE

  Hello

  What is the exact name of the program?

   
  I suggest you to run the program in Windows XP compatibility mode.
   
  Make older programs run in this version of Windows.
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Pavilion G6 2338sl: hardware button to turn off the touchpad does not work on Windows 10

  Hello

  I have a Pavilion G6 mobile 2338sl. When I was on Windows 8.1 the touchpad worked a lot, so I've updated for Windows 10. Windows updated my drivrs to last, provided also by Synaptics (19.0.19.1). HP says the moment is upgrade from Windows to provide the driver for this laptop, as you can see on the driver support page. The touchpad works, the parameters can be set (gestures etc.), the touchpad turns off when another mouse is connected (it's ok).

  The problem is that if I use the touchpad and I want to turn off the button, it does not work and the computer reacts like a click. So I returned to the old driver and button works. But Windows Update continusly updated the driver (I disabled the option in the advanced settings, but it still update) and I come to every time.

  So I tried to reinstall Wndows freshly (not update Windows 8.1) and with the old driver works, but when she updates to 19.0.19.1, the button to turn off the work stoppage.

  I looked on the interent and someone tips to set minimum detection of palm. I tried but it still not working.

  I hope someone can help me

  Concerning

  Hello

  If you find that the old Synaptics driver works Ok, install it and then use the utility on the following link to prevent Windows 10 to automatically update again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• WUSB600N does not work on Windows 7 Ultimate - even with the drivers of the site

  Hello

  I bought the WUSB600N (Ver 2) today and thought it might work on windows 7 Ultimate (64 bit) because the drivers are available on this Web site. The accompied D does not work, because it contains only drivers for XP/Vista. However, when I install the drivers from the site (as described on http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=20873) and opened my network manager in Windows, it shows an error "an unexpected error has occurred"... very useful

  I guess that the drivers aren't good, but no other driver for this product is available, and as I know I installed the 'good '.

  Can someone help me out here please

  I installed some ralink drivers and it seems to work now

  http://www.ralinktech.com/license_us.php?n=1&p=1&t=U0wyRnpjMlYwY3k4eU1EQTVMekV4THpBNUwyUnZkMjVzYjJGa016RTROVFV6TlRReU9TNWxlR1U5UFQxSlUxOUJVRjlUVkVGZlVsUXlPRGN3WDBRdE1TNDBMamN1TUY5V1FTMHlMak11Tnk0d1gxYzNMVE11TUM0M0xqQmZVbFV0TXk0eExqTXVNRjlCVlMwekxqQXVOQzR3WHpBNU1qVXdPVjh4TGpVdU5TNHdWMUJmUm5KbFpRPT1D

  However, I don't think I want to recommend or purchase such new material

  My message to cisco: If you want to maintain your good reputation, provide the best drivers and support!