The system cannot find the file specified__' MOM. Implementation

Similar Questions

• "The system cannot find specified file", or "refers to a location that is not available" in my folder music Public

  I have a problem with several files that I can't remove. I bought a new laptop Windows 7 a few months ago, and my music library is located in an old Mac I installed iTunes and copied everywhere, but for some reason, a couple of directories has become corrupted in the process. I was able to move a couple of them from 'C:\Users\Public\Music' to 'C:\Corrupted records' so I don't have to look at, but one of them is

  refusing to move. If I try to open it, I get the message "C:\Users\Public\Music\P.O.D. refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the informaqtion could have been moved to another location. »

  If I try to get the properties, the type of file is a folder (.) that opens with Windows Shell common. Reading alone and Invisible are unchecked. It is not shared. The requested security information are either unavailable or cannot be displayed. There are no previous Versions. I tried optimizing for music and General items.

  I tried to remove it from a command line, and although he can be seen in the directory, I get an error if I try to delete or move it. I tried to delete it in Mode without failure. I tried to create another folder with the same name, and it creates a folder without end '. ", I'm able to remove, but the original is still there. I have tried uninstalling iTunes and iTunesHelper.exe cessation force.   I ran a chkdsk.  I looked in the registry. I tried to reboot in safe mode and try it. I tried to create a new account and delete from there. I tried to reset the permissions. I even deleted my entire library of music. If I try to change properties it tells me that the "system cannot find specified file."

  This issue is driving me crazy... I should be able to just go and start over, but I won't be able to copy this particular music folder. I could live without it, I suppose, but I wouldn't not to-I fear that this will happen in folders more if I can't find a solution. I could ignore it, but I am too a retention... I installed servers in a previous life, and when such things happen that we do something more deep is what concerns me in particular.

  Any suggestions? Please?

  Hi Zarebeth. I have the answer to your problem. The problem you are having is the same problem I had, it's a file name that ends with a '. '. (one point). That's THE problem, which has also caused all of your previous attempts remove this folder to fail. Windows does not allow you to create such a file, but Mac FACT (you mentioned that your music library lay on an old Mac)! Try for yourself, create a folder in Windows called "P.O.D." and Windows automatically re-writing this folder as "Painter" (note the last missing point). MAC doesn't have a problem with that, you can call your folder "P.O.D." witout any problem (but also allows you to call this 'Painter' folder (note the last missing point)). The only problem is when a folder created on a Mac device ends on a computer Windows, that happened when you copied the musicfolder of your Mac on your Windows 7 laptop. For example, I had the problem with music "C:\Users\Public\Music\M.I.A" and "C:\Users\Public\Music\T.I." after that I copied the files from my Ipod Touch (also a feature of Mac of course) for my new Windows 7 laptop to function.

  Now, I can only tell you how to remove this folder, I don't know how to recover all the data that have remained in this "indelible" folder (if any). What you can do of course, is to return to your old Mac, rewrite the "P.O.D." folder as "Painter" (note the last missing point) which will BE recognized by your computer laptop Windows 7.

  It's very simple, and you'll wonder how the sollution might actually be this simple :))

  GO to "command prompt" (start > all programs > Accessories > prompt) then in the command prompt (the small black screen with white letters), you type (in your case):

  RD/s '\\?\C:\Users\Public\Music\P.O.D.

  RD is as a function of deleting files (not for the files).

  You will then be asked if you are sure "(Y/N)" and then of course, you type 'Y' and press enter! " And like that... begone is the folder which you so frustrated! Happy days are back! : )

• System cannot find specified file hpzmsi01.exe

  Hi all

  My first post.

  I try to install the software from AIO_CDB_Net_Full_Win_WW_130_141 for my HP Office Jet 7310 all-in-one printer.  Model #SDGOB - 0305 - 02.

  I'm running Windows 7 Ultimate.

  The installation runs until I get the message "the system cannot find the file specified."  At the dialog box title "C:\User\Bob'sH... hpzmsi01.e...» "I click 'OK' and I get 'Solution for the Installation of HP Windows 7" error.  The error message is still on the screen.  If I click OK the installation will now recover and restart.

  This isn't the first time I installed my printer, but the first time for this error.  I'll have to let all over again and sign in again on this forum.

  Thanks in advance.

  Respectfully,.

  Hi Shane R.,.

  I'm sorry, but I don't have the chance to try the solution of yoiur.  Well, I'm tired of playing games.  So I made a new clean install.  I allowed the pc find the default «HP Officejet 7310 all-in-One Printer»  After checking that he was printing and scanning, etc, I downloaded the software and it now works fine.

  So is the new pc configuration.

  Thanks in advance.

  Respectfully,.

  Bob

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• MOM. Implementation - the system cannot find the file specified at startup

  original title: when that I start the computer, this message - MOM. Implementation, Version = 2.0.3463.30896, culture = neutral, PublicKeyToken = 90ba9c70f846762e, or one of its dependencies. The system cannot find the specified file. __

  So my video capabilities do not work well and the system is slower loading pages of web sites.

  Help, please

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Then:

  This error seems to indicate a driver problem ATI Catalyst

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• When you connect on Vista, get message of the system cannot find the specified file

  the above is displayed. whenever I connect. I can do everything works, that's when I hit print, save appears and the file has been converted to a tiff file.  None of the office products will be printed.  I have the office 7 wiuth Vista 32 OS.  I went throgh HP, but there seems to be a problem in office

  * original title - MOM.implementation, Version = 2.0.3182.4658, Culture = neutral, publickeytoken = 90ba9c70f84672e' or one of its depenencies.  The system cannot find the specified file *.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• XP - error: the system cannot find the specified file.

  I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

  Hello
   
  
  1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
  2. are you able to boot to the desktop now?
  
  Method 1.
  Run Disk Cleanup and disable the security software and t hen try the same installation and check.
  Want to t he article below for disk cleanup:
  http://support.Microsoft.com/kb/310312
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update, Error 8007000 b - "fsutil resource setautoreset true C:\ ' returns the message "error: the system cannot find the file specified. '. »

  Tried to do a Windows Update and received the error message
  Windows Update 8007000 b error

  I tried the solution proposed in the windows of the promp command of the Administrators account

  true fsutil resource setautoreset C:\
  
  and received the error message.

  Error: The system cannot find the specified file.

  Vista is installed on the C: drive

  What now?

  Problem disappeared.

  I downloaded two no microsoft updates and restarted my computer. Then, I downloaded the updates from microsoft that now installed successfully.

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• Error 2: The system cannot find the specified file

  Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

  Help, please
  Sam

  What version of Windows, including service pack (right click on my computer > properties)

  What past just before the problem arises?

  Click Start > run > services.msc > OK
  Scroll down to "Windows Audio"

  The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

  Search for your system (probably C :) drive
          
  audiosrv. DL (it's only one L)

  Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

  You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

  If she is not there, it should be in C:\Windows\ServicePackFiles\i386

  If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.