The T400 2768 L 35 WWAN is ready?

Similar Questions

• The device, \Device\Harddisk2\D, is not ready for access yet.

  Event Viewer has many entries of error ID 15, which States:
  The device, \Device\Harddisk2\D, is not ready for access yet.

  What does that mean?  Is this an indication of imminent drive failure?

  Hello

  ·         Did you of recent changes to the computer before the show?

  Method 1: Check that all connectors (power and IDE) should be firmly fixed. Disconnect and reconnect to check.

  Method 2: As short-term solution, try to shut down the system, turn the power off, turn on the power and restart. If the device still does not work then it is probably a problem of material, the device or card/main controller card (or possibly the cable connection) will need to be replaced. If the device seems to work then this indicates a problem of software or firmware. Do not forget that the problem can recur again unless the root causes addressed.

  Method 3: Update the latest version of the device driver (if there is one).
  Check on the Web site of the vendor for a newer driver and if it is available then load it.

  Reference: http://support.microsoft.com/kb/283658

  Method 4: Enforcement Procedure in Windows XP check disk errors

  http://support.Microsoft.com/kb/315265

  CHKDSK warning:

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• When printing with elements 9 the epson 1400 says it's not ready, but I can print a document from aol on internet

  When printing from Elements 9 the Epson 1400 says it is not ready, yet it prints a document from the internet

  triple post

• T400 2768 WWAN?

  Hello

  Can someone please confirm that there is NO WWAN device on my T400.

  From here you can see the full list of devices (output devmanmview.exe /stext 400 txt):

  http://pastebin.com/NR3Ucu3E

  See you soon,.

  -mihaman

  Do not see. The best way to confirm must take off your keyboard. The WWAN is just under the keyboard, close left Ctrl, Alt pressed.

• Lead time for the T400 Vista SP2 x 64 and hangs on reboot

  Hello

  I searched the forums, but couldn't find the same problem. It looks more like a problem with the OS.

  The problem is with T400 (description of model in the background) running Vista Ultimate x 64 SP2. I get huge delay before booting from the HARD disk (3-10 minutes). This happens just after the post, when it comes to a black silicone screen with the flashing line in the upper left corner, before the loading Vista appears. HARD drive may be the only boot device in the boot order, it is not serious.

  Another problem that happens on every reboot. Windows stops, goes to black screen and hangs there. I can't POST in this case. I can only-hard restart, after that, I get same start-up time huge, before the options of windows to Safe Mode shows, etc. due to improper closing (or automatically the normal startup).

  I ran all the tests of PC Doctor, the material is ok. I have updated to the latest version of the BIOS, HARD drive and firmware ODD and all the new drivers. All the patches to vista on lenovo download page appear to be part of SP2 now, because all say, they cannot be applied to the system.

  I don't want to run XP or Vista x 86, since I hold the RAM to be used at full capacity.

  Any help would be much appreciated.

  ------

  ThinkPad T400 6474-AU5 / base 6474-1AG: T9500, 4 GB RAM, 160 GB 7200 RPM HD, Intel X4500HD, CD-RW/DVD-RW, Intel 802.11agn wireless, Bluetooth, Modem, 1 Gb Ethernet, UltraNav, WWAN extensible, secure chip, RPF, 6 c Li-ion

  I had the same problem mentioned in the other thread you posted. I had to send mine and get the motherboard replaced.

  1 remove the hard drive from the laptop

  2. start until this stops at a few guests

  3. press on Ctrl + Alt + Delete to restart the portable computer

  If it stalls / freezes on one screen empty and does not restart then it isn't a Windows Vista problem, because the hard drive is not there, but a hardware problem which you would have to return it and get fixed.

  If it restarts right away then try to format and reinstall Vista.

• The NB100 - error message - on «WWAN» software activation

  I am using the mobile broadband 3 & receive the following message if poster every time I try to connect: -.
  "Activation of the software has made '228' unsuccessful attempts to the type of carrier"WWAN". The software will be blocked for "WWAN" connections after that '772' more futile attempts. For more information, contact your system administrator'

  I can then open a session, but of course 1000 attempts I got fades quickly.

  I was told by 3 is not a problem with their s/w or h/w?

  I'm on a Toshiba NB100 & am running Windows XP. I suspect that there is a software conflict or that I made a mistake in XP "network connections and the Internet?

  The modem works without problem on my Toshiba Satellite 3000 - X 11 laptop.

  Thank you

  Hello

  You use the 3rd party modem.
  Have you checked the modem manufacturer page if such error is already known for guys?

  To be honest I have no idea what could cause this error, but it looks like that activation of the software has failed and you need to contact the manufacturer of the software for more details.

• Portege R600: Insert the system diskette in the drive. Press any key when ready

  I just bought a new hard drive for my R600, but after placing it I get the error:
  * Insert system disk in drive. Press a key when ready.*
  When you try to boot from it.

  In the FAQ, I think this means that the HARD drive is broken or undetectable. * However, this is not the case *, it is fresh from the store and perfectly readable with a live CD. I tried to reinstall windows, and which went perfectly, its only when it's startup time this nasty error.

  What should I do? My new SSD is an OCZ Core V2.

  To install Windows, you need the SATA drivers.
  You can set the SATA to IDE mode as Akuma said but I find that it is not a good solution. In IDE mode, you will have lost a little performance and the AHCI is faster.

  If you need to download the SATA drivers. The driver, you can find on the Web from Toshiba called Storage Manager site.
  Download the drivers and press on after having started from the CD F6 to load. For that you need an external floppy drive and if you n t have one that you can build your own installation with nLite disc.
  [www.nliteos.com]

• The T400 screen brightness

  My T400 runs a lot, but I find that I have the brightness of the display mounted as high as possible. Is there another setting of brightness of the screen not to mention that the fn + illuminated keys?
  Maybe in tge to save energy? Or in the system?

  Make sure under the power Option in the control panel under your setting it is complete birgfhtness of power. I used to have this problem worse scenario is to backup and install fees which if done correctly should only take a few hours (like 5

• How to identify the T400 high Nit display

  Can someone tell me how to identify high-Nit display of T400?

  On ebay, I find some LTN141AT09, but it seems to be that there is more then one version.

  concerning

  Welcome to the forum!

  Beware of LCDS 'compatible '...

  If I were to look for the sign you are interested in, I would like to make certain that it is a piece issued by Lenovo with a FRU # 42 T 0623.

  Anything and everything else may or may not be the real deal.

  Good luck.

• Adapter for mobile broadband to the T400

  I am looking for a card mobile broadband on T400 which I can use in US as well as in the rest of the world.

  Recommendations/suggestions welcome.

  Thank you

  For HSDPA the Ericsson and the desert of Gobi 1000 are more or less similar, but in addition, the GOBI1000 supports the EVDO

• How to save the message in drafts until I'm ready to send?

  I sometimes don't get a finished message and want to save it in drafts until I'm ready to send.  My Windows Mail will automatically send the incomplete message when I open e-mail.  How can I keep a message in the drafts folder until I'm ready to send?

  Vista Windows Mail does not send a message, unless it, or a copy is in the Outbox. He can not send currents of air.
   
   

• Looking for icon of the T400 (on Win 7) battery indicator

  I just upgraded to Win 7 64 bit... and I noticed Win 7 comes with its own icon 'battery' in white, sitting on my systray.

  I remember that with my T400 on Win XP before I used for this neat battery indicator sitting on my systray icon (it was a picture of a battery translucent which has been fillded green when fully charged and becomes orange/red dark when exhausted).

  I can't find the right software on the drivers page to download this indicator of return. Anyone know where to find?

  That would be Power Manager:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70601

• What is the difference between dedicate this device to ready boost and use this device?

  Hello

  I wanted to know what are the differences between the two above. Could someone please explain?

  Hello

  Ready Boost is intended at startup to speed things up...

  You can use the DATA reader when used for Ready Boost...

• Unknow new device after the bios update and to install win 7 pro to the T400

  Hi all!

  My laptop: T400 2767-2JU. After the most recent update of the bios version (3.09) and own to install all the drivers in the Lenovo Site, I found an unknown device: Simple PCI communications controller. I don't think it's Thinkpad Modem, because, before updating the bios, the system does not have it.

  Please see my picture of capture: http://i92.photobucket.com/albums/l39/hoangnhat1613/T400-UnKnowDevice.jpg

  Someone help

  PS: Sorry for my English . Where to post the link to the image? All the drivers are installed

  I've seen it suggested that this (lists of mine such as serial Port PCI) device is Intel AMT / series on local network service.  Not useful for users and some utilities normally hides.

  Hardware ID Ven_8086 & DEV2A47

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T500-Intel-driver-missing/TD-p/102526;jsess...

• How to add the partition to the T400 (Vista 64-bit)?

  I just had my T400 yesterday uninstalled all nonsense, updated and installed all my applications.  the process took several hours.  Then, I used Acronis Disk Director 10 (boot cd) to divide the C: partition into two, so that I could move my documents on a separate partition.  The separation went well, but when I rebooted, something lenovo recovery and rescue came and supposedly repaired my partition table (haha).  Well, after that I was not able to connect to windows, even when I deleted the new partition, which I did.  I had to do a reinstall factory and I am now in the process of updating all new

  Anyone know how I can make a partition without the thing rescue and recovery lenovo panic?

  Thank you!

  Start > run > type "diskmgmt.msc" without the quotes, and then click OK.

  You shrink the 'C' drive, and then create a new partition.