The timeline in AS3 on loading of view control? The f

Similar Questions

• Can I change the values of the variables in the variables view control?

  I want to use the variables view control in Labview. I see only the values, but I can't change the values or create new Variables. Will there be a chance to do?
  I use Labview 8.6.1 and Teststand 4.1.1.

  You must activate the edit mode for the ApplicationMgr, by setting ApplicationMgr.IsEditor to true. Note that you must have at least the license of the custom editor for teststand so that it works (otherwise it will prompt the user to activate a license with these privileges).

  Hope this helps,

  -Doug

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I list the main on a SWF timeline when it was loaded in another?

  I have a swf with functions of animation custon using actionscript 3. I am referring to the main timeline with Movieclip (root) and it works fine.

  However, the swf will be loaded into another (a custom player), and when this happends, everything stops working.

  I think it's because the Movieclip (root) now reference the swf loader and not the loads more, but I can't find any information on how to fix this.

  The key would be to break with the use of references to the root.  Whether or not this will be an easy task for you in this case depends on saturated how your code is with these references.  The shortest route for you may be to replace the references to the root by parent references instead.

  It is a reason say that your code should be limited to an image in the scenario primary (in fact they are more likely to say that it should be in a class of document - separate fla files/timeline).  If you have all the code forward in the file, and no code search backward, what ios and made a reference to root, so you don't have to worry about how it is loading in another file.

• stop the main timeline in AS3

  I searched the forum and maybe to find relevant solutions, but I still don't understand. How to make simple "stop()", "play()" and check "currentFrame" on the main timeline of an AS3 class file?
  
  I have an animation of script for Flash AS2 older I'm conversion in AS3 and also import an AS3 swf into.
  
  Everything works fine, except that I had to remove the "stop()" on the main timeline (if the animation does not loop) and trying to do it from the main .as file in the document.
  
  I get an error when you try to access the "currentFrame" of the scene.
  
  HOW CAN I PUT A 'STOP' ON THE MAIN SCENARIO?
  
  - - - -
  
  

  If the banner is your document class, this means that your main timeline must have only 1 frame (because the banner extends Sprite) and this means that it is foolish to check currentFrame and it has no sense to goto any image.

  do you know what you do picking the Sprite class or do you really want banner to extend the MovieClip class?

• AS3: dynamically load images in the MC

  Hello

  Currently I have 20 separate png images in the library to make a MC. So, there are 20 MC, each holding a specific image for which it is the right size.

  I want to put in place instead and need help with, to load dynamically a different set of 20 images (that I can add to the library), each one of the MC.

  I think I would need to create 20 empty MC to contain either of these sets of 20 png every first.

  What I need help: how this script so that the 2 buttons can be used: one button would charge the first series, each image in a MC empty specific which is sized to hold (total of 20 MC), and a second button to load the second series of 20 images, each in a specific empty MC that would also be correct size. I checked the loader class, but this seems to be the external URL for images not already in the library.

  Any help, suggestions appreciated.

  saratogacoach

  I hope that you are familiar with how to add dynamically to movieclips in the library.  You do this by assigning a class name to the movieclip in the library and declare you a new instance of movieclip, a lot like you were doing it just for the MovieClip class generic.

  It can work the same way a little to add images.  Right-click on the image in the library and click Properties.  In the Panel that appears, go to the tab inside Actionscript and assign a class name.  Let's say you name UIImage.  To load it into the movieclip you just created you can use...

  var _mcImage:Bitmap = new Bitmap (new UIImage (0, 0));
  _mc. AddChild (_mcImage);

• Access to sound on the Timeline in AS3

  I have a very simple fla consisting of a picture and sound on a separate calendar. In AS3, I want to determine that the sound is full and go to another URL. I have the code to change the URL in a separate function. What I can't understand is how to get the soundComplete to work when I'm not playing sound with ActionScript. I'm sure it's something simple I'm missing and I'd appreciate any help.

  Click on file/publish/flash settings and select as3 for the version of actionscript.

• stop the timeline in AS3

  Example, I have a clip of (name of the Instance = myMovieClip) moving on stage 1 in the layer 1 and made animantion from frame 1 to frame 50. In the layer 2 frame 1. I put the script. Now I want the code in such a way that if the playhead passes on frame 10 then I need to stop it. How this could be done.

  Hello

  If this is the scenario, the solution is given below.

  You have 2 layers and a scene.

  Layer1 a movieclip "myMovieClip" and Layer 2 a Script.

  The animation is the movieclip inside and not on the timeline.

  Code:

  stage.addEventListener (Event.ENTER_FRAME, stopMovie);
  function stopMovie(evt:Event):void {}
  If {(myMovieClip.currentFrame is 15)
  myMovieClip.stop ();
  }
  }

  I hope I inderstood your request correctly.

• is it safe to use a view control of sequence to display the sequence file both for execution

  I have a Teststand UI written in Labview 2012.  It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running.  Allow me to reiterate.  When a file sequence is running, the control is connected to the execution Manager.  Otherwise, it is connected to sequenceFileView Manager.

  I begin to suspect that I have questions related to this control, when I do the following.

  1. load a movie file

  2 run Single Pass

  3. the execution ends

  4. unloading and Release sequence file

  5 load a different sequence file

  6. run single-pass

  7 Labview crashes

  Am I missing a step?

  Thank you

  Kevin

  So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control.  However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.

  And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to.  Just need a simple "press a button" and "run a test" for operators.  Everyone uses the sequence editor.

  All right.  Thanks for the comments.

  Kevin

• Images disappear after loading another view with webview

  Okay, so at the beginning I had an old bar which was signed and I put that on the playbook to see what features it had. This bar has worked exactly how it was supposed to. I got the source and I had to change something, but first I had to update the sdk because I do not have the old sdk that it was built with, built when air 2.5 was outside. Everything I've done has been 3.1 the air version and the update includes the blackberry tablet sdk. He compiled and loaded on the perfectly good playbook, but after that I click on an image which acts as a button that goes to a view with a webview inside, and return to the original view, all the images in the initial view disappeared and I can't click on any one of them.

  It's weird, I remember what happens a long time ago and it has to do with something on the change of AIR/SDK, but I just do not remember what is the cause... If anyone knows what could cause the webview make the images disappear on a reload of a DIFFERENT opinion, let me know. BTW, webview was destroyed on the previous view.

  It was a problem with webview I suppose, very unstable object implementation...

• Loading external SWF in as3 SWF Loader style?

  Hello

  I recently did the replacement of as2 as3 and am still struggling to get my head to a particular aspect. I managed to load an external swf into an empty file via the script

  Import LoadDisplayObject;

  var loader: LoadDisplayObject = new LoadDisplayObject ("button_01.swf", true);

  1. loader.addEventListener ("displayObjectLoaded", onComplete, false, 0, true);

  addChild (loader);

  function onComplete(evt:Event):void {}

  trace ("received full load");

  loader.scaleX = loader.scaleY is. 75;

  }

  ... but I'm struggling with the script to make a SWF to load into a space when one of my 3 buttons is activated...

  My page currently has three buttons (button_01, button_02 and button_03) and in a local folder three separate sovereign wealth funds with the same names that I want to load, when you press the appropriate button.

  I managed to get them to load using a tutorial... but what they charge on top of each course... far from ideal. Research on the internet I found a range of different script... goal, that I can't find anywhere that I can find the script to make it work... so why I turned here.

  Any help much appreciated... Thanks in advance.

  Simply call butt1Click (null);

• AS1/AS2 to AS3 onClipEvent (load), onClipEvent (enterFrame)

  onClipEvent (load) {}

  total = _root.getBytesTotal ();

  }

  onClipEvent (enterFrame) {}

  charge = _root.getBytesLoaded ();

  % = int(loaded/total*100);

  text = p + '% ';

  gotoAndStop (percent);

  if (load == total) {}

  _root.gotoAndPlay (2);

       }

  }

  Hi all

  I found an example of code that is written in AS1/AS2 to see if the charge is complete, if complete loading, it will go to the next section. How can I incubate it in AS3? It's my first time looking at AS1/AS2 code, especially onClipEvent (load), _root.getBytesTotal (), onClipEvent (enterFrame), _root.getBytesLoaded (),_root.gotoAndPlay (2).

  Can someone help me with this?

  Thank you

  -Zainuu

  this.addEventListener (Event.ENTER_FRAME, loading);
  function loading(e:Event):void {}
  var total: Number = this.stage.loaderInfo.bytesTotal;
  var loaded: number = this.stage.loaderInfo.bytesLoaded;
  If (total == load) {}
  Play();
  pLoader.Visible = false;
  this.removeEventListener (Event.ENTER_FRAME, loading);
  }
  }

• Together or constant load to a control at the beginning of a program

  Hello

  I would like to read the "Scan of a file" allows to load or set a control to a specific value when I press the run button to start the program.

  Once the program is running, the user can change the control to another number.

  The constant in the file read by "Scan of a file" does not change.

  For example, I would like to the first 'Double' 'Scan of a file' output for the interval of thread tension control.

  I have the "Scan of a file" set up, but when I try to connect an output of 'Scan of a file' my conrtol, it gives the error "wire connected to a tunnel of unidirected".

  Use 'Select' to do this? It is will be messy but because I have a bunch of constants I want to. Any other ideas? Or a solution to my main question?

  See you soon

  You must connect to the local variable or the value of property node, the control that you want to programmatically set the value of.

  (The message is "not channeled tunnel").

• problem in loading thumbnails Viewer

  IM using xp sp3, im having a video folder contains more number of videos in different format. I've no problems with the display of the video files in thumbnail only until last week, but now if I open the folder thumbnails are showing is not for videos, except one or two files also loading very slow thumbnails and when trying to close the file, the system for a while and an empty office block will appear without display of the icons on the desktop. After 1 minute, everything comes to normal. It happened everytime I open this folder. Please solve the problem.

  Thanks in advance...

  No guarantee... but by running the following command can help...

  Reach... Start / run...

  In the box run... type or copy/paste...

  regsvr32 shmedia.dll

  (Yes, there is a space between 2 and s)

  Press on... Come in...

  You should see a dialog box stating:
  "DllRegisterServer in successful shmedia.dll".

  Also... do a restore of the system Mode without failure for a
  time before the problem starts can be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

• AS3 URLLoader.load does not

  I have a Flash app that I use to capture an image of the webcam and save the image in a database of the server using ASP Classic. I used to use NavigateToURL. Since the recent security updates (I tested with Flash 14.0.0.145) I went to URLLoader.load. It works on my local test environment, but does not on the server on the customer site QA, otherwise said, ASP does not receive the data and the picture is not stored in the DB (I have absolutely NO ACCESS to the server from the client).

  • It is NOT between the domains. The Flash swf file is on the same server / the same domain as the page I load of.
  • Load triggers the completeHandler and I don't get any errors (but loader.data is empty, don't know what to look at to see the number of bytes sent?)
  • In the ASP page, I tried to Request.TotalBytes storage to see if I get something but it does not work (no data entry is made).

  Ideas of things to try, the solution?

  Code:

  function UploadImage(e:MouseEvent):void {
    var previewW:int = 94;
    var previewH:int = 118;
  
    var CropRectX:int = CropRect.x + 83; 
    var CropRectY:int = CropRect.y + 28.5; 
  
    //create a bitmap the size of the crop box
    var croppedBD:BitmapData = new BitmapData(CropRectCurrWidth, CropRectCurrHeight, false, 0x0000CC44);
    //create a rectangle relative to the cropbox in the video pane
    var rect:Rectangle = new Rectangle(CropRectX, CropRectY, CropRectCurrWidth, CropRectCurrHeight);
  
    var pt:Point = new Point(0,0);
    //copy the pixels from the crop area to the new bitmapData object
    croppedBD.copyPixels(cameraCaptureBD, rect, pt);
  
  
    var jpgEncoder:JPGEncoder = new JPGEncoder(100); // argument is the quality parameter
  
    var jpgStream:ByteArray = jpgEncoder.encode(croppedBD);
  
    //source: http://stackoverflow.com/questions/597947/how-can-i-send-a-bytearray-from-flash-and-some-form-data-to-php
    var loader:URLLoader = new URLLoader();
    configureListeners(loader);
    var header:URLRequestHeader = new URLRequestHeader("Content-type", "application/octet-stream");
    var request:URLRequest = new URLRequest(SaveURL);  //value: "SavePhoto.asp"
    request.requestHeaders.push(header);
    request.method = URLRequestMethod.POST;
    request.data = jpgStream;
  
    try 
    {
    loader.load(request);
  
  
    try 
    {
    navigateToURL(new URLRequest(DoneURL), "_top");  //DoneURL = "PrintPassesFrame.asp#" & [passID Num]
  
  
    } catch (error:Error) 
    {
    msg.text = msg.text + error.message;
    }
  
    } catch (error:Error) 
    {
    msg.text = msg.text + error.message;
    }
  
           function configureListeners(dispatcher:IEventDispatcher):void {
              dispatcher.addEventListener(Event.COMPLETE, completeHandler);
              dispatcher.addEventListener(Event.OPEN, openHandler);
              dispatcher.addEventListener(ProgressEvent.PROGRESS, progressHandler);
              dispatcher.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
              dispatcher.addEventListener(HTTPStatusEvent.HTTP_STATUS, httpStatusHandler);
              dispatcher.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
          }
  
  
           function completeHandler(event:Event):void {
              var loader:URLLoader = URLLoader(event.target);
    msg.text = msg.text + "completeHandler: " + loader.data;
      
              var vars:URLVariables = new URLVariables(loader.data);
    msg.text = msg.text + "The answer is " + vars.answer;
  
          }
  
  
           function openHandler(event:Event):void {
    msg.text = msg.text + "openHandler: " + event;
          }
  
  
           function progressHandler(event:ProgressEvent):void {
              trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
    msg.text = msg.text + "progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal;
          }
  
  
           function securityErrorHandler(event:SecurityErrorEvent):void {
    msg.text = msg.text + "securityErrorHandler: " + event;
          }
  
  
           function httpStatusHandler(event:HTTPStatusEvent):void {
    msg.text = msg.text + "httpStatusHandler: " + event;
          }
  
  
           function ioErrorHandler(event:IOErrorEvent):void {
    msg.text = msg.text + "ioErrorHandler: " + event;
          }
  }
  

  I can't help you with that.

  use a network Analyzer to see what is happening.