the uefi error driver

Similar Questions

• Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Description of the problem:

  Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Steps to recreate:

  UEFI:

  1. Start the PC in diagnosis system UEFI (F2 at the STATION)
  2. Pane controls
  3. Optical drive
  4. Sequential control
  5. Error: Optical drive not installed.

  8.1 Windows (x 64):

  1. Run Device Manager
  2. Error: No CD/DVD Drives section.
  3. Search for new hardware changes nothing.

  Relevant system specs:

  Mobile: HP Pavilion 15-n023sa (construction of vanilla)

  Optical drive: HP DVDRAM gu70n

  Steps already taken to solve:

  • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
  • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
  • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
  • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
  • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
  • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

  Notes:

  The DVD player is NOT appear in Device Manager, OR in this PC.

  The DVD drive is NOT detected by diagnostics system UEFI.

  There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

  The DVD player itself, works and has been verified on a different machine.

  The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.

• Satellite L850 - error message after installing the Realtek Audio driver

  Hi guys.
  I have a Toshiba Satelite L850 PSKG8A-07E001.

  I've upgraded to 8.1 Windows 64 bit

  Toshiba Service Station software advised to update my sound driver 6.0.1.6794 to 6.0.1.7023.

  It says to uninstall the driver installed before you install the new driver.

  I uninstalled 6.0.1.6794. Then I installed 6.0.1.7023 and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1408.1410* BT_OTHER *@Windows (9200)

  Then I tried to install the old one back and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1380.1382* BT_OTHER *@Windows (9200)

  Now the original driver was designed for Windows 8. I am now running Windows 8.1.
  The new driver does not work. What should I do?

  I have loged on Toshiba's web page for this laptop downloads. The 6.0.1.7023 driver does not exist.
  Where to find gas station?

  ZEFS.

  > Where to find gas station?
  Good question. My question is: why change something if not necessary?
  In any case, have you tried to remove this driver and install an old?

• reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again.

  reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.

  Unplug your backup disk, restart, and try again.

• Tecra 9100: After the CD/DVD drive upgrade IDE #1 error apears

  Hello!

  I'm a happy user of Toshiba laptops, and I like my Tecra is even older. My setup is a PIVm 2.0 Ghz and a few days, I changed the HARD drive. This isn't THE PROBLEM.

  Now, I have a 80 GB Seagate HDD and works very well. Days ago, I bought a DVD - RW, H - L space (Hitachi-LG) GWA-4082N, origin of another towing specifications.

  When I boot the IDE #1 ERROR message is displayed. In windows works fine, recognized as the secondary Slave PIO mode only. I am integrating then, I searcehd the web and found solutions.

  I've read on C - SALT and reversed the master/slave issue. I downloaded a firmware for Toshiba, same version for my DVD but nothing. In my opinion, is for Toshiba, but not for this model. So I tried the solution of jumper pins 45 & 47. 47 pins Cable sync/select and 45 is identical to 48 GND.

  The solution is good half. I started the laptop and does not work, no more ERROR IDE. In windows is now secondary master UDMA Mode. Works very well...

  THE PROBLEM: it's that I turn off the laptop, pick up the DVD, battery and Commander edge and when I reconected all back, the #1 ERROR IDE is sown again :(((.) Therefore, works, but sometimes it is not. What is the problem? Even with the 45 & 47 pins the message. I have readit pins 35, 36 is something CSEL0, CSEL1...

  I do more short films? Or where I can find a good firmware for my drive or the software to mass the firmware...

  Please read this post and I hope you can help me!

  Hello

  As you already know not all ODD is compatible with a laptop because masters /slave and c - salt settings.
  These parameters are controlled by a firmware and most often but not always these firmware located on sites of car manufacturing.

  I don't think you'll find this firmware on the Toshiba site. It s recommend buying the good player but don't not to Flash the firmware.

  Anyway, I also found the statement on the connection of the PIN 45 and 47 together.
  This is a solution in time and not recommended because it will damage the other pins.

• Satellite A210-1BX - error based on the CD/DVD drive

  Hello

  I have a problem with my DVD writer! I use Nero and if I burn MP3 CD or DVD .avi files happens whenever an error based on the drive. No detail!
  But on the CD are the opder of 1/2 3/4 data!
  If I insert an .mp3 CD Windows Vista said, the CD is empty! Vista is already NEW!

  Can someone help me? Or I have to contact Toshiba, I guarantee!

  Thank you

  Hello!

  Have you checked the site factory of Nero for an update? Maybe it s just a software problem that the burning procedure fails.
  In addition, you can try another burning program. A few days ago, I tested CD BurnerXP and I was very surprised! It s a freeware program and it also contains a large number of functions that it s worth a try! ;)

  Here in the forum I noticed that the dismantling of the upper and lower filters can often solve problems with the CD/DVD drive to check of workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Satellite Pro A10: IDE #1 error - drive doesn't appear unless the CD is inserted

  Hello

  I've been recently wearing on my bed watching a DVD when I fell asleep with the laptop sitting next me on my bed. During the night, however I moved and he accidentally knocked on the side of my bed.
  The next day when I booted up the loading it said IDE #1 error since then I understand it is a mistake to CD/DVD drive, the device works very well, starts ok (except the IDE error) and I can use it as usual except that there is no DVD drive in 'My computer', which is a bit of a pain when I want to watch a movie/play a game or install something.

  The drive itself is completely insensitive, when I press the button to eject the tray, it doesn't do a thing.
  I decided to try to remove and put back the drive to see if it was struck just loose when he fell of the bed as he fell only in short way (approximately down to 18 ".)

  I removed all the covers on the bottom of the laptop and checked that all was in place correctly and to try to understand how to remove the drive but would not do too adventurous as to worsen the situation, the only thing I have done is to remove the CPU fan and remove a few stuffed animals and remove the HARD drive and glanced to make sure it was not damaged in any place) It wasn't) and then replaced and replace all covers.

  When I rebooted the system, it started fine as usual, and the player react when I press the eject button, but the DVD player (sometimes) will now appear in 'My computer', but only when I insert something (be it a DVD/game/program), then it displays the error message an error of e/s on the device there.

  Any help of you all would be a great help, I thought just remove the drive and replacing it with a new one as a DVD RW one but I do not know how, I would be very grateful for advice and guidance you could provide.

  Thank you very much
  Michael

  Hi Michael,

  It is possible that the relocation of your optical drive may be necessary to refer it to the full. Unfortunately on the A10, it will be dismantled in order to achieve its screws located under the keyboard.

  Please see the following link for the complete disassembly instructions. The DVD player is covered in step 13. http://www.irisvista.com/tech/laptops/ToshibaA15/SatelliteA15_laptop_disassembly_1.htm

  concerning

• Satellite C50 - B with Win 8.1 - PXE error is displayed using the UEFI boot mode

  I have a laptop of C50 - b under Win 8.1 and recently needed to boot from a USB stick so finally found the way to do it (missing the start of the first bios menu) and managed to do.

  My problem is same when I returned in the uefi and set the boot order local drive, cd, network, he asks every time that I want to start PXE IP4, IP6 then IP4 and IP6 again. I also disabled secure boot

  I think that a value is missing, when I went to the BIOS and return to the start of IEFU option, but where is the laptop get the setting to tell him to network/PXE boot when the bottom of the list and the wake we LAN is disabled.

  Exactly, secure boot must be enabled in order to boot from the internal HARD disk where the 8.1 for Windows has been installed.

  If you want to boot from external sources (IE USB flash memory stick) you will need to disable secure boot.

• Error 19 CD/DVD on the Satellite L drive

  Hello everyone, sorry new to this forum and are still having problems with getting the DVD ROM Drive to work, not sure whether it is due to the installation of new programs such as iTunes latest version, or due to other factors, even bought a new external DVD drive, and it doesn't always, with the error 19 code.

  Thank you, please help.
  Sincerely
  Ricky Phillips

  See this Microsoft Knowledge base article:
  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  https://support.Microsoft.com/en-us/KB/314060

  To resolve the problem, remove the filters top and bottom of the registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• a digital game gives error driver and closes to the main screen

  When I play it crashes

  It says digital error driver when im playing a game and there's a lot that happens in the game wise grafich it freezes it goes back to the start screen saver, but it is reinforced by 500% the Start button is large enough. I restart the any then it goes back to normal. What can I do please help me thank you

  There are many reasons why a PC "behaves" in this way.

  These annoying 'glitches' can be caused by an overloaded hard drive, CPU overworked, Malware, 2 AV, useless data, browser addons, or you can have unnecessary programs running in the background, etc...

  For you to try - troubleshooting steps
  
  * If you are overclocking STOP.

  * Make sure that all the intake/exhaust vents are clean as well as fans.
  Download some software temp monitoring for cpu, gpu.

  * Event Viewer.
  Type eventvwr in the search and go into windows journal > application tab.
  Search for errors. Errors have red in the left column.

  Look for errors that say crash app, app crash, or everything about the CURRENT problem.
  When you find either take them a screenshot of them and download about us, or note the ID codes and event source and look for them in Google.

• What does the message "Error Invalid Drive / / E ' means. It happens whenever I am trying to install a program

  I'm tinstall Imesh I downloaded direcrtly frm the imesh website (without third party involved), and it uses the installation wizard for my, so once I open the exe file. drop this idwnloaded of imesh, it begins to extract the files using the WIZARD AND THEN A MESSAQGE BOX POP UP BEARING M, E of INSTALL THE PROGRAM AND THE MESSAGE SAYS INVALID DRIVE E.  I don't HAVE A DRIVE E, so IS IT some THING MY MICRSFT WINDOWS IS TELLING ME or IS IT SOMETHING I MESH IS LOOKING FOR? do not REALLY UNDERSTAND THE error CODE, please someone HELP me WITH WHAT YOU KNOW ABOUT it?  Thank YU IN PROGRESS

  Hello
  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • What were the changes made before the show?
  • What is the full error message that you receive?

  I recommend the clean boot and try to install in clean boot state.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I get the message error 1327.invalid drive: M:------tries to install a nuance product

  I try to install dragon naturally speaking and I get the message, Error 1327.invalid drive: M:------.

  How can I fix it

  Hello

  You can try these:

  a. log on as an administrator or as a member of the Administrators group.

  b. Click Start, click Control Panel and then click on performance and Maintenance.

  c. click on Administrative Tools, double-click computer management and then click Disk Management in the left pane.

  d. right-click on the CD ROM drive and click change drive letter and paths.

  e. click the button modify and change the drive to K and then click Ok.

  f. click Yes to confirm.

  g. install Dragon Naturally speaking

  See also: http://nuance.custhelp.com/app/answers/detail/a_id/5720

• Error 1721 that try to uninstall the third-party driver.

  Original title: error 1721 uninstall windows xp.

  When the UN-install a pilot third. I get an error 1721, to paraphrase: lack of control dphost.

  Hi JoeParrott,

  1. are you able to install or uninstall other software?

  2. What is the full error message that you receive?

  3. which driver you uninstall?

  You can follow this link & check if the problem persists:

  1721 error may appear when you try to remove programs by using Add / Remove programs in Windows XP

  Hope the helps of information.