The unit is plugged into a port not Ready Boost USB support requires USB 2.0 or higher on Windows 7.

Similar Questions

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• Problem installing drive USB Flash to use as RAM in Windows Vista, the device is plugged into an unsupported interface"

  Im trying to use a new 4G Verbatim USB flash as RAM drive. The USB 2.0 flash drive, micro size so I can leave it plugged dedicated solely to that purpose.  When I go to 'Properties' and I open the reading push tab I get "the device is plugged into an unsupported interface ' it is plugged into the USB 2.0 port I used before.»   When I plug the USB in an another store bought (more long and 8 GB) I click on the Ready Boost tab and I get the options use as RAM. This one is too long to use.

  Hello

  You can view the information of the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-memory-in-your-storage-device-to-speed-up-your-computer

  Note: a flash drive may seem meet these requirements, but Windows Vista can still detect it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.

  Hope the information is useful.

• How to get a popup when the device is plugged into the audio input jack?

  Original title - card Audio HELP

  I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.

  Hello

  This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.

  Method 1:
  As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.

  Enable auto-popup
  a. press the Windows key + X, choose Control Panel, select hardware and audio.
  b. scroll and select Realtek HD Audio Manager.
  c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
  d. click Activate dialog popup automatically when the unit is plugged in.
  e. click OK twice.

  f. now, restart the computer and check the issue.

  Method 2:
  If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.

  (a) right click on the volume icon in the system tray and then click on "recording devices".

  (b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".

  (c) right click on the headset and then click on 'Activate'.

  (d) (d) mettre put out the microphone, then choose "set as default device".

  (e) click apply and Ok.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I have a wireless adapter plugged into a port USB lock the computer.

  I have a plugged into a USB wireless adapter.

  I suddenly started bad connection to the router and my computer XP crashes.  The only way out is to do a hard reboot powering. When she returns to the top I'm reconnected but some or all of my cookies are undervalued.

  I have Win XP with Service pack 3 and it is kept up-to-date.

  I have a good anti-virus and firewall, and just in case, uninstalled and installed a different security package to make sure that wasn't it.

  The wireless USB adapter is a linksys.

  I've uninstalled and reinstalled the software for the Linksys and I reinstalled using the internet XP system so the Linksys software is not installed.

  The problem seems to be stabilized after I uninstalled the adapter and re-installed without the Linksys software, just the drivers.

  Problem solved, thanks for the help.

• Internal computer speakers will not work unless the headset is plugged into the laptop - Windows 7 - TOSHIBA

  If the title pretty much sums up it.  Speakers of my laptop won't work if my headset (or other external speaker) is plugged into the jack Socket 3.5 mm on the front of the laptop.  This is a new feature for Windows 7.  Long story short... the helmet and work of laptop speakers when the two are connected, or work with the unplugged helmet.  Thanks for the help!

  Control Panel of Goto-> Sound-> reading tab. Right-click on the speakers and select default Setas.

  If it didn't he try to go to-> troubleshooting Control Panel and select troubleshoot audio playback. Follow the prompts.

  Hope that helps.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• No sound when the headset is plugged into the audio input jack

  When I plugged headphones into the audio jack, there is no sound.  The noise comes from the internal speakers.  I just installed System Mechanic and ran a system of analysis.  I don't know if the registry has been changed or what.  It is not a problem with the headphones; I tried another helmet and have the same problem.  The phone detects the headset, an icon in the Notifications area saying that a device has been connected.

  Inspiron 15 series 3543

  Realtek HD Audio Device

  Hello. See if it will work when you switch the driver Realtel native audio driver in Windows.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.

  [To return to the Realtek driver, do it again but reverse steps 2-7 names].

• Connector MagSafe 2 (the part that plugs into the computer) is getting very hot.

  Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?

  Hello...

  Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support

• How to manage the battery when the AC is plugged into Satellite?

  Hello

  I just purchased Toshiba laptop first and want to get the best of the life of the battery, like that on my last laptop is now fuck.

  My question is: if I have to run the laptop almost always from the power supply, is it possible or desirable actually remove the battery all together way to do not subject the battery to repeated loading and unloading cycles.

  Thanks in advance.

  Hello

  I also recommend to remove the battery from the laptop, if you use Notepad for most with the AC adapter.
  You should also 3 - 4 times charge and discharge the battery completely.
  This is necessary because the batteries maintain a memory effect.

  You said it s your first laptop from Toshiba. So I think you should take a look in the user manual that must be installed on the device.
  In my manual, I found several interesting information about the handling of the battery.
  So it could be interesting for you, too.

• After you download the camera raw plug, Nikon D800 files not recognized. How can I fix this please?

  I just had a new hard drive in my MacBook Pro and had to reinstall Photoshop CS4. Despite the latest Camera Raw plugin download Photoshop does not recognize my raw files from my Nikon D 800

  That is right. The D800 Nikon NEF RAW requires ACR 6.7 or higher and you must be at least CS5 to use ACR 6.7.  You must download convert DNG 8.6 and create DNG files for NEF files using CS4. Camera Raw plugin | Compatible cameras

• is it safe to keep the power adapter plugged into laptop all the time?

  I was constantly using a laptop Pavilion DV6-1230 we 5 years almost always with the power adapter is plugged in. I replaced the battery once. I was told yesterday that this isn't a good idea, because it can lead to a shorter battery hardware and life issues. We buy a new computer and want to know what is the recommended method for the use of current alternative with a laptop. Is always connected OK? Or we stop the computer at the end of the day? The power plug must be removed from the plug?  Appreciate the suggestions and recommendations on best practices in this case.

  Hello:

  It is not a good idea to leave the power cable connected with the battery in the PC.

  You should disconnect the power supply at least once a month even if you move the laptop, run Notepad as needed and let the battery drain down until you get the low battery warning.

  Then load it up.

  Here is a useful guide of HP to prolong the battery life...

  http://support.HP.com/us-en/document/c01297640

• Other functions once the Tablet is plugged into the docking station

  The title explains pretty much everything that. I'd love to affect the application of IR remote by default once I put my tablet in my docking station.
  Because now I can only select the clock... that makes no sense in my opinion cuz u already have a clock on the lower right corner and the show of dia which I don't use.

  Since my docking station is on my coffee table soft which should start is the IR remote so I can turn instantly on my TV etc.

  Is it possible that I can do this?

  Thanks in advance.
  -Chris

  Hello Chris,
  Thank you for your continuous input on the Sony Tablet S.
  Now when it is not anchored the clock, Chumby or Gallery is proposed as the program by default when it is docked.
  We will pass your suggestion of a user default custom selected program when it is docked.

• Get the battery signal plugged in but does not load from the battery replacement

  Original title: Battery Charge.

  I recently changed the battery in my Dell Windows Vista laptop, but now the saysthe icon power battery is connected, do not load. The computer not recopgnise not the charger. Help please.

  Hi Tom,

  I suggest you to follow the steps from the link and check if it helps.

  AC adapter not power or charge the battery

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, contact Dell support and check if that helps.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&CS=19&l=en&s=DHS& ~ CK = mn

• I get the error code 47 asks me to unplug the unit, but I hae no device not connected

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi lisabuzz,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can restart the computer and try running the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why the free trial of creative cloud will not download on my laptop? I even upgraded my OS from Windows 7 to Windows 10.

  I have some difficulty to download the free trial of creative cloud on my laptop.

  Please take a look at the suggestions here: Troubleshooting download and install questions

  You can also try the steps listed in "unable to install". Creative Cloud Desktop to reinstall the creative Cloud Desktop application

  I hope this will solve your problem, but if not, please let us know.

  Guinot