The upgrade and the amount of power supply is recommended

Similar Questions

• Equium A200-1VO - what could be done to improve the situation of power supply?

  I recently bought an Equium A200 1VO as one second laptop - my other (an Aspire) is excellent, but a bit heavy in the basket to autour. Anyway, it seemed fabulous value and has worked very well so far - but I just discovered a catch today, the low battery life. I understand that this gap is shared with most of the other laptops of a comparable weight.

  In any case, I wonder what could possibly be done about (I often use my laptop while on the move, in locations without power outlet available, and less than 1 hour of power is very restrictive (I know powersave and others)-especially compared to my other laptop which is about 3 hours on battery)?

  Is there a portable power charger (the type with which you can load to the top of their rechargeable batteries on the sector, then take them and be able to charge mobile phones, iPods, etc. several times without needing an external power supply), as the Proporta one, who could charge a laptop as well (well, this laptop)? And how about the 9 cell Li-ion battery that sell Toshiba (or for that matter, one 6 cells)?

  How long will pretty much those give me? Are there other types of batteries that can be purchased for an extra life?

  Any suggestions on how I could get more autonomy would be most appreciated.

  Hi guys

  > what could be done to improve the situation of power supply
  You could buy a stronger battery which delivers more power for a long time
  You should take a look at the value of mA; more better ;)

  Also please don t forget that the Vista operating system needs more power as an early OS like XP.
  Vista needs more power because it wastes more computing resources.
  I read that a same notebook would run 2 times longer on battery with preinstalled W2K or XP.

• How to control the TTi QL564P Power Supply with USB connection?

  Hello

  When I connect the TTi QL564P power supply via the USB port I see not on MAX (peripherals and interfaces) the virtual serial connection. With GPIB, everything works great!

  I already downloaded the latest drivers on the site of the IFG.

  And I created a simple VI like this:

  OPEN--> VISA VISA WRITE ('V1?") --> DELAY (0.1 s)--> READING of VISA--> VISA CLOSE

  (works via GPIB, does not work via USB)

  VISA OPEN I have the name of resource VISA only the LPT1 and COM1 ports available... so where is the USB port (this virtual serial port, case)?

  VISA GPIB resource name is the ALIAS that I set on MAX...

  Thanks for the help

  OK, the solution was... on the front panel of the power supply, I replace the USB bus (I had default GPIB )

• How to apply the patch to power supply in an environment of dataguard

  I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

  Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

  In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

  To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

  1 reporter on the primary to the standby log shipping.

  2 cancel the MRP on the standby database.

  3. apply the patch of power supply on the standby server. -See the Readme for instructions.

  4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

  5. do not run any script correction on the standby database.

  6. apply the patch of power supply on the principal server.

  7. make sure that your primary database and the listener on the primary server is running.

  8 turn on the primary to the standby log shipping.

  9 start the MRP on the standby database.

  10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

  Please refer to this

  How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

  Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

  HTH

  -Jonathan Rolland

• Take in charge of the common Nighthawk of the X 8 power supply 240V (USA model)?

  Take in charge of the common Nighthawk of the X 8 power supply 240V (USA model)?

  It should work perfectly.

  We have a job in a remote desktop using 240V.

• (Redirected) upgrade my studio 9100 with the new graphics card and a more powerful power supply

  I have a studio 9100 with 525 usual w PSU. I need a processor amd or NVidia card and MI those watching amd r9 x 280 and 780 NVidia gtx need system in order to get a 750 w power supply. should I buy the card and the power supply through dell, or somewhere else?

  Hi michaelwilson73,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Upgrade of the block of power SUPPLY Dell Inspiron 3847

  wanted to upgrade my power supply 300 to something stronger, like the 450 Watt unit, that I have left over my old computer died. I tried to install it and all good, but the computer refused to power for more than a second, after reading up on top of some documents, I have seen many say the connector 24 pin is wired differently from the standard ATX PSUS. I need to get a power supply unit specific to Dell from a higher power to make this work?

  Hello

  For this model Dell factory only a power supply 300 w, so even if you want to buy a Dell specific, there is no parts for this model that works.

  Concerning

• Need advice on the video card / power supply upgrade

  OK, first of all I am a novice to PC. But I have a HP pavilion a6600f. I wan to be able to play games like Battlefield BC2 but graphics integrated card wont cut it. I checked some info and found what motherboard I have. Its a FOXCONN Napa HP P/N. There is a link to the Board of Directors in case it might help you to answer my question. http://www.cnsunnyit.com/products/HP-motherboard-KJ383-69002_78.html

  This motherboard is a card like a GeForce 7800 GT or ATI X 1900? These cards are what is suggested as a Minimum for this game. Also maps would require me to get a 400W power supply. The power supply can be changed as well? All the answers you may have would be great. Also remember that I know very little in terms of pc in order to keep its simple for a simpleton like me. Thank you!

  Hi 223fmj,

  You came to the right place.

  Yes, you can update your graphics card. More than all that depends on ports inside your PC.  Depending on your motherboard (HP) card , you can install PCI Express x 16 graphics cards.

  Here is a link to instructions on the adding/replacing a video card in your PC:

  http://support.HP.com/us-en/document/c01039210

  Here is a link to how to replace your power supply (with video):

  http://support.HP.com/us-en/document/c01356113

  And here is a link to the page for your PC that received instructions from replacement/upgrade of the other parts on your PC:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=24311&tmp_task=useCategory&LC=en&DLC=en&cc=us&lang=en&product=3794742

  Let us know how it goes.

• The Portege 7020CT power supply works with the dock?

  Hello

  I have a Toshiba Portege 7020CT (I know its old)
  I would buy a Toshiba PA3007E-1DST on eBay!
  In the description of sellers on eBay, it is written that a power supply is not included!
  So he lies to be included power supply? Or am I ment to use my laptop Portege of power?

  All responses are greatly appreciated!

  Thank you
  Nick

  Eh, it's really amazing that someone still use this old machine Portege. I hope it works perfectly.
  If I m remembering well at the back of this port replicator is the DC power connector, so you should be able to use the AC for your Portege power cable and connect it to the port replicator.

  The connector must be the same.

• Bit 4 scripts to get the status of Power Supply

  Hi all

  Uses script xml ILO via cpqlocfg.exe and hponcfg.exe tools to retrieve state information to a server running the ILO 4.

  If I use the web interface, I can get information on the blocks of power and their status of redundancy as shown below - but I can't seem to get this information by using the scripting system. No one knows how to do?

  Thank you

  DAZ

  

  I found it!  In case anyone is wondering, a lot of information on the server is available by querying with the ILO "GET_EMBEDDED_HEALTH" xml tag

  This refers, buried way down in the results, information on power supply (section POWER_SUPPLIES).

  Although he does not seem to ask some information about power supplies, it works!

• Where the Manager of power supply for Thinkpad E440 8.1 on windows

  Hello, is there any manager of power for thinkpad E440 8.1 on windows, I have already installed the driver for power management since the lenovo support site, but I think I need to install the power manager. is it good?

  If so, are there no power manager for thinkpad E440 8.1 so far on windows?

  so, how can I manage the threshold for the load?

  Good day and welcome to the community.

  ThinkVantage Power Manager has not been supported since Win7. It is reported in the community members apparently makes it work, but it is not sanctioned. There are also discussions on loading of the thresholds through registry changes. Please be careful if you choose to pursue it.

  Kind regards.

• Replacement battery - set the Option of power supply for Dell Inspiron 1501

  Bought a spare battery - instructions are: right click on screen and select property--> screensaver--> power--> use--> laptop power scheme. I can't find this path. Help! _

  Hello

  Since you have replaced the Dell battery and faced with the question, you can contact Dell support for further assistance:

  Dell support

  Help your battery live longer.

  Dell Inspiron 1501

• Want to Phoenix 810-330qe: upgrade, update necessary graphics card power supply?

  I'm a Phoenix 810 - 330qe, currently equipped with the stock Nividia GTX 745. I bought a graphics card GTX 970 upgrade for better gameplay and use of possible VR helmet. I have not yet installed, but wonder if my power supply must be upgraded to handle it all. If so, will what power take?

  The new card is spec'd to draw 145W and recommend a power of 500W. The 745 GTX is spec'd respectively 55W and 300W. The current stock PSU is rated at 500W, but do not know if that pushes its limit. The only other setting I had installed an SSD alongside that of stock.

  Help suggestions, thank you.

  I would upgrade the PSU, considering that you've also added an SSD.

  Take a look at the Corsair Builder supply.

• HPZ620Workstation and Evga Titan SCBlack POWER SUPPLY PROBLEM Edition

  Hello world

  I bought (Evga Titan SC Black Edition), but I have a problem with my power supply hpz620

  http://www.plugloadsolutions.com/psu_reports/HP_S10-800P1A_ECOS%202609_800W_Report.PDF

  I have two xeon processors (2 * 135W) and my question is the graphics card has enough power to do with the rest?

  Second problem is the molex cable I have only one. What is the best solution for me?

  Edition of black titan sc EVGA specification

  Performance

  NVIDIA GTX TITAN BLACK

  Hearts CUDA 2880

  967 MHz Base clock

  Boost 1072 MHz clock

  Memory

  6144 MB, 384-bit GDDR5

  7000 MHz (in force)

  336 Gbps of bandwidth

  Hello:

  You can also ask your question on the HP Business Support Forum - z section of workstations.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U4CnZ-lOW9I

• After say - and reconnecting battery CMOS, power supply T400s has stopped working

  Hi all

  A few days ago, I had to say and then plug back the CMOS battery. After putting my T400s back together, the power supply in power did not work more (the computer is plugged in and power cable works fine with other computers, but it will not provide power to the T400s). Cannot charge the battery either!

  A I unplug/break something in my quest for reset CMOS? There are simple things that I could try to get it working again?

  Thank you very much

  K

  It doesn't have to be plugged into the power problem, but a discharge of static electricity isolated were able, then you could also try to reset the bios of the laptop again by removing the cmos battery.

  Most likely, you've killed one of the power circuit element when you tried to remove the cmos battery without first statically discharging yourself.