VMware Workstation 11 crashes after installing VMware tools

Similar Questions

• Firefox crashes after installing 29,0

  People,
  I installed 29,0 early Saturday morning (10/05/14) before the 29.0.1 patch has been published. Even after 29.0.1. installed himself, he continued to be planted after 1-2 minutes. I couldn't even keep it long enough to generate reports of crash and never had the crash report dialog box.
  
  I downloaded and installed 28.0, but nothing has changed.
  
  Today, I watched in the Mangler task to see if something came out. I open the Services tab and found that nearly half services for Firefox was "arrested." Being desperate, I decided to try to restart some services and on the top 10. I started to receive messages one by one that said that a service could not be restarted because of bad software from a facility (no surprise).
  
  I gave up and tried to restart Firefox again. This time, he stayed up! So, I tried to find the grave down for 5/10. There is NOT! Apparently, the program did not stay up long enough to generate and save a report of crash in the usual way.
  
  But after trying to restart services "Stopped", Firefox is stayed until the fairly long for me to read the page giving suggestions for accidents. I decided to restart in safe mode, and it remained up to again. So, try to restart some services both run in safe mode appear to work (we'll see).
  
  I went to the directory of App Data\Roaming\Mozilla\Firefox\Crash reports and found two reports of incidents for 5/10. They were not in the subfolders 'pending' or 'subject '. However, when I tried to copy them to another folder, they disappeared.
  
  So, where should I go from here? I have a disabled browser that is important for my work. I especially need add-on Adobe Acrobat to work. You can fix this?
  
  
  
  Charlotte Wolter
  
  [email protected]

  Here is the list of "All reports of incidents." No multiple accidents which took place may 10 after installing 29,0 appear here. Apparently, the browser works so badly that it has not yet generated incident reports.
  
  
  
  Date of the ID report
  
  25b4b155-179a-4d09-b72e-7bde46e24f1d 21/04/2014 17:38
  
  21bbefaa-D430-446F-A0C7-efde37c24131 03/11/2014 21:32
  
  f484ca3f-b9c7-42f0-89d2-12d0d1127c1f 02/03/2014 12:12
  
  435fd93a-ae70-4a61-A216-50b62ace89a4 26/01/2014 12:55
  
  89bbd2c9-6b30-495a-BA32-ca2b1ab4035b 26/01/2014 12:44
  
  8b78e516-320F-434a-b307-153132e4df73 20/01/2014 10:11
  
  BP-a27ae405-72CC-4EC7-b989-23abe2140111 11/01/2014 10:34
  
  
  
  Finally, I saved my favorites and uninstalled Firefox completely. Then I installed the 28. It has not crashed, more. Then I upgraded to 29.0.1, and now it seems OK.
  
  But, why did I have to go through all that? That the average user could do that? N °
  
  And still no recognition of what happened with 29,0. I'd love to charge an hour for the time I spent on this or maybe I just do not contribute this year.
  
  
  
  Techlady

• Satellite L350-24U: Windows Vista crashes after installing SP2

  Hello

  I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

  STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

  I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
  THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

  I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

  I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
  I'd really be very happy for any help
  Thank you

  Hello

  I searched a bit on the Microsoft Web site and on the blue screen, I created this article:
  http://msdn.Microsoft.com/en-GB/library/ms793935.aspx

  So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

  I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
  Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx

• Tiara 9 crashes after installing LabView 8.6

  Hello

  I'm looking for a solution a problem occurred on tiara 9.0 after installing LabView 8.6.

  The software worked fine until I installed LabView. Since that time it crashes after a few seconds I already uninstalled and installed again, no progress...

  Anyone know what is the problem and how to fix it?

  Thanks in advance,

  Kind regards

  Paul

  Hello Paul,

  I have a DLL I can share with you what might solve this problem. Please contact me by e-mail: Forget DOT otmar NOR DOT comand, I'll send it to you.

  Best rgards,

• Windows 7 RC crashes after installed updates. Initial Setup works fine.

  Everyone knows about system crashes after installation of microsoft after a successful Windows 7 updates installed.  I would like to point out that the installation of the operating system is going very well and there seems to be no problem, another that I have a found unknown device that is not described here until you go into system properties.  When the windows update notification is in place there are usually 7 updates important and 36 optional updates.  Optional updates include drivers for the video card and other drivers and also a Toshiba ACPI value-added product for the General and logical devices.  I don't know what it is because I can't find any information about it.  It is not really important at this stage because everything hangs!  I had this problem since the beta version and it is still not resolved.  I have read and tried to fix this with "accidents of the Explorer of windows 7 after update" using the Microsoft fix by regedit keys.  It did not work.  I also tried various updates one at a time to see if it has an impact, without success.  I tried to go to the Toshiba website for updates, but so far there is none.  I continue to read the forums and also sent food to Microsoft beta on this problem.  Someone can help me.

  System Specs:
  Toshiba phone L355D-S7829
  AMD Turion x 2 dual core mobile RM-72
  4 MG RAM
  ATI Radeon 3100 Mobile graphics card Shared
  Dual-boot system: Vista 64/Windows 7 (64-bit) RC

  System works fine on Vista and as long I don't upgrade anything, Windows 7 works very well.  Software installs works very well as long as they do not require a video card update.  I tried to use the video driver for Vista and it still crashes.

  If I can offer any other information I can be set aside, please let me know.

  Thank you!

  James

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the Windows 7 Forum.

  These Forums you are in are to help posters with the problems of Vista.

  Windows 7 questions should be directed to the place that above.

  See you soon. Mick Murphy - Microsoft partner

• Computer Windows Vista crashed after installing Service Pack 1

  original title: SYSTEM CRASHED AFTER INSTALLATION OF SERVICE PACK 1

  Running Windows Vista Home premium. I get a message the an update for windows is available for Service Pack 1. A few weeks ago, I received the same message and proceeded to the installation of the update to Service pack 1. After I did, my computer crashed and I had to reinstall windows using the MS. technology Now I get the same message and I don't want to take a chance and run the update.  Why I get this message, and why it crashed?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• First Cisco 3.0 crashed after installing pi_technology_package - 3.0.2 - 1.0.56

  Hello

  Our first Cisco 3.0 after installing pi_technology_package - 3.0.2 - 1.0.56 crashed. SSH is available but not Web.

  Here is the story:

  1-. OVA installed

  2-. Installed the following hotfixes:

  Feature-Pack-3 - PI3.0 - 25.ubf

  4-Pack-device - PI3.0 - 15.ubf

  pi302 - 16.ubf

  pi303 - 10.ubf

  Server rebooted and everything seems to work fine.

  3-. Installed pi_technology_package - 3.0.2 - 1.0.56, rebooted and web server doesn't work anymore.

  We tried to restore a previous backup, perform a reset of db ncs and restart the ESXi machine, but without success.

  genpro01 / ncs status admin #.
  Health Monitor runs with an error. (Primary [role] [State] not configured HA)
  initHealthMonitor(): cannot start DB
  Database server is stopped
  FTP server is running
  TFTP Server is running
  MATLAB Server is running
  MATLAB Server Instance 1 is running
  MATLAB Server Instance 2 is running
  NMS server is stopped.
  Gateway of CNS with port 11011 is down
  CNS with port 11012 SSL gateway is down
  Gateway of CNS with 11013 port is down
  CNS with port 11014 SSL gateway is down
  Plug-and-Play bridge with port 61617 broker is down
  Plug n Play bridge config, image and resources are declining over https
  Plug-and-Play gateway is stopped.
  SAM Daemon is stopped.
  DA Daemon is stopped.
  genpro01 / admin #.

  Any suggestions?

  Kind regards

  David

  David,

  Unfortunately things can get really watered (technical term) with the database if the application (ncs) server is not restarted after each pack of patch installation or device. Later versions of patch began by pointing out that right from the start.

  I would say that you have two options-

  1 rebuild from scratch and just re - import devices. It is a self-service option.

  2 open a TAC case and see if they can recover the current state. The reports I got colleagues and read elsewhere here is the recovery of a failed installation of this tech pack was difficult at best.

  Sorry to be the bearer of bad news.

• Internet Explorer and Firefox, both crash after installing update KB2670838

  After installing Win7 x 64 platform update KB2670838 (as recommended) no browser would go, V19.0 Firefox and Internet Explorer V9.0.13 (32 and 64 bit) would all the crash initially upwards.

  Other programs, I tried that internet access would go directly without problem.

  Be able run any internet browser, I had to uninstall KB2670838.

  What is the problem with browsers, internet and KB2670838?

  I solved the problem of Firefox after installing IE10 by opening Firefox in Mode safe mode and disabling hardware acceleration (how to in my previous post), have not had any problems with Firefox because I have disabled hardware acceleration.

• hardware device after installing daemon tools tsstcorp l633c driver does not it appers unrecognized

  Hello

  After a while of installing daemon tools lite dvd driver tsst corp l633c ther not recognized driver

  It was with the name of DTSoftBusCd00 and tsstcorp l633c 3 drviers

  then I uninstalled the daemon tools but the same problem has not been resolved, then I used the troubleshooting and Device Manager it recognized as CD drive

  try to install the driver he repeats to me device not found please help

  Hello.

  1. you remember to make changes to your computer of the page?

  2. you have multiple DVD burning software installed on your computer?

  3. What is the brand and the model number of this DVD player?

  Follow the below mentioned steps and check if it helps.

  Step 1 Run the fixit from the below mentioned link.

  http://support.Microsoft.com/kb/982116

  Step 2. Follow the link below to run the tool material and devices,

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Step 3 Uninstall and reinstall the cd - dvd drive.
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  a. Click Start and then click Control Panel.
  b. click System and Maintenance, click System and then click on Device Manager.
  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  Step 4. The firmware was updated.

  
  I would also recommend updating the firmware of the CD - DVD drive.
  You may need to contact the manufacturer for it.

• Lightroom CC instantly always crashes after installing the new update on iMac

  I can't start over Lightroom, and the summary of the following errors appears:

  Process: Adobe Lightroom [5073]

  Path: / Applications/Adobe Lightroom/Adobe Lightroom Lightroom.app/Contents/MacOS/Adobe

  ID: com.adobe.Lightroom6

  Version: Adobe Lightroom [1083169] (6.6.1)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Lightroom [5073]

  User ID: 501

  Date/time: 2016-08-11 21:07:04.000 + 0200

  OS version: Mac OS X 10.11.1 (B 15, 42)

  Report Version: 11

  Anonymous UUID: F91AA4B1-D299-6529-670E-6BA0CC1D67A3

  Sleep/wake UUID: 616F6B20-824F-4E73-9DE0-A2284363FEA6

  Time since started awake: 13000 seconds

  Wake time: 1500 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  "Reason for terminating app due to an untrapped exception 'LuaRunException',: ' AgPathUtils.getStandardFilePath: could not create the directory where the file exists: / Users/konradmeyenberg/Library/Application Support/Adobe/Lightroom"

  ending with an exception uncaught of print type

  Abort() called

  What can I do? Uninstalling LR LR CC reinstalling and restarting of the iMac (recent Version) did not help.

  Hi DdeGannes

  After installing 10.11.6 and reinstall LR and reboot: does not help same problem still present. Of course another reason.

  Must have something to do with the directory. If anyone can help? On my labtop, it works without any problem.

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.

• Crashes after installing a new hardware, then fresh install of windows 7 on old HD

  Has decided to update some parts (motherboard, CPU, memory), and kept the source of power, hard drive, hard drive and case.  Had problems with it after the installation of the new equipment, would crash when windows starts (he did not altogether at the login screen).  So, I decided to start over with the new installation of Windows 7.  No dice, crashes again, but this time after about 10 to 30 seconds in normal mode (if I have connection immediately, otherwise it will crash if left on the login screen).

  Here is the log of the events of the last attempt to start (the oldest writing down) (including start in normal mode, then start in safe mode with networking)

  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

  {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

  {9E175B6D-F52A-11D8-B9A5-505054503030}

  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:

  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  {DD522ACC-F821-461A-A407-50B198B896DC}

  Winlogon notification subscriber was unavailable to handle a notification event.

  The next (s) starting or starting system could not load:

  discache

  spldr

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {22279AF5-03AE-4CAF-989D-2530918B2F1C}

  and APPID

  {0773CCD6-59A2-4D26-B235-19247767E645}

  the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {22279AF5-03AE-4CAF-989D-2530918B2F1C}

  and APPID

  {0773CCD6-59A2-4D26-B235-19247767E645}

  the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD software - revision: 12/04/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Passage burn in test: http://www.PassMark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Firefox crashes after installing c. 28.0

  Just installed Firefox 28.0 for Mac (via the browser) and now can't restart the program. It crashes in safe mode, after a minute or two.
  I pasted the information since the last report of crash, I sent.
  I am posting this Chrome so I can't do any automatic stuff that you would recommend. Here are all numbers of crash of today report it draws > Application Support > Firefox > Crash Reports
  BP-d5199f59-95bd-42b3-B0CE-91e782140319
  BP-64d8f6c8-ea74-4265-8bb9-4efba2140319
  BP-39b69fd3-fce3-4068-a9e1-621f52140319
  BP-2a818df6-9987-4738-8a73-332522140319
  BP-dd6b19b3-0b04-4FDD-88b7-2f6062140319
  BP-36457552-71a2-4F15-be50-448d72140319

  Update your security related software Trusteer report . If this doesn't help not try to disable or uninstall. The Trusteer report software is likely to need updating for each new version of Firefox, but can't always update automatically.

  Trusteer is apparently aware of the problem and try to get updates.

  Please report about how you will.
  It may be interesting to know exactly what that software and the version is that you are having problems with and then the version that is updated and hopefully that solves the problem.

  Forum of the cross of character references

  • Report your Crash ID
    BP-d5199f59-95bd-42b3-B0CE-91e782140319
    (More similar 5 - same signature)
  • Crash Signature: RapportTanzan28.dylib@0x270ce
  • Related bug:
    Bug 985428 - falls in rapporttanzan28.dll (report of Trusteer)

  N.B. Trusteer staff reported We found the problem and started an update of our users population. The fix will start to reach the clients in the next few hours. 2014-03-19 14:52:56 GMT
  

• 16 of Firefox crashes after installing new modules

  I'm under Firefox 16.0.2 on OSX 10.5.8, so no more updates.

  After the installation and execution of several security modules, Firefox hangs at startup upward. I think that it is these new Add-ons that seem to cause Firefox freeze and crash.

  After I run Firefox, the CPU usage starts with a pic and the fan goes crazy, until it crashes.

  I tried to start Firefox in safe mode by pressing the option of my Mac, but I don't get the impression that he really has nothing (is - done differently?).

  Improvement of systems is out of the question on this computer.

  I want to continue to use Firefox until I get a new laptop, but for now, it's pretty frustrating. I also don't want to lose my favorites, although I'm sure I can get a folder somewhere.

  So, the real question is: How can I disable addons on start up before you even start Firefox? Is this possible?

  Just to close the topic...
  I formatted my HDD and reinstalled OSX. I immediately installed 16 FF (thanks for the link!) and all the Add-ons I had before (ABP, DNTMe, difficulty of privacy and Collusion) and all is well now, works like a charm.
  I guess I just have too much clutter on my Macbook to my RAM to manage Firefox.
  Thanks for the help!

• My Satellite L510 crashes after installing IE9 update

  Hello

  I have a Toshiba Satellite L510.
  I ve so she had more than a year now and I just randomly started crashing on me after I installed an update for Internet Explorer 9.
  After the update it began to break up and goes to the blue screen. I uninstalled the update over a lot of other things that I don't use anymore. After all her uninstalls that I did, I restarted my laptop and it was fine (about 3 days), then it started crashing again. I leave my computer friend wiz point a look at it and he doesn t know what s wrong with it.

  Maybe someone here can help me please?

  Update to IE9? You may have installed Microsoft updates are available including installation of IE9?
  Installation is automatic updates of Windows or if you choose the updates manually?