the upgrade of an old HP D530C to my uncle, new mobo, cpu, ram and power supply. Using the old Tower, diskette, dvd drive and hard drive.

Similar Questions

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

  Hi all

  I have a Satellite L70-A-139 youcef.
  And at the back of the laptop, there is a cover that is fixed with a screw.

  Wil I void the warranty when I unscrew and take a look?
  I want to upgrade my HDD to SSD.
  The motherboard supports Sata III: D.

  Thank you!

  No, the mandate must still be valid.
  There is a removable cover at the bottom of the unit as shown here:
  [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

  Then you should be able to upgrade the RAM and HARD drive.
  I think this info should be mentioned in the user manual too.

• SL 410 Upgrade ram and hard drive

  Hi all

  I have been using the 410-2842-rk1 model Lenovo thinkpad SL for a year and a half.

  No problems until now

  I want to upgrade the RAM and hard drive of this machine.

  At the time of purchase, I had seen that I could improve up to 1 TB of hard drive.

  Please guide me if I can or not.

  About the RAm too, I need assistance (maximum limit I can update)

  Thanks in advance...

  You can switch to a 1 TB HDD providing it will fit physically. They are more hard are 9.5 mm thick but some hard drives of 1 TB are 12.5 mm thick. If you get a 9.5 mm HARD drive then it will work. Readers of 12.5 mm is too thick to fit.

  Regarding the RAM, you can install up to 8 GB of RAM, which is 2 x 4 GB.

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works

• The RAM and HARD drive upgrade

  Hello

  I put my laptop, at level

  8.1 Windows 64-bit, Intel Core i7-4700MP @ 2.40 GHz

  Currently 12 GB of Ram - 8 GB & 4 GB Kingston DDR3

  Currently 1 TB Toshiba HDD
  http://storage.Toshiba.EU/CMS/en/HDD/computing/product_detail.jsp?ProductID=409

  I'm looking to upgrade the 4 GB of RAM to a 8 GB, I just don't know how many pins each room has. Any guidance where to find this without disassembling the machine would be very handy! -I think it's a 204pin?

  Also looking to add a second hard drive on my machine, what is the maximum size that can take this laptop? Ideally I'd like an another 1 TB HDD (same brand) than my current. Is this possible? Then the hard drives of 1 TB overprinting two system?

  EDIT: Is it possible to have the other as an SSD? Although that can't really benefits to have as a slave instead of a master drive.

  Thank you very much

  Dan

  Hello

  Manual - Page 2

  Plug

  RAM: Yes, 204pin SODIMM SDRAM desired. You can buy the memory stick to the exact configuration & preference even brand that is already installed on your computer laptop & listed in the service manual, so that it works correctly.

  Configuration of the RAM: 8 GB DDR3L 1600 MHz PC3L-12800 1.35v SODIMM SDRAM

  Run this tool to know the configuration & Details of RAM already installed.

  Page 51 details the procedure of replacement, fairly simple.

  HDD: According to the manual, it has double drive HARD support. You can put another 1 TB 2.5 inch 9.5 mm SATA HDD. You can buy additonal material of hard drive Kit (HP PRTs number: 720237-001) to install on secondary Bay for data storage.

  I would have preferred a faster 7200 RPM HARD drive with the cache higher like this , if you want more storage.

  Alternatively, you can replace the current HDD with SSD of similar form factor (2.5 inches SATA 7 mm or 9.5 mm thick) and make as boot drive by moving the drive toward SSD HARD integer before replacement & put old HDD to secondary storage Bay. SSD would defintely thrust upward performance drastically, but they are expensive - I would say worth the cost.

  Page 48-50 details the replacement procedure. Its relatively simple to do.

  Concerning

  Visruth

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• On the Satellite A100-646 DVD drive replacement

  Hi all

  I want to replace the DVD drive on my laptop. (I never solved a lot of problems)
  Do you know if there is a list of compatibility for the A100-646 model?

  Model to suggest me?

  Thank you very much.

  Concerning
  Fabrizio

  Hello

  This info you can find in the document of the user s manual on page 7.
  I don't know which is placed in your laptop now but to choose one of the listed DVD super multi drives.

  Bye and good luck!

• The lack of CD/DVD drive - not recognized by windows or other programs

  help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)?  also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch!  Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal?  I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always.  I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again.  thx for any help

  Hello

  (1) would you please provide more information about the problem you are having with word and Internet Explorer?

  Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Green area at the bottom of my dvd drive (1/2 screen)

  When making a movie in reading I get a green area on the bottom 1/2 of the screen

  Ant corrects this problem

  When making a movie in reading I get a green area on the bottom 1/2 of the screen

  Ant corrects this problem

  =========================================
  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create the DVD...

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  And... the info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• ThinkPad R 51 Upgradation - RAM and HARD drive

  Hi all

  I have an IBM ThinkPad R51 (2887) and I wanted to improve it with 1 GB of RAM and 160 GB of HARD drive.

  But I have some doubts and need advice of experts here.

  (1) can I install RAM 1 GB PC2-5300 CL5 NP DDR2 SDRAM SODIMM instead of required 1 GB PC2700 CL2.5 NP DDR SDRAM SODIMM.

  Also enlighten me with pros & cons.

  (2) what HARD drive I should opt for a Lenovo or Western Digital brand.

  See you soon,.

  Animesh

  Welcome to the forum!

  You cannot install the PC5300 RAM in your machine, it should not physically, and if you try to force it to you will destroy the motherboard.

  Lenovo does not have its own hard drives, but tests and labels drives from other manufacturers (Seagate, Hitachi, Fujitsu,...). Any drive 9.5 mm PATA will work properly in your R51.

  I hope this helps.

• Satellite A35-S159 - can I upgrade the CPU, GPU and HARD drive?

  Hey

  I have one in my possession and I wanted to make a good game.

  I don't know if I'll be able to cause. It hurts thinking may be able to put a processor duo or quad, and I do not know if the CPU will be able to support a really good graphics card, and I also think about changing hard drive.

  Any1 know what hard drives are compatible with what I can use which are good for games?

  Hello!

  I m wondering that you want to upgrade this old notebook. In my view, that a new laptop would be a better solution.

  On the CPU and GPU upgrade I can only say s is not possible and not Toshiba support. The GPU is soldered on the motherboard and t can be exchanged.
  I think you should read this: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  The HARD drive can be upgraded. This isn t a problem.
  AFAIK the A35 Satellite is equipped with a s IDE HDD and this means that you buy a drive HARD IDE interface up to 128 GB.

  Good bye

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.