The upgrade of control VCS v7.2.2 to 8.1

Similar Questions

• Accommodation of the presence on the next information control VCS

  Hello!
  Could you please help me?

  What should I do to host the presence information of my domain name SIP not on local control of VCS, where points registered endpoint, but VCS control located in the nearby area?

  Disable the server of presence on your own VCS control while allowing the presence on VCS neighbored control server.

  Also make sure that your local SIP domain exists also on VCS neighbored control and that the rules of research between these VCS allow presence SIP traffic pass freely between the two (AnyAlias for example).

  -Andreas

• VCS-Express and the integration of control VCS

  Hello

  I have the following question on the integration between VCS and VCS Express behind NAT devices.

  Control of VCS in the configuration of the area customer I will use the (Real) Global IP address location > Peer Address or I have to use the private IP address.

  Thank you

  Hello

  It depends on the interface how you have connected on the highway. So if you have two connected interfaces then the internal one is configured with a private address, and that you would use on the control to send traffic to. But to your question, I assume you have a connected only interface so you can use the public ip address for sent traffic of venture capital control.

  Ask if you need more information.

  Best regards / / Andrey

• Devices may not work properly after the upgrade

  While trying to update, I received this message:
  "These devices does not work after the upgrade.
  Before the upgrade, we recommend that you update the drivers for those devices.
  Cancel the upgrade, open Control Panel and search for
  "update device drivers", or select the instrument manufacturer
  Web site to search for updated drivers.
   
  Storage controllers: controller IDE ASZE9NGB

  I searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!

  This diagnosis you have done to date?
   
  Did you look in Event Viewer?
   
  Error messages?
   
  Please provide details about your current problem.

  We are better able to help you if you help by providing us with as much information as possible...

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• Reinstall required for ATI Catalyst Control Center after the upgrade to Windows 8

  Updated my HP Pavilion dv7 - 70232cl to Windows 8.  I don't have any problems during the upgrade.  Now I'm asked to reinstall ATI Catalyst Control Center.  The message says that my version of ATI Catalyst Control Center is not compatible with this version of Windows.  Y at - it a patch for this problem that I can download?   Thanks, jk-3003

  And the AMD Catalyst Control Center depends on .NET 3.5 installed first, otherwise it will not install.

  Launch Control Panel, select programs, click programs and features, and then click on "Turn Windows features on or off".

  Check the first box - .NET Framework 3.5 (included .NET 2.0 and 3.0)

  Make sure you are connected to the internet, because you may have to download files from Ms.

  Once this is done install your driver AMD should be fine

• Jabber & the question of control of VCS - Inbound TLS negotiation error

  I'm just creating Jabber and control VCS. When I try to connect to Jabber I get a message "Unable to connect to server."

  In the event on the VCS log, I see the following:

  TVCS: Event = "Inbound TLS negotiation error" Service = "SIP" Src - ip = "192.168.111.124" Src-port = "49206" Dst - ip = "10.80.14.111" Dst - port - retail "5061" = "Timeout".

  When I connect to the VCS Expressway everything works great so it doesn't seem to be a provisioning question.

  Any help would be great

  Jon

  Hi Jon,

  so you are saying I can deduce that refine us this firewall problem. Now, I want to know something more.

  If you have Cisco ASA then according to me, there is a map of class set making match of highway traffic in this branch on port 5061 that is TLS?

  can you tell me if you have a few feature phone or else proxy on the firewall?

  Thank you

  Alok

• upgrading startup ORA-00205: error in the identification of control files

  Hello
  I do a manual upgrade of 10.2.04 to 11.2.03.
  
  I installed 11.2.0.3.
  Ran utlu112i.sql
  Copied TNSNAMES and LISTENER.ora, init.ora of 10g of House to the respective directories in 11g.
  A commented all the dump_dest paramteres in init.ora 11g and added the diagnostic_dest parameter
  
  exports all varaiables as follows.
  
  Export ORACLE_HOME = / oracle/ora11203
  export PATH = $ORACLE_HOME/bin: $PATH
  export ORACLE_SID = OMIGTEST
  Export TNS_ADMIN = $ORACLE_HOME/network/admin
  export ORACLE_BASE = / oracle/ora11203/app/ora11203
  
  Now when I try to start DB of the unix session where all above variables are defined, I get after publication.

  SQL> startup upgrade
  ORACLE instance started.
  
  Total System Global Area 1636892672 bytes
  Fixed Size                  2183056 bytes
  Variable Size            1090519152 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                7319552 bytes
  ORA-00205: error in identifying control file, check alert log for more info
  
  Alert log says as below.
  
  ORACLE_BASE from environment = /oracle/ora11203/app/ora11203
  Thu Aug 23 15:03:36 2012
  ALTER DATABASE   MOUNT
  ORA-00210: cannot open the specified control file
  ORA-00202: control file: '/oracle/ora11203/dbs/cntrlOMIGTEST.dbf'
  ORA-27037: unable to obtain file status
  HPUX-ia64 Error: 2: No such file or directory
  Additional information: 3
  ORA-205 signalled during: ALTER DATABASE   MOUNT...

  In init.ora 11 g (which is copied from 10 g), I commented on our path of control file entry.
  
  Well want to help me because I do the upgrade for the first time.
  
  Thank you
  
  Published by: user10698496 on August 24, 2012 02:47

  Yes.

  BR,
  Pinela.

• Control mobile/data files to a different folder during the upgrade to 10 g 9i

  Hello
  
  I'm in the process of upgrading 9.2.0.4 (Enterprise Edition - linux Redhat 4) on the same server to 10 g R2.
  
  I already finished running DBUA, but due to the bug MAXDATAFILES 100, I had to choose not to move the data files. Now that the upgrade was successful, I need to move the controlfiles, 10g 9i Home Home data files.
  
  I know I need to recreate the controlfile to support up to a trace file, but I'm confused as to what script should I use trace files because it has 2 almost identical scripts. One with RESETLOGS, another with NORESETLOGS.
  
  What is the difference between these two? The 9i database was arrested before the upgrade and supported (cold backup), whether I should not all archivelogs or online content of newspapers I think.
  
  Thank you
  Sinan

  I know I need to recreate the controlfile to support up to a trace file, but I'm confused as to what script should I use trace files because it has 2 almost identical scripts. One with RESETLOGS, another with NORESETLOGS.

  What is the difference between these two? The 9i database was arrested before the upgrade and supported (cold backup), whether I should not all archivelogs or online content of newspapers I think.

  RESETLOGS - Specify RESETLOGS, if you want the Oracle database to ignore the content of the files listed in the LOGFILE clause. These files do not have to exist. Each redo_log_file_spec in the LOGFILE clause must specify the SIZE parameter. The database assigns redo all online log file groups to thread 1 and enables this thread for public use by any instance. After using this clause, you must open the database by using the ALTER DATABASE statement RESETLOGS clause.

  NORESETLOGS - Specify NORESETLOGS if you want Oracle database to use all files in the LOGFILE clause as they were when the database was last opened. These files must exist and must be the online redo logs rather that restore backups. The database reassigns log files groups redo the nets to which they were previously allocated and reactivates the discussions that they have been previously activated.

  CREATE CONTROLFILE
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_5003.htm#SQLRF01203

  If you AutoConfig enabled, you can use quick Clone to achieve the same.

  Thank you
  Hussein

• Random OS freeze or crash after the Upgrade of the Sierra

  Since the upgrade to Sierra, I started experiencing random freezes or crashes, the operating system.

  In general, I keep the mouse control (connected via trackpad), for at least a certain period of time. However, only the movement is possible - applications cannot be selected, there is no reaction to the clicks, etc. Attempts to pass via cmd + tab don't produce no result.

  I tried waiting for the system to respond. She finally slept, then crashed with a wake on the lack of sleep.

  The other answer is a hard reset by holding down the power until button a restart is forced.

  I ran disk in rescue mode utility, and he reported no problems with the disk. I've yet to try some of the more esoteric answers as reset NVRAM and so on... which is probably intended. I saw a report that said this problem was happening with El Capitan, and there is no resolution. I don't know if it's the same problem carried over, or a new.

  I got exactly the same problem you describe, on an iMac of retina of 2014. I've updated all non - App Store applications I have thought (and removed dozens of them), disabled launch points, unplugged my USB hub, downloaded EtreCheck (very useful application, incidentally) and road to combing through reports in the Library/Logs folder. On a Reddit thread on the problems with the Macs wake from sleep after installation of Sierra, someone suggested using the following command in a Terminal: kextstat | grep - v com.apple

  The command shows you what non-Apple kernel extensions are running in the background. Extensions of core apps such as Airparrot, strap, and duo caused problems with macOS Sierra. In my case, officer was running a kernel extension - then I deleted this app and went through my library/LaunchAgents and records of the library/LaunchDaemon, remove all items launch left by home and others deleted apps.

  EtreCheck reports said that so-called SIMBL caused several accidents. So I got rid of this, by following the instructions on the site SIMBL.

  Here's the problem: even after all these efforts (and each variant reset, I could think of) troubleshooting, nothing has changed. My Mac always has exactly the symptoms you describe, upon awakening from sleep. Every time.

  In the end I just gave up and restored my iMac to its State, 4 days ago in a backup using Time Machine. (It took 12 hours). With Dropbox, I didn't lose all of the work I've done in the meantime. So, I am now running a stable El Capitan, with an understanding to why people wait a few months before installing the latest OS updates.

  Sorry I can't offer more useful troubleshooting options - but perhaps some things that did not help me could help you anyway? Thanks for posting: it seems that the Sierra has been a pretty smooth update for most people, so I guess we're just out of luck?

• CalendarAgent close unexpectedly and more after the upgrade to 10.11.5

  After the upgrade to 10.11.5, I get popup after popup stating "CalendarAgent quit unexpectedly" (forgive the change of fonts copy paste)

  He's going to stay here until I have click and then within 10 seconds, it will return. After reboot, after forcing reboots, nothing I've tried so far solves the problem.

  Anyone else having this problem?

  joelb

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Plugin Flash races to come, has no sound, since the upgrade to Ubuntu, why?

  After update Ubuntu 11.04 to 12.04 (64-bit), embedded videos managed by the Flash plugin race advance to the download speed, totally ignoring the clock. They are also silent.

  Found the problem. It is an odd. Research in the application of the Volume control (not sure if it's one thing to Gnome or Xfce - desktop is Xfce), he showed that he was failing to try to play the audio stream through "Redwood HDMI Audio" due to a Radeon video card in the system. Turn off sub tab Configuration and having integrated Audio together the appropriate (in my case) audio analog stereo sound restorations that it fixes the problem Flash video--race to advance.

  What is crazy is that the video should come race due to an audio output doesn't work. How could Adobe have never programmed Flash with this addiction?

  In any case, it appears that in the cycle of upgrading Ubuntu insisted on bring back the HDMI audio in game. Which had been set correctly - off - before the upgrade. I have HDMI to my monitor, but its speakers are analog.

• Since the upgrade Mozilla IE7 keeps indicating that it is NOT the browser by default although it is verified.

  IE7 and Mozilla worked very well, but since the upgrade to IE7 will not be the default browser. Every time I run the IE7 application it says it is not the default browser. How to solve this problem.

  If you click on start, then Control Panel, and then set the access to programs and default settings, can set you your default browser in there? Try Firefox, then assigning IE and see if that helps. So I guess he's THE desired form by default right?

• Mac has been freezing since the upgrade to El Capitan

  My mac froze just (since the upgrade to El Capitan) still today while on the internet. Has written on this subject before and submitted to the reading of the Console application, but there was no response.

  Message on the console of today reads:

  In the menu of Queries/All Messages to the system log:

  29/03/16 12:10:13.234 PM ReportCrash [7149]: call to spindump for pid = 7118 wakeups_rate = 155 duration = 291 because of excessive Awakenings

  The diagnosis and use of Messages:

  29/03/16 12:10:14.222 PM spindump [668]: com.apple.message.domain: com.apple.crashreporter.writereport.wakeups_resource.diag

  com Apple.message.signature: com.apple.WebKit.Plugin.64

  com Apple.message.signature2: UNBUNDLED | 11601 (11601.5.17.1) ((null))

  com Apple.message.signature3: alarm clocks

  com Apple.message.Result: noop

  com Apple.message.summarize: YES

  SenderMachUUID: 63E4F244-A146-3809-8016-6172E1C11CB1

  Any help would be most appreciated.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• El Capitan sign of a sudden in the last days (before and after the upgrade to 10.11.4 too)

  Hello

  El Capitan signed all of a sudden and then requires the password, it occurs usually once a day. This problem started last weekend before spent 10.11.4 and remained after the upgrade).

  I noticed that this happens usually when I play videos with VLC's .flv and the system is unable to show that the video itself only plays the sound, and after a few minutes that she signed all of a sudden. (I have a MacBook Pro (15-inch, mid-2015, retina, 2.5 GHz Intel Core i7))

  You have noticed the same problem?

  I'm looking forward to your kind help, thanks in advance!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process (WindowServer or loginwindow).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.