The upgrade of my CPU and memory

Similar Questions

• The upgrade of my CPU and RAM

  Dear Sir.

  I want to upgrade my laptop.

  The current specification is:-

  System manufacturer Hewlett-Packard
  HP Pavilion dv6 Notebook PC model system
  System Type x 64-based PC
  Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz, 2534 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Hewlett-Packard F.29, 11/07/2011

  Hardware Abstraction LayerVersion = "6.1.7600.16385".

  Physical memory (RAM) installed 6,00 GB.

  Card mother HP has 144, 65,38

  What is the best and optimal upgrade is possible. I need more CPU power and more memory for my data mining research project.

  Thanks a lot for your help.

  Kind regards

  Faisal

  Probably, you don't realize the difficulty and costs involved with your laptop CPU upgrade. If your program is saturate an i5 2.53 GHz processor, you can do the work on a newer desktop with a Quad Core i7 CPU. The other 2 GB of RAM might help a little, but it looks like you need a boost in computing power and you have not only any significant margin on this machine. It's a first i5 of gen which cannot be upgraded to a newer version. I7 Quad Cores on this series of model use a different motherboard that two hearts. The best dual core processor is:

  Processor Intel Core i5 - 580 M to 2.66 GHz, turbo up to 3.33 GHz, Dual 35 W SC

  Not a big improvement over what you have

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Unable to increase the CPU and memory in vRA in the Server tab billing information is not responsible to reconfigure

  Unable to increase the CPU and memory in vRA in the Server tab billing information is not responsible to reconfigure

  Please make the task below

  1. go Vcenter and check what VLAN is assigned note this number of VLANs

  2. go on the reservation tab and in the network profile enable VLAN

  3 do this data collection

  4. they that you try to configure the processor and memory, that it should work

• Settings of CPU and memory of reserve on the virtual machine running...

  Hello.

  I have two virtual machines in production with CPU and memory settings of reservation applied as shown below. I want to adjust these settings of reservation to "zero" for the CPU and memory on both virtual machines.

  I can make these adjustments while VMS are running, or do I need to power their first?

  Any advice would be appreciated.

  Thank you!

  

  

  Welcome to the community,

  Booking of resources being completely transparent for the customer, i.e. a host function, there is no need to turn off the virtual machines. Basically all settings in are available to be changed in the editable GUI generally without interruption of service comments.

  André

• Average use of CPU and memory of the ESX host

  Dear team

  script of powercli necessary to fetch the last 2 month avg cpu and memory utilzaition for all ESX hosts that are managed by vcenter server.

  concerning

  Mr. Vmware

  Try something like this

  $esx = Get-VMHost
  $start = (Get-Date).AddMonths(-2)
  $metric = "cpu.usage.average","mem.usage.average"
  Get-Stat -Entity $esx -Start $start -Stat $metric | Group-Object -Property {$_.Entity.Name} |
  Select @{N="VMHost";E={$_.Name}},  @{N="Avg CPU %";E={$_.Group | where {$_.MetricId -eq "cpu.usage.average"} |
      Measure-Object -Property Value -Average | Select -ExpandProperty Average}},  @{N="Avg Memory %";E={$_.Group | where {$_.MetricId -eq "mem.usage.average"} |
      Measure-Object -Property Value -Average | Select -ExpandProperty Average}}
  

• script to check my current reserves of CPU and memory on the service console

  Hello

  I'm looking for a script to check that reserve is currently, we are running out of problems with vRanger connection, just need to make sure we have all the cpu and memory to the correct value.

  found a few scripts to change, that we guys do you use?

  Thank you

  The script required PowerShell v2.

  Try this if you use PowerShell v1.

  filter Get-ConsoleResource{
       param(
            $entity
       )
  
       begin{
            $result = $null
       }
       process{
            if($_.Key -eq "host/vim/console"){
                 $_
            }
            if($_.Child){
                 $_.Child | Get-ConsoleResource
            }
       }
       end{
       }
  }
  
  Get-View -ViewType HostSystem | %{
       $esx = $_
       $_.SystemResources.Child | Get-ConsoleResource | Select @{N="Name";E={$esx.Name}},
            @{N="Console Reservation CPU MHz";E={$_.Config.CpuAllocation.reservation}},
            @{N="Console Reservation Memory MB";E={$_.Config.MemoryAllocation.reservation}}
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Window Media Player.exe using 100% of CPU and memory

  I have a Pavilion dv4-2145-dx Windows 7 Ultimate SP1, 4 GB of memory. Windows Media Player.exe supports my CPU 100% usage and it is striking all my memory - 4 GB.   It started right after I set up a homegroup.

  I had to go into Admin/service and change the Startup Type to disabled for:

  • Windows Media Center Receiver Service
  • The window media services planning service
  • Windows Media Player Network Sharing Service

  I tried setting services to manual, but Windows Media Player has yet caught all the CPU and memory, he could then I disabled all the.

  I do not know how to disable homegroup and Windows Media Player services work together so I wonder if everything is always operate has designed with the homegroup and sharing my music.

  Hello

  I think this explains the problem.  The 2 entries here should be deleted, because the first will try to index all of your user profile and the second will attempt to index all of the Windows Partition.

  C:\Users\Rick

  C:\

  To remove them, click to the left of the entrance, highlight it, and then click Remove.  When these two entries have been removed, reboot the laptop and you should find that the problem has been resolved.

  Kind regards

  DP - K

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Free version of 5.5 (CPU and memory limits)

  Hello

  Is there a limit CPU and memory if I run the free version of 5.5?  I remember that there is a limitation of a socket (CPU), but am not sure, maybe it was the old version.

  Thanks in advance.

  TT

  If I'm mistaken, the only limitation with the free 5.5 ESXi hypervisor is the 8 vCPU maximum of VMS and the restrictions for hardware virtual version 9 (5.1 compatibility) with the vSphere Client. Previous versions had all kinds of different limitations, like carrots by socket, physical memory,..., but that all left with the current version.

  André

• HP Elite m9280in - upgrade possibilities - RAM, CPU and hard drive

  Ask your help to provide desktop HP Elite m9280in maximum possible power by upgrading the processor, hard drive and RAM. Basic information is given below.
  Motherboard
  IPIBL-(Berkeley)
  Manufacturer: Asus
  Form factor: Μatx
  Chipset: Intel G33
  Storage media: 4 x DDR2
  Front side bus speed: 1333, 1066 and 800 Mhz
  Processor socket: 775
  Expansion slots:
  1 PCI Express x 16
  2 PCI Express x 1

  Processor
  Core 2 Duo E4600
  Speed: up to 2.4 GHz
  Number of cores: 2
  Socket: 775
  Bus speed: 800 MHz

  Memory
  2 GB
  Amount: 2 GB
  Speed: PC2-5300 MB/s

  Hello rajeshdugar, I checked the specifications of your system, which can be found here .

  These features tell you almost all the information you need to improve your system.

  The only concern here is the power of the power supply. It is more likely isn't enough to provide sufficient power to add the maximum processor, video card and memory.

  To do this safely, you must consider replacing the power supply with a higher power supply.

  Given all of these improvements, you could almost buy a new system with these upgraded components for a cost slightly higher than the level of your current system.

  I hope this helps.

• -Plug hot CPU and memory

  Hello.

  I'll try the new features of vSphere and have a double with the addition of a CPU or memory to a virtual machine while it is running.

  First of all, Microsoft said that only the data center itanium editions and supports the addition of hot CPU, but I found some forums who say they did the test with other editions as standard or enterprice, is this posible?

  http://www.Microsoft.com/windowsserver2008/en/us/R2-compare-specs.aspx

  http://www.Microsoft.com/windowsserver2003/evaluation/features/comparefeatures.mspx

  I tried with a windows server 2008 standard x 64 and when I added a CPU Device Manager shows me 2 CPUs, but the Task Manager doesn't show one and when I added to that memory, the Task Manager shows no change, but Device Manager shows the new memory module with an alert.

  When I restart the virtual machine to the new hardware configuration worked well.

  If windows does not support hot branch of CPU and memory in the data center and itanium editions, why is the option available (when we edit a virtual machine) for other editions as standard?

  Thank you...

  Here is a good list which has been implemented and seems to be fairly well validated.  But the result is, it has windows and a restart could never hurt.

  http://www.Boche.net/blog/index.php/2009/05/10/vSphere-memory-hot-add-CPU-hot-plug/

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.

• I need to uninstall I-Tunes before the upgrade to Windows 7 and I'm afraid that I do; lose the music library?

  I need to uninstall I-Tunes before the upgrade to Windows 7 and I'm afraid that I do; lose any music library?  I'll be able to download I Tunes and recover my music library >?
  original title: Windows 7 upgrade from VISTA?

  Hi Jrawie,

  If you want to upgrade Windows Vista to Windows 7, you won't lose iTunes music library. However, there is a chance of losing the music of iTunes library if you choose custom installation.

  You can see the Microsoft article for more information on the upgrade:

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You can also view the article mentioned for more information:

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/UpgradeAdvisor

  Let us know the results.

• I want to uninstall the upgrade of windows 7 and go back to Vista.

  This device comes preinstalled with Vista so that I only have the recovery disks that I made when I first set up the computer.  How can I uninstall the upgrade of windows 7 and reinstall Vista?

  BogeyB,

  If you have made a real upgrade (overlay on Vista), you might be surprised.  Click on the computer and open the D Recovery drive.  Open the folder named Recovery. Look at the bottom left corner.

  What is the date of creation?  Mine is from 2007.  I do not superimpose WIN 7 until 2011, but the recovery is still 2007.

  It's actually your full version of Vista recovery... it didn't get deleted or altered, except if you did.

• I think I have a virus or spyware. It seems that it is running dllhst3g exe and take a lot of CPU and memory. Anyone know if this is a virus?

  I think I have a virus or spyware.  It seems that it is running dllhst3g exe and take a lot of CPU and memory.  Anyone know if this is a virus?

  Malware or a virus infection

  http://www.bleepingcomputer.com/tutorials/how-to-remove-a-Trojan-virus-worm-or-malware/