The upgrade of RAM and adding the Bluetooth Module in VOSTRO 1500

Similar Questions

• Satellite Pro M70 - what is the Bluetooth module reference number

  Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?

  You can reed one of the labels under your laptop. You can read bluetooth inside, the reference is in the left side of the label, and it will be something like this: PA3418U-BTM.

  Thank you.

  Hello

  Why you n t make a call to the service allowed in your country partner and would order a compatible BT module for your laptop?
  In my opinion, it would be the best way to get a.

  Unfortunately I m no owner of the satellite Pro M70 and, therefore, I have don t know the part number for BT. But my A210 has been equipped with an internal module of BT and PA3608U-1BTM part number

  Welcome them

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.

• the upgrade my ram and gpu

  Product name: HP 1000 Notebook PC

  Product number: F0C66PA #ABG

  I want to upgrade my ram 6 GB or 8... I do not know the maximum capacity of my laptop and it is also possible to add a gpu in this laptop?

  No manuals or technical information available to me,

  He said:
  http://images.crucial.com/upgrade/HP+-+Compaq-memory/HP+1000+series/HP+1000-1410AU-upgrades.html

  GPU in most laptop today cannot be upgraded, it integrated or soldered on motherboard in the round.

  Kind regards

• Peut a Dell 17R-N7010, receive the upgrade of ram and a graphics card?

  Hello

  I have recently become interested in being a pc player, but my computer is just not powerful to play games. Written IM see if someone could tell me if a Dell 17R-N7010, receive a graphics card and put upgraded ram and if so if you could tell me what it is and where to buy.

  Thank you

  RAM can be upgraded to max 8G (2 X 4).
  Video chip cannot be upgraded.

• HP 15-ac140ne: upgrade of ram and ssd

  can increase the 16 GB ram
  and m2 ssd installation

  Hello

  1 RAM: Guide:

  Two not customer-accessible/upgradable memory slots (Intel Core processors) module DDR3L-1600 channel double support
  Support of the single channel DDR3L-1600
  Supports up to 8 GB of RAM in the following configurations:
  8192 MB total system memory (8192 × 1.) or (4096 x 2)
  Memory system total 6144 MB (4096 x 1) + (2 048 × 1)
  Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)
  Total system memory of 2048 MB (2 048 × 1).

  2 mSATA: no, it doesn't have a slot mSATA

  Kind regards.

• Satellite-C55-A-1NU - upgrade of RAM and SSD upgrade information

  I have a Toshiba Satellite C55-A-1NU and I want to know if it is possible to replace the optical drive with an SSD? Can someone tell me what I need to do? What type of rack and SSD should I buy. Thank you

  I also want to improve the ram memory, the laptop has only 1 slot 4 GB ddr3 1600 mhz, but is single channel. Which model should I buy to work in dual channel I use cpu-z to identify the model and it shows me hmt451s6mfr8a do I need exactly this or I can put another ty of manufacturing 2.

  This upgrade with SSD is not supported by Toshiba, so everything you do is at your risk. Check this forum please. If I m remembering although some people have already posted own experiences.
  I think that in most cases they ordered this caddy HDD/SSD but the drive was not recognized at all.

  In my opinion, you must perform these updates.

  RAM
  Up to 16 GB of RAM according to specification for laptop, you can put on level and on the lower part under the cover of memory, you should find two memory locations. How to change RAM is described in s. manuals check please page 72.

  The memory modules are compatible RAM for your laptop model:
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

• How to install the Bluetooth Module for Tecra S1

  Hello
  I have an old model S1 - PT831E-1DCEE-GR - and you want to install a Bluetooth (PA3121U-1BTM model?), but where should it be mounted?

  Kind regards

  Ulf

  Hello

  I think that on the Tecra S1 Bluetooth is optional.
  So on some laptops the BT has been installed on some not but I think that it should be possible to upgrade the unit with the BT module. (I hope ;))

  To my knowledge, the BT module must be installed in the place under the keyboard.
  But if you have no experience in these procedures you should t remove or install anything!

  The BT card must be placed above the keyboard area.
  To remove or to install the Bluetooth card, you must:
  1. remove the two white flat head screws.
  2 unplug the cable to antenna with the tweezers.
  3. disconnect the cards-SUMI (flat cables) on the system board.
  4 (remove the Bluetooth card) or (install the Bluetooth card)

  Be careful. But as I said above, usually it should be installed by a technician because the guys have more experience... you know

• HP compaq 610: I want to upgrade my ram and cpu

  Hello

  I have a laptop HP compaq 610 with a intel core 2 duo 2 GHz with 4 GB of ram and a 64-bit processor

  It is therefore not good for games

  now I ask you for the the hardware options available for the upgrade of my camera

  I wanted to add a 8 GB of DDR3 ram and a 3 GHz cpu

  so can I use RAM

  and what are the cpu options can you give me

  Thank you for your valuable time.

  LoRdRedh wrote:
  

  Thank you very much

  It is just that this processor is not good for the games so I have any options?

  You need to get a gaming laptop and those cost 2000US started playing HD games.

• Upgrade of RAM and Intel graphics

  Hello
  I recently discovered that I could improve my graphics ram and intel. So I went to the performance and tools tgen relize my rankings are not the base score is 4.6 and gamming is 5.2 so you have any recommendations on new graphics for 32-bit operating system and then I put my ram from 4 GB to more than that.

  Hello

  First, your machine is running 32-bit, the RAM upgrade anything more than 4 GB is wasting money because the 32 bit OS can not access to more than 4 Gb. Second, you cannot upgrade the Intel video chip, it is soldered to the motherboard.

  Kind regards.

• Upgrade of RAM and SSD

  I have two questions about my dv7-6b77dx.

  (1) upgrade of RAM:

  I want to upgrade my memory to 4 4 + 2 + 4. What I need to get the same exact 4 GB of RAM (CPU - said Z it's Samsung M471B5273DH0-CH9) or can I get the 4 GB of RAM? I ask this because I do not know if both modules must be the same for memory dual channel. Also, the new Samsung models 30nm with less power consumption while my 4 GB is 40nm. Would it be a problem if I am connected a 30nm and 40 nm?

  (2) SSD:

  I want to make sure that AHCI is enabled for the new SSD. I googled and it says it should be configurable in BIOS but my BIOS isn't that kind of environment. My Core I7 2670QM processor and I couldn't have something on the chipset CPU - Z other than "Intel." How can I activate the AHCI or check if it is enabled?

  Thank you very much!

  burqq wrote:

  I have two questions about my dv7-6b77dx.

  (1) upgrade of RAM:

  I want to upgrade my memory to 4 4 + 2 + 4. What I need to get the same exact 4 GB of RAM (CPU - said Z it's Samsung M471B5273DH0-CH9) or can I get the 4 GB of RAM? I ask this because I do not know if both modules must be the same for memory dual channel. Also, the new Samsung models 30nm with less power consumption while my 4 GB is 40nm. Would it be a problem if I am connected a 30nm and 40 nm?

  If you want to upgrade memory for the first time, it is installed to work always buy and install a pair of identical modules. Do not mix and match manufacturers or of the different capacity modules or configurations.

  (2) SSD:

  I want to make sure that AHCI is enabled for the new SSD. I googled and it says it should be configurable in BIOS but my BIOS isn't that kind of environment. My Core I7 2670QM processor and I couldn't have something on the chipset CPU - Z other than "Intel." How can I activate the AHCI or check if it is enabled?

  The installed chipset is Intel HM65 Express chipset. Your laptop supports SSDS. Normally, you can verify that ACHI is used by checking the configuration of the BIOS. It's unfortunate, but a BIOS HP does not gve you the ability to configure SATA IDE (emulation) or AHCI.  You can use a free utility called PCWizard 2010 to determine what disk controller is installed and the operating mode in. Comes from the following image in Windows 7 and the PC is a desktop computer with an ASUS Crosshair IV Formula motherboard

  Thank you very much!

  

• is it possble to upgrade of ram and storage for Aspire P3

  I have Aspire P3, I love him...

  Currently only is 2 GB of Ram and 60 GB of storage, possible to upgrade to 120 GB of storage? and 4 GB of ram?

  Thank you

  Aries is shipped, is not extensible.

  The SSD would require a complete disassembly of system upgrade and is not supported.

  We offer versions of the P3 Aspire with 4 GB of RAM and a 120 GB SSD.

• Upgrade of RAM and windows stops and restarts automatically when it tries to load.

  I recently updated my computer running:

  Motherborard: ASUS Crosshair V Formula

  Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)

  RAM: 2 x 4 GB Corsair vengeance 1600 Mhz

  I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load.  Any suggestions on how to get this extra memory working out to change my Linux operating system?

  Thank you

  Chris

  Hi Chris,

  You can try to connect a single stick of RAM at a time and see what happens.

  If you are not facing problems, then try to swap the RAM sticks and check for the issue.

• Disable the touchpad with Dell Vostro 1500

  How can I disable/enable the touch pad? It makes me crazy when you type the letters. I have a DELL VOSTRO 1500.

  How can I disable/enable the touch pad? It makes me crazy when you type the letters. I have a DELL VOSTRO 1500.

  I gave an answer to the same question. Please click the link in this thread:
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/e5f45e65-1732-44e9-AF28-3bea88fe123f/#aee5f6fd-B0A6-4009-Ba94-b8ab965087a7

  t-4-2

• HP Elitebook 8560w: upgrade my ram and the correct use of slots

  Hello - my first post!

  I just bought HP 8560w refurbished seller.  It has a quad core processor and four ram slots.  I can post the SN and product number if it helps with my request.

  I want to max out my ram without disturbing the keyboard.  I currently have 4 x 4 ram installed so that four locations are used.  My machine will support a maximum of 32 of ram.

  Here is the query - I can remove the 2 ram sticks of the slots I can easily see when I remove the back (I guess these are slots 3 & 4) and replace them with 2 sticks 8 ram each?

  It would give me a total of 24 ram - 2 x 4 under the keyboard (slots 1 & 2) and 2 x 8 in two other passers-by.

  This upgrade would be OK and be recognized by the system?

  Thank you, Russ.

  Hi, Russ:

  It seems that you can according to the maintenance manual.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03424153-1.PDF

  He says that one of the compartment of the expansion memory slot should be filled with a chip to add a slot 2.

  It also says the same thing about the locations of primary memory under the KB.

  See Chapter 4, page 51.