The VISA almost a DLL call

Similar Questions

• The DLL call fails when DLL uses a wide range

  I call a C++ dll in LabVIEW 32-bit on Windows 7. I kept getting error 1097 and finally understood it is because the dll uses two large paintings of 5 MB each. The tables are initialized in the constructor of an object, malloc is not used, or whatever it is. If I do the smaller berries, then everything works fine.

  The problem is not difficult to work around, now that I know what is the cause, but can someone tell me why a dll using a lot of memory would be a problem? I feel that 10 MB is really a lot of memory to use on modern computers.

  OK, you can test the appeal of the DLL in a Visual Studio test harness?

  In addition, in case you haven't seen another 'DLL error 1097' son type, here are a few. The cause of 1097 in your case can be illuminated by a multitude of courses of troubleshooting:

  Call dll error 1097

  Error code coming 1097 in DLL call

  error 1097 after the call dll function that allocates memory inside

  1097 error in the transition from table from C++ DLL for LabView (seems very relevant, although long)

  I know there are a lot of reading, but there is a good chance that the magic trick is in one of these threads already. We will ride on the shoulders of their work.

• Sims House Party, the installation program starts, then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  original title: error number: 0 x 80040707
  When I try to install the Sims House Party, the installer launches and then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  According to the compatility of Windows 7, the House Party is compatible under 64-bit and 32-bit Windows 7. I tried to install it on another computer running Windows 7 32 bit and the error does not occur.

  I am running Windows 7 Professional 64 bit.

  Looks like that method 1 solved my problem.  Normally, I would get this message several times a day.  For more than 3 hours I applied the method 1, and the error has not appeared again.  Thank you very much.

• What is the diference between TosBtObexApi.dll & tosobex.dll

  Hello
  I am writing an application to transfer files using the toshiba bluetooth software. Toshiba bluetooth sdk's API to support the obex file transfer, but requires a TosBtObexApi.dll dll that is supposed to be present in my toshiba bluetooth stack. I searched the dll in my carpet, but my battery contains a dll called tosobex.dll but not TosBtObexApi.dll. Can someone tell me why there is a difference and how can I solve it.

  -Deepak

  Hello Deepak

  In my opinion, this is a bad place for that matter!
  It is a Toshiba forum and here you will find only common users who share knowledge and try to solve problems with Toshiba laptops.

  It seems that you are a programmer and in my opinion, you should visit a forum only for programmers.
  However, you can hope and maybe someone will be able to help you good luck

• From two hexagonal numbers as a variable byte in dll calls

  I imported a DLL, which works well when it was called by C++ codes.  However, a few screws converted did not work properly.  The original functions were supposed to write a set of two hexadecimal numbers (one byte in size) to an address specified in the form of two characters.  Somehow after these functions have been converted to screw, they wrote the first hexagonal number and ignore the rest.  My speculation is that, given that this variable is declared as a type byte, the VIs may only take the first hexadecimal digit as a character (also a byte in size) and ignored the following hexadecimal number.  Has anyone ran into similar problems?

  Configure the setting in COLD LAKE to be a U8 integer instead of a string.

• iPhone 7 more than the quality of his phone call

  We just got 2 new iPhone 7 more ' and I noticed that the audio quality of incoming calls on the two strange sounds.  I have the incoming of the distant sounds on the phone and Apple's leather case.  As he is coming from behind the phone or something.  Looks almost like the phone's speaker, but it is not.  The volume help a little but it seems turned off.  Previous, I had an iPhone 6 so I don't know how that compares to Plus 6.

  Any help is appreciated!

  Thank you!

  Hi there, Steven Fisher1!

  Thank you for joining the communities Support from Apple! Looks like you are having problems with the sound quality on the iPhone 7 more. I know how important it if of course the sound working properly at all times. Read this article here If you hear no sound or distorted sound of your iPhone, iPad or iPod touch President. This will give you some steps to try to get the problem taken care of.

  See you soon!

• Driver dll call

  I am writing a LabView program to control a card scanner. The manufacturer provided a DLL and some examples of C/C++ code for this.  My problem is to find a way to pass the handle from driver in LabView.  C code to call this dll looks like this:

  # define drv_handle void * / / this is the header

  drv_handle hDrv; Returns the handle to the open pilot or NULL in case of error
  hDrv = spcm_hOpen ("/ dev/spcm0"); string the driver to open

  I can get the card to initialize correctly. I can't understand how to move the vacuum * through LabView in other functions.  Any suggestions or places to watch?

  That would have to be a "pointer size whole." signed or unsigned any really, but you should definitely maintain coherent and personally, not signed.

• Method to check the VISA resources is ready for writing.

  Dear Forum, I have a piece of equipment that I connect to LabView via serial. The companion of the Instrument is of course completely useless, which fails for inexplicable reasons, but everything works perfectly in hyperterminal.

  When I try to adapt the example "basic series write and Read.vi" at my request, the implementation is very simple. However, it does not work despite working in hyperterminal. After a bit of investigation, I have determined that the problem is that after "VISA set up Serial Port" port is not * actually * available for writing quite yet, most likely because it is a very old computer.

  By inserting a delay between the "VISA set up Serial Port" and the "VISA Write" I am able to get the program works as expected 100% of the time. However, it is a very bad solution, because this long delay can be totally useless and performance on the computer to an end user (which may be much better than this one). Especially because this piece of equipment has 8 analog inputs, 8 analog outputs, 4 relay, 20 outputs 24VDC, 8 DIOs and 3 ports RS232 passthrough so it communicates a lot of data.

  Is there a function I can use to * guarantee * that the COM port is really ready for writing? If I could do this, then it can return almost immediately on a fast computer, while leaving enough time for computers slower finish opening the port. It may well be something that happens on the side of the pilot of the command windows open port.

  It comes to LabView 8.20 running on a Windows XP in VirtualBox on Linux host. Please don't just tell me that I shouldn't use virtualized Windows, I am sure that this problem occurs for the disabled of old material as well as it is the only significant in terms of series API difference. The virtualized instance is only likely to be more slow material dealing with than it would be otherwise.

  You can get information on the creation of an Instrument Driver Networkdriver.

  If your instrument does not return an ID and you can not do a reset, then obviously your initialize function would not code for this. Having the code that defines the instrument on certain default configuration is common.

  I don't know how this driver is intended to be used. Do you want that he NOR certified. The driver needs to be distributed outside of your company? It seems that the problem with your com port is unique to your pc and the installation program. How many times this would appear to other users?

• Set the string for LabView dll parameter

  Hello

  I created a simple vi LV 2010 (departure vi), which reads the identification of an oscilloscope. Then I take this vi and incorporate it into a dll of LabView. I have test the dll calling LabView (RunFrom dll). Basically, it seems to work, but len and ReadBuffer back empty. It must be in the way I'm configuration configuring the setting for Readbuffer (settings) in the configuration of the dll. I tried several different configurations, but nothing seems to work. Any help is appreciated!

  What is the parameter len?  Normally, you should only set the length of the string, but it seems that you did not do this.  Also, you're passing len by value, and not by reference, so the function is expecting her to be a starter and you will never get return a different value to any value that you provide.

  Do not use a local variable of the ReadBuffer for entry "readbuffer".  You must pass a string initialized long enough to contain the expected quantity of data.  The best way to proceed is to use the array to initialize to create a table of U8, then use the array of bytes to a string.  Set the parameter 'minimum size' to 'len' then run through the length of the string initialized (this is not mandatory but is recommended).  If you need the length obtained output, add another indicator and another parameter to this value.  There might be a way to do it with one by len parameter passing by reference, you need to experiment (it is certainly feasible in C but I don't know if allows him to LabVIEW).

• Cannot print the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL was not loaded"

  Original title: "Prop Res DLL not loaded".

  Try printing the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL not loaded" How can I load it? Typically get this message when I print review copy. My system is Windows XP.32 bits

  Hi Robert,.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Let's uninstall and reinstall the Lexmark X 1185 printer drivers.

  To uninstall the printer software, see the following link.

  http://support.Microsoft.com/kb/307895

  
  

  Restart the computer, visit the following link and install the printer drivers.

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1185&page=product&searchID=1368834464501&locale=en&UserLocale=en_US#1

  If the method above does not work, follow the steps in the next method.

  Method 2: Error Message When you try to print or save a document in OneNote 2007 or in Word 2007: "Prop Res DLL not loading" or "Cannot load Library DLBAPRP.dll"

  http://support.Microsoft.com/kb/918730

  Note: suggested above steps are applied to your scenario as well.

   
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• The logon User Interface DLL Masgina.dll failed to load?

  Hello

  My name is Shelley, I really honestly do nothing about computers and my computer at home, which is a dell with windows xp pro.   was working fine, then 1 morning I rose and ithad a blue screen with the message about it.

  The logon User Interface DLL msgina.dll failed to load.  Contact your system administrator to replace the DLL or restore the original DLL.         then she had a reset button to push.  When I pressed the button, the display cover Dell and then he showed the sreen of coverage of Microsoft Windows XP, then he can go right the message telling me that. The User Interface DLL failed.

  Now, my computer has been sitting there for 2 weeks, and no one can use it.  Now, I'm on my cell phone the school for 17 years.

  What should I take my computer in a store or is - something simple, maybe, I can do myself?

  OH and if you know, the computer is at my daughters school, they have gave to her, because she had really great classes and she's in schools IB program, so they gave him a computer to have at home, it is set up for academic use, I know not whether that counts or not.  She got a new laptop for Christmas. Other people in the House are now using the computer to play games and watch videos from YouTube.

  Can someone help me?   Thank you, Shelley

  Hello

  ·        You're able to boot in safe mode?

  ·        Remember to make changes to the system?

  Method 1:

  If you are able to boot into safe mode then I suggest to do a system restore to a previous point when the system worked very well and check.

  Step 1:

  I suggest to start in safe mode and check if the problem persists.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2:

  I suggest you do a system restore and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  I suggest you to consult the article below.

  "Logon user DLL Msgina.dll failed to load Interface" error after you have installed the MS04-003 security update

  http://support.Microsoft.com/kb/836683

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• during the installation of Windows XP, I get this error "the ordinal 410" "urlmon.dll" not found. Is there a way to do anything with XP. I'm in the middle of the installation

  My PC has a virus where it could not display icons, taskbar just shows the background wallpaper... my last resort is to reload XP... so I started and got this error "the ordinal 410" "urlmon.dll" not found.

  Hi Dodamoda,

  Thanks for posting. Do you get this error when starting Internet Explorer or some other place? Also, you said that the last resort was to recharge. Reload you the entire operating system already? Regarding the DLL error that you've published, please follow the article below the link if this problem is when you start Internet Explorer.

  http://support.Microsoft.com/kb/254490

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.