The wifi Lenovo L512 on winXp driver installation

Similar Questions

• Pavilion Gaming 15-ak001nq: where can I find the software for my ACPI\HPQ6007 driver installation?

  Hi all

  I recently acquired a HP Pavilion 15-ak001nq Gaming and I am having problems with the installation of an unknown device with ID: ACPI\VEN_HPQ & DEV_6007 (ACPI\HPQ6007). Can someone offer me assistance? Also, I 8.1 for Windows 64-bit installed.

  Hello:

  You need this driver...

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71839.exe

• Downgraded Acer Aspire V3 575 G for windows 7, but impossible to install the wifi driver

  Hi, I got a new laptop yesterday, the model is Acer Aspire V3 575 G 73ZZ. I didn't like the 10 preinstalled with windows so I installed a new copy of windows 7 on it. However, once the installation is complete, none of my drivers work. I went looking for the drivers for my model, but they were all for windows 10 and were not compatible with my laptop. I tried to install the drivers wifi during the night, but none of them work on my laptop.

  Does anyone know what wifi Drivers to install so it can run on windows 7?

  I found the solution to my problem! I did a search on acer and discovered that my device is using Win Driver Atheros Wireless LAN (NFA344) 10 64-bit, so I did a search on Google to find the version of Win 7 64 bit for the driver and came across this page: http://support.lenovo.com/sg/en/downloads/ds105865

  Even if the driver is Lenovo, but I ran on my Acer Aspire V3 575 G and it worked perfectly. I am able to connect to the wifi now!

• HP G1 241: impossible to install the wifi driver.

  In the only victory of pilot page 8.1 is mentioned. I use win7 64 bit, everything works well except the wifi driver.

  I also downloaded the series qualcomm-atheros, but its not to proceed with the installation.

  Please send me a link to download appropriate to access wifi.

  Hello:

  You need these drivers wireless and bluetooth for this card template...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_149229_1 & swEnvOid = 4059

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_158189_1 & swEnvOid = 4059

• HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

  Hello

  I just installed Windows 7 Ultimate 32 Bit OS. After installation, I downloaded all the files required from the Internet HP website driver installation.

  All the drivers have been installed end, except for the Wifi card.

  When I start to install the wifi driver, after extraction of the file in the "Swsetup" folder in the C drive, installation does not start. I don't know what to do.

  Help, please.

  Hello:

  You install the correct drivers?

  The BOM indicates that your laptop comes with the 9485GN 1 x 1 WiFi 802.11b/g/n Atheros card and Bluetooth 4.0 3012 combination, then that would be the drivers you need for the wireless and bluetooth...

  http://PartSurfer.HP.com/search.aspx?SearchText=B8N01PA

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  File name: sp56573.exe

• Impossible to install the WiFi Hp655 driver

  Hello

  just bought HP655, fresh Win7, installed everything, but the WiFI drivers drive me crazy. The installation starts but can't finish. The window disappears. In Device manager yellow network controller. I tried the two sp56889.exe and

  sp56942.exe

  Any ideas?

  Thank you

  Thank you, Paul, that's what I have this check driver atheros, but in the driver support HP they give me Ralink driver for Hp655.Why is that?

  Thank you anywhay. Appreciated

• X 301 Vista Sp1 64-bit WiFi Driver 5300 AGN: it is not possible to turn on the WiFi radio

  I have a X 301 S/N xx-xxxxx computer laptop installed with Vista Business Professional 64 - bit SP1. A few days ago, I updated the drivers via ThinkVantage "Update my system" tool, including the WiFi pilot. Now I have the Intel(r) WiFi Link 5300 AGN driver 13.2.0.30 version. After installing this driver WiFI Radio does not work: it is not possible to turn on the WiFi radio.

  Program has been installed during this update Intel PROSet/Wireless tools. In the menu to diagnose the hardware test fails for this device, claiming that the wireless adapter is disabled or uninstalled. However, if I look at the control panel-> device-> ECS Manager-> Intel(r) WiFi Link 5300 AGN-> (right click) properties-> tab driver, then I see that the device is turned on.

  I should add that the original driver worked perfectly and now it is very annoying that I can't use WiFi at all. Please, give me help how to solve this problem. I tried to visit the pages of Lenovo Support & downloads and download other X 301 Vista 64-bit driver, but the system tells me that I have the latest version of the driver and the driver has not been installed. Anyway, I don't know what the right solution or the pilot, so please help me. I am very frustrated because I downloaded everthing officially using the given by Lenovo ThinkVantage tool. I thought that these drivers offered by this tool have been tested.

  change note:-removed S/N for the safety of the customer

  
  

• Satellite M60 and the display driver installation

  Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
  Shorten one or both of the limit specified below and try again"! that to me?

  Hello!

  This looks like your username to long and the path of files extracted more than 88 characters.
  I think you should change your username or try with another account to update the driver, for example the admin account.

  If it doesn't work try to download the driver again.

  I hope this works, but you can give us feedback, what's going on.

  Good bye

• Satellite C660 - 10 H - driver Linux for the WiFi card

  Hello.
  I have a Satellite C660 - 10H, and the WiFi does not work.
  With the lspci command $ tells me that my driver is RTL8876. I installed a RTL8892CE but works well. It disconnects all the time.

  Any advice?
  Thank you

  Hi lucapepile,

  The problem is that on the Web from Toshiba site are alone Windows disks because Linux isn't taken in charge

  I think that you should look for help on some Linux forums. Maybe they can help you find a suitable driver for your wireless card. Wireless network adapters are used in many different laptops so I put t think that it s a Toshiba linked correctly.

  Finally and most importantly, I found this:
  [You know a useful site for Linux on PC support? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

• Satellite L300D will not recognize USB drive, except if the WIFI is disabled

  I have a venerable L300D Satellite under Vista SP2. I also have a Fujitsu 40 GB SATA HDD of my old laptop in a USB2.0 caddy, with double USB plugs to require more current.

  I can sign in successfully caddy USB to my laptop Windows 7 via a simple USB port on a USB 2.0 so I know it works.

  On the Satellite L300D, it implements the Generic USB drive in Device Manager, but does not record the 2 disk partitions in the storage of files in Windows Explorer. In fact when you try and expand the COMPUTER in the Explorer it times out.

  I noticed that the WLAN (Realtek TL8187B) is on the same USB 2.0 controller, so I disabled it. It turned off my wireless, but immediately the Windows Explorer was shot in life and I could access partitions (D:, and G :) may even run the check disk (no failures) and Defrag. As soon as I turn ON the WLAN driver disc fails to register.

  I've updated the Realtek drivers on the Toshiba web site but I want a solution that allows me to use the disc AND the WIFI network at the same time.

  Someone at - it ideas?

  Hello Colin

  Have you started using your laptop with the original version of Vista that you got with your laptop?

  I use Toshiba laptops for a long time now but I've never noticed this issue although I use external hard drives and USB keys quite often.
  Since when did you notice this kind of behavior? To be honest, I can't imagine that this problem persists since the day where we as original recovery image is tested and something like that should not happen. Maybe some updates may be responsible for this.

  Trying to remove driver WLAN, reinstall the chipset driver and reinstall WLAN driver. After doing this test he has once again please and send feedback.

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• Cannot install the driver for the wifi adapter

  Hi, I have a problem with installing adapter driver WiFi on hp pavilion dv6-3225dx, any driver that I use, I get an error that the driver was not installed correctly.  The wifi on the keyboard light does not turn off, light is a steady orange.  Help, please

  I decided to open the new laptop just to be sure and low and here is the wlan was a bit out of place, I set in and now its recognized, I'm going to have a drink now, thanks for your help

• Help! Lenovo Z470 Cant detect the wifi routers. :(

  Hello guys! I just purchased a lenovo idea z470, and I had difficulties to detect wifi routers, the one I have at home and at work, when I plug in the calbe has no problem, but if I try to use the wifi nothing comes out. please help.

  Thanks in advance.

  by pressing fn + f5 wireless active?

• the driver installation failed after startup

  Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installation failed: could not find the device for this driver. Please help me thanks in advance

  To install the Conexant audio driver, you must first install the MS UAA.

   

  MS-UAA, ici

   

   OR > MS UAA for XP SP3, ici

  For assistance please post MODEL full and P/N of your serial number on the bottom of the laptop.

   

    The localization model number

• Creating a program the evolutionary IVI driver installation problems

  I have problems when you try to create an upgrade for an IVI driver installation.
  I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
  1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

  My problem is the following:

  • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
  • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
    "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

  I noticed the things so far:

  • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
  • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
    What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
    According to the results of this audit, the installation process is abandoned.

  If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
  Maybe I put just an evil version information field, but I do not know that which (if any)...

  Advice would be greatly appreciated!

  I seem to have found a solution:

  The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

  So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

  Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

  This can be accomplished using the Orca tool included in the Windows SDK.