The worst community

Similar Questions

• (Redirected) The worst experience with customer

  I've been buying Dell computers among more than 15 years for me and help my friends for more than 15 years.  I would say that I've spent more than $20 K with them.  The most recent experience I had with Dell is the worst and I will no longer consider them as a source.  Here is a chronology of the events:

  11 August 2014: place an order for the laptop computer Inspiron 17R for a customer.

  August 14, 2014: received the laptop.  I tried to turn on the laptop.  It feeds for 5 seconds and stops (not "Dell" screen).  I checked all cables power, power supply and plug different.  I was very disappointed because the customer needs of the computer by the weekend.

  August 15, 2014: at 10:00, I called Dell to try and get a replacement via 800-822-8965 computer.  Dell said that they need the computer in front of me to help diagnose the problem.  I told them that this computer does not stay on.  They indicated that they me to run the installation program and a diagnostic problem.  I told them not possible because the computer does not stay on.  I said at this point, I want to send it to dell and have dell ship me a new.  They asked me to call 800-624-9896.  After you dial the #, they said they can't help me and asked me to call the # original (800-822-8965).  I have re-made the original # and they after me in good number of different departments, I need to call another # (800-624-9896).  I called the # asked and they have sent me everywhere in places (and repeating the problem each time).  He is now 6 hours later.  I retried the # more later in the evening and give all the information.  At this stage, they said that according to the information I gave them, it is not a Dell computer.  I said "(pas possible-j'ai obtenu l'ordinateur par l'intermédiaire de dell.com, a reçu avec un dell boîte avec l'ordinateur a un logo dell)."  I insisted to speak to a Manager.  Roy's came on the line and said that I can call 800-695-8133 day and next call and they would take care of her.

  August 16, 2014.  At 10:00, I called 800-695-8133, and they said that, because I want to exchange the phone, I need to call 800-822-8965 and they will refer me to a special division to have my computer fixed and that they are available during business hours only.

  At this point, I'm a bit fed up!  Why don't dell.com help me when I call during business hours to resolve the issue and rather me directions in all directions.  At this point, I want dell to take the laptop and give back me the money.  I will NEVER buy another computer from the new.

  Hi blee123,

  I'm sorry that you are having so many problems.

  Please repost this in the forum to support customer care.

  http://en.community.Dell.com/support-forums/customercare/

• (Redirected) DELL HAS THE WORST CUSTOMER SERVICE I HAVE EVER EXPERIENCED, AND IT IS THE ONLY WAY I COULD TELL THEM!

  DELL HAS THE WORST CUSTOMER SERVICE I HAVE EVER EXPERIENCED, AND IT IS THE ONLY WAY I COULD TELL THEM!

  MISSING MY ORDER AND 6 CABLES HOURS TAKE WITH PEOPLE WHO COULD NOT EVEN SPEAK ENGLISH, TRYING TO GET THEM.

  Better to post this thread in the Customer Care Forum here:

  http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

  Bev.

• The worst Customer Service

  Long story short, I would like to make a timeline, so that you can see how messed up you did gourmand to me.

  2-3 years, I got a used ps3 and it worked, it was one that you can play all the games of ps2 for ps1, long story short. they offered me a new ps3 (right WOOO!) for $100 $ turning mine. I said sure why not! It's great I grew up with Sony since the Ps1.

  7 last month or 8, could barely play ps3 cause I was in College full time, away from free time.

  I sit a day that the ps3 is upward, I ended up calling to see what is happening. They finished by telling me to format it, I did 3 times, same problem of gel ect. not really helped. When I called they told me this. "Oh you are out of warranty" I said ok, but I bought this brand new from you guys how can be like that? the person later told me the one that hurts the most... TADUM said 'No we sold you a refurbished PS3' I've never been so Livid. I decided to be profesional (I do service also good customer and never have I experience from this case, I thought that maybe it's just say be I should stop buying from them.)

  and here's the last number that all topped above all.

  Don't forget, I share this ps3 with my neighbore invades it and we play or he plays a versa, nether, less as the ps3 does not always leave my house. He was playing gta5 and Im sitting there watching that he decided to go to the store and buy himself the money for his character, (they CHARGED HIM twice) I called and explain what happened. He received his refund, (he paid with his card, you will understand why I say this and his character has the same name as that of his card. That means that it is his that no one can use it!)

  2 months or 1 month later, Im read description LBp3 game pre-order, I have never anything the digital pre-order copy I don't think that its worth, I buy games on the PSN store. Long story short the ps3 glitched out of the store to purchase and buy the game, I called immediately the next day because it was already noon. They me denied 2 times and had the biggest, worst customer service ever, I was called a liar, and it of not his fault, I bought this in error. When I do not accept that to buy it!.

  Here's the last convo I had with a representative. Today 08/09/14 just before I made this account to complain about this service!

  I deleted our names for protection of course.

  Rep: How can I help you?

  Hi SIM. Sorry to hear about your experience. In so that we can help you, please post your concern on the PlayStation Community! I don't know what they would appreciate. Their site is at http://us.playstation.com/community/. I hope this helps you. Thank you, Charlie

• Of my horizontal scrollbar disappeared, and none of the published community solutions working - help?

  My scroll down bar (left-right) disappeared, and none of the solutions of the working community to bring it back. I tried the ' topic: Configure "approach, verified that I have the latest Firefox, tried the Safe Mode, rebooted several times, etc.

  Help would be very appreciated!

  Can you still see the search bar if you open this bar (Ctrl + F)?

  It is possible that the screen is too high and the bar scroll to fall down.

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I received an email from the "Apple community". Is it really of Apple?

  Today I got an email from the "Apple community" saying "some of your profile information are missing.  Any information provided will be used in accordance with the privacy policy apply.  Please sign in and continue. "Thank you, Apple Community Center.

  Is it really of Apple?  The address is: Apple, 5670 Wilshire Blvd., LA, CA 90036 US

  It's a new, privacy policy apply.

• Why is updated to the WORST update today, most excruciating history of Firefox?

  Auto update this morning

  Since then, I feel the worst, slow, excruciating experience ever

  I use Firefox since the beginning - how many years is it? This is my favorite - browser err, was...

  I'm about to switch to Chrome, if I have to wait about 30 seconds for the pages to load

  Gmail keeps complaining about a shutdown script

  Help, please!

  I've identified the problem!

  I've disabled all extensions and plugins, then works them both.

  The culprit is AN extension: Firebug 1.11.3

  With everything on except Firebug, my performance on this system is OK

  In addition, when I activate Firebug, performance goes in the toilet

  Disable Firebug and the performance is OK again.

  Oddly enough, my home PC XP finally updated for Firefox v21 yesterday office. This, also, use Firebug.

  I have had no adverse performance on this another XP PC

  Please, advise.

  Thank you

• We're sorry, but something wrong Mozilla Firefox 500 error message when you try to connect to the intuit community

  I have been going back and back, questions and answers about the Intuit community without any problem. Now, since Friday night, I not was able to get back in. I get the error message 500 of Mozilla. I use Windows 7 and I have Firefox installed 19.0.2. Everything was fine until Friday night. I don't know what has changed.

  The problem occurs only after you open the page, click Sign In, fill out the form, then click the Sign In button blue?

  http://community.Intuit.com/

  Does make a difference if you use a secure connection?

  https://community.Intuit.com/

• HP envy m6 1103tx: I can't update my sound driver beats I am experencing the worst audio

  Mr President.

  I'm the worst audio exprencing, I paid you must to my laptop only for sound quality, but I can't get the update, even the low version of the computers laptops hp which my use refugees get good sounds, please send me bat current driver version audio update.my is 6.10.6418.0 which is updated on 2012.07.24, please help me solve this problem

  Hello:

  See if installing this driver solves the problem...

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp63555.exe

  Exit the: 30 September 2013

  Version 6.10.6491.0 Rev.

• need an exact model of the PCI communications controller driver

  Mr President.

  my model is G62 B39 SE

  WINDOWS 7

  64-BIT

  HARWARE ID IS

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Please I need an accurate model of the PCI communications controller driver

  Hello

  It's a system driver wise called "Intel Management Engine Interface (MEI) ' as mentioned in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5040732 & sw_lang =

  Please download the exe on the link above and install on your machine.

  Kind regards.

• Satellite L600: How can I turn off the Wireless Communication switch?

  Hello! Would be very grateful for any help... After struggling for 3 months that I finally registered here in the hope of getting help.

  I have a new Satellite L600 / Win7 Home Premium.
  My question is that I don't know where the wireless switch is to turn off COMPLETELY wireless.

  Whenever I start the wireless (orange) light turns on automatically.
  I have to wait until finish and turn off manually by Fn + F8.

  When I opened ConfigFree (or doctor of connectivity), the diagnosis on the left bottom says [STATUS"switch of Wireless Communication: WE]
  This tells me that the main switch is somehow always THERE.

  Twice I called Toshiba and they couldn't find it either.
  They said that the new versions of the BIOS does not...? And for this model, there is no physical switch built on the PC itself.

  I have looked everywhere and did the following:

  (1) disable the adapter in Device Manager.
  (2) in HWSetup, where there used to be an option to click on the switch wireless off, he's gone.
  (3) I went into the BIOS setup and could find nothing remotely related to without wireless/bluetooth to switch.

  I wonder why there is a wireless laptop with light permanently? But if it is enabled, there must be a way to turn it off. Press Fn + F8 every time at startup is not a long-term solution because the risk is that I'll forget someday).

  My last laptop was hacked until it's an absolute priority that I know how to disable all wireless functions. So even if I have to do through the commands, I'll try it. In addition, I do not know if anyone else experience the same thing with this model, or is it a default of my particular PC?

  Any help or even experience will be much appreciated, thank you.

  I disabled the card in the Device Manager.

  When I opened ConfigFree, connectivity doctor tells me the Wireless Communication switch: WE

  > My question is that I cannot find where the wireless switch is to turn off COMPLETELY wireless.

  There is no hardware switch that would allow to enable or disable the WiFi network.
  WLan can be turned on and off using the FN + F8 key combination.

  > When I open ConfigFree (or doctor of connectivity), the diagnosis on the left bottom says STATUS\ ' Wireless Communication switch: on it tells me the main switch is somehow always WE.

  What is the status of the WLAN if you check in network connections?
  The WiFi network is always on?
  If not then the WiFi connection turned off and I wouldn't be worried by the fact that ConfigFree says that it s THERE.

  Of course, you can disable the wireless network adapter in Device Manager. Just mark the Wlan card under network adapters and turn off your device. But believe me; It s enough to do using FN + F8 ;)

• The USRP CSD requires the LabVIEW Communications?

  I recently installed LabVIEW 2013 on my machine, as well as a whole bunch of toolboxes:

  LabVIEW English 2013
  VI Package Manager
  Module LabVIEW Control Design and Simulation 2013
  2013 LabVIEW Datalogging and Supervisory Control Module
  2013 LabVIEW MathScript RT Module
  NI LabVIEW 2013 LEGO (R) MINDSTORMS (R) NXT Module (in English)
  Module OR Vision Development 2013
  Module LabVIEW FPGA of 2013 (English)
  Xilinx toolchain 14.4
  Module time real LabVIEW 2013 (English)
  2013 LabVIEW Touch Panel module
  2013 LabVIEW Robotics module
  Software OR SignalExpress 2013
  LabVIEW Sound and Vibration Measurement Suite 2013
  Module LabVIEW Statechart of the 2013
  LabVIEW 2013 for myRIO Module
  Toolkit OR run real time Trace 2013
  2013 LabVIEW System Identification Toolkit
  LabVIEW Toolkit 2013 Digital Filter Design
  4.3.4 for LabVIEW Modulation Toolkit
  2013 LabVIEW VI Analyzer Toolkit
  2013 LabVIEW Database Connectivity Toolkit
  2013 LabVIEW Report Generation Toolkit for Microsoft Office
  LabVIEW Spectral Measurements Toolkit 2.6.4
  2013 LabVIEW Advanced signal processing Toolkit
  LabVIEW 2013 PID and Fuzzy Logic Toolkit
  Kit filter LabVIEW Adaptive, 2013
  Toolkit LabVIEW DataFinder of the 2013
  2013 LabVIEW Desktop Execution Trace Toolkit
  LabVIEW 2013 Multicore analysis and matrices hollow Toolkit
  LabVIEW 2013 power electric Suite
  Toolkit LabVIEW 2013 GPU analysis
  Biomedical Toolkit LabVIEW 2013
  Module LabVIEW 2013 OR SoftMotion
  NEITHER Motion Assistant 2013
  NEITHER Vision Builder for Automated Inspection 2012 SP1
  OR DIAdem Professional 2012 SP1 (English)
  LabWindows/CVI 2013 development system
  Module time real LabWindows/CVI 2013
  LabWindows/CVI Spectral Measurements Toolkit 2.6.4
  Spectral measures of LabWindows/CVI DURATION 2.6.4
  LabWindows/CVI SQL Toolkit 2.2
  Toolkit for processing Signal of LabWindows/CVI 7.0.2
  LabWindows/CVI PID Control Toolkit 2.1
  Execution of LabWindows/CVI Profiler 1.0
  Measurement Studio Enterprise Edition for Visual Studio 2012 2013
  General safety NI Patch 2nd quarter of 2013
  NEITHER TestStand 2013
  NEITHER ELVISmx 4.5
  NOR-DAQmx 9.7.5
  Xilinx 10.1 Compilation tools (requires the build tools additional Xilinx DVD)
  Device drivers or - February 2013

  I tried to follow this tutorial with the USRP 2932, coming soon, but I found out later that I have seem to have none of the LabVIEW Communications. No not those who prevent me from using the USRP radio? If not, then is there any restrictions on what I can do with the radio without communication?

  Hi BreadLB,

  The link to the tutorial you posted is based on LabVIEW Communications System Design Suite, a new software environment designed to accelerate the prototyping of the algorithm and stable air.  It is a completely separate and independent of LabVIEW environment.  See my post here for more details.  You can also download a free 30 day trial copy here.  Your hardware is supported with LabVIEW and LabVIEW Communications.

  The 2932 NOR is a network based USRP, and there a small on-board FPGA.  For this reason, the FPGA on that specific product is not a target of LabVIEW FPGA.  The NI 294 x / 5 x family has a large Kintex 7 FPGA and can be programmed using LabVIEW FPGA and LabVIEW Communications, as in the tutorial you posted.  The 2932 OR can be used with your host PC and LabVIEW for a variety of applications.  Unfortunately the tutorial that you have linked to your post requires the NI 294 x / 5 x hardware and Communications of LabVIEW.  If you have questions about a specific application for your 2932, please post more details and we would be happy to help you.

• I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Envy Touchsmart 15j018tx: THE WORST NETWORK EVER 15 ENVY TOUCHSMART HP

  THE WORST INTERNET WIFI CONNECTION ISSUES FRICKIN!

  It's really crazy for such mobile high-end!

  It continues poor wifi signal and keep disconnection for some reason any!

  It drives me crazy! DIFFICULTY PLEASE<-- solution="" please="" hp!!!="" dont="" make="" me="" dissapointed="" more="" for="" buying="" this="">

  I agree that you should also check your router connection. try to reset and check the protocol settings WPA - WPA2. I read in other forums that this might cause problems to windows8, so google it.

  As your computer, was there all the time it worked normally? When you bought first didi you change something?

  Try this solution from another thread. (http://h30434.www3.hp.com/t5/Notebook-Hardware/Internal-Power-Error-upgrading-Windows-10/m-p/5168771#M190265). They use it for problems with graphics drivers, but use it to your wireless drivers.  After you return to a normal startup, enter the Device Manager and reinstall the drivers that you uninstalled.  It's something like a clean install, so try.