There is no guide on the development of ucm components?

Similar Questions

• Quick Start Guide for the development of AIR on iOS?

  Hello

  Is there as a starter guide for the development of AIR for iOS? I am looking for a sort of tutorial that tells me what to install and how to create a Hello World game on iOS (iPhone and iPad).

  Thank you

  http://active.tutsplus.com/tutorials/mobile/Flash-for-iPhone/

• Is there a troubleshooting guide for the connection of DSC-RX100M2 WiFi?

  Try to send a picture to my computer via the WiFi does not work.

  Of playback mode, when I select the menu option 'Send to the computer', the camera connects to the WiFi access point and then, is never able to connect to the computer...

  Name/group of computer job information been defined previously in the camera via USB with the help of PlayMemories House.

  After expire tries to connect to the computer, the reports of the camera that he was able to connect to the access point but not can connect to the computer.

  I already tried things

  (Please read this instead to suggest that I have try this... again)

  • I tried viewing pictures on a TV which is on the same network... and that works.
  • I tried to send photos to a "smart phone" (actually an android Tablet) connected to the same network... and it works.
  • I do not use the Windows Firewall so that the changes you home PlayMemories try to the firewall configuration Windows are not relevant.  So, I added some firewall rules for firewall, I use (Comodo) to allow incoming traffic on UDP and TCP protocols on ports 1900 and 2869 (as suggested in another post on this forum titled "Sony WX200 cannot connect to the computer via wifi".  I know it's another camera, but I guess the end of PlayMemories of the connection must use the same ports, etc..
  • I tried to connect with the products of firewall (Comodo) and the Windows Firewall completely disabled both.
  • I tried to restart the PMBDeviceInfoProvider service after the firewall rules have been added and then tried to connect the camera again, but always failed to connect.
  • I tried to restart the PMBDeviceInfoProvider service, while all products of firewalls have been disabled and then tried to connect the camera again, but always failed to connect.
  • I have temporarily stops the service of PMBDeviceInfoProvider and a simple http/web server (tiny Java Web Server - http://tjws.sourceforge.net/) port 2869 on the computer where PlayMemories Home is installed.  Then, using a web browser on another computer that is connected to the same WiFi access point that the RX100M2 camera, I was able to connect and get the default page of the web server.  If failure of the camera of the connection does not appear to be caused by a TCP connection failure and 2869 port is not blocked by the firewall.

  It does not appear to be any technical documentation or correct this information available about how the camera identifies and finds the computer, or what else can stop him from connect.  I speculate that it uses a UDP (port 1900) "broadcasting" of the PMBDeviceInfoProvider to allow the camera to find the computer.  I suspect that the "cannot connect" problem could be related to whether the wireless access point allows the UDP packets from the WiFi "side" of the wired/ethernet 'Coast' but I have no way to test or prove that, or even enough Sony documentation on the issue of whether it is a reasonable thing to try troubleshooting.

  If it gives anyone else having the same problem any ideas that lead to discovery, where it fails, please share.  If there is someone at Sony who knows what might be the cause of failure, please answer.

  Another thing I noticed is that a MTP IP device appears in Device Manager when you attempt to connect the camera, but it was not the name of camera model. I tried to uninstall the generic driver from "Device IP DPW" (right click and uninstall in Device Manager). The next time I tried to connect the camera, Windows RE-load the driver and now, it appears as DSC-RX100M2. So, I have evidence that the camera is now to find the computer, but it is yet to transfer all the files from the camera.

• can anyone guide for after the development of a plugin effects?

  Can anyone guide for after the development of a plugin effects?

  His strong to find directions to make a.

  Wrote scripts in script extended with the support of the community, adobe and online tutorials.

  
  

  But I know that Plugin development is not an easy task, but my curiosity is killing me if I don't try. Can someone please guide.
  

  I downloaded the SDK CC 2015. There are lots of examples, model Skelton, CEAP folder. All Visual studio solutions.

  When I try to open it, it says no loaded project that some components are missing, reinstall using microsoft visual studio c++ 2015.

  Can someone just to share a very small brief step by step from the beginning to the end.?

  .Aex format encoding?

  Thank you

  in the project settings, you can change the directory 'exit' to anywhere where

  you would like to.

  Ideally, you will set it to EI, or another folder plug-in directory

  in which you can create a shortcut to the plugin directory of the AE.

  in this way, you can build directly in a folder AE readings and debug your

  plugin.

  

• Is Guide to the forms/4GL developers of the developer 10g obsolete?

  Hello
  
  Is Guide to the forms/4GL developers of the developer 10g obsolete?
  Because there are examples such as
  To the custom help ADF Page Lifecycle to call a Backing Bean onPageLoad
  Method
  
  I can't find in the 11g docs
  
  Thank you.
  
  Published by: juancarlosreyesp on October 8, 2012 10:41

  Hello
  many things Yes.
  http://docs.Oracle.com/CD/E23943_01/Web.1111/b31973/TOC.htm
  http://docs.Oracle.com/CD/E23943_01/Web.1111/b31974/TOC.htm

• Contradiction in the developer's Guide of what is instance?

  Hello!

  Page 16 of developer guide it is said that the structure of the URL is following

  Protocol: [//host] [: port] [INSTANCENAME] /appname/

  But earlier on this page, he was told that

  The NetConnection class to connect a client to an instance of the application on the server.

  and gave an example

  var nc:NetConnection = new NetConnection();

  NC. Connect ("rtmp://localhost/HelloServer");

  When the connect directive contains no instance name.

  So, how do they relate? The instance name is just omitted in example feel _definst_?

  Is it possible to write

  NC. Connect ("rtmp://localhost/HelloServer/room1");

  ?

  Thank you.

  Hello

  Your understanding is almost correct and there is no contradiction about the instance and the URL in the developer's guide.

  As he said, always connect to the network to connect to an instance of an application, this instance can be explicitly mentioned (you want to add room1) or if it is not given, FMS uses a default instance with identity _definst_ for all its purposes. Do not add this _definst_ in your connection URL or elsewhere, but its what the connection is.

  If you see the FMS Management console, you can observe clearly which body is to get connections.

  Thus, the Protocol: [//host] [: port] [INSTANCENAME] /appname/ is complete with the explicit instance name in the URL.

  The NetConnection class connects a client to an instance of the application on the server. : Correct

  NC. Connect ("rtmp://localhost/HelloServer"); It connects to _definst_

  NC. Connect ("rtmp://localhost/HelloServer/room1"); possible and connected to the instance room1.

  It will be useful. Thank you!

• Is there a manual or a Guide to the user for the Acer Chromebook?

  Is there a manual or a Guide to the user for the Acer Chromebook?

  My Chromebook did not come with one.

  I would like a link to a page with a User Guide or manual for the Acer Chromebook user.

  Thanks for your help.

  Hello..

  http://global-download.Acer.com/GDFiles/document/QuickStartGuide/QuickStartGuide_Acer_01.01.02_A_A.p...

  LC = en & BC = ACER & SC = PA_6

  Click on the link above to download the Chromebook user guide.

  http://www.chromestory.com/100_Chrome_ChromeOS_And_ChromeBook_Tips_Ebook.PDF

  Click the link above for the Chromebook Ebook

  Concerning

• Code sample NFC in the development guide does not

  Hello.

  I just wrote a quick Hello world app for reading and writing NDEF records, based on the code provided in the development Guide.

  I use the MiFare Ultralight tags. However, it does not work.

  I could write NDEF only once during the tests, but after that I was unable to write the tags again or delete them using my application. However, the application of NFC demo included with the BB is able to write.

  Thinking that the tag doesn't have enough space to store the nested NDEF message of the dev guide, I changed the code (reader and writer) use only a title and url records, without success.

  I also tried to change the parameter listener of NDEFRecord.TNF_WELL_KNOW to NDEFRecord.TNF_ANY, so read the labels already written with the demo included in the BB application, but it has no effect. I have read that sporadically with the two types, but most of the time the BB does not detect everything just the tag.

  Now, I know that:

  • The tag is readable and writable, because I read and written in the plain format ISO-14443-3 and the BB demo readings and Scripture in NDEF.
  • The tag is unlocked and able NDEF (inspected a target using DetectionListener object)
  • A few times I was able to write an NDEF tag, but then it is not readable by my application nor by BB demo group.
  • I have read several times, but most of the time it fails.
  • Tried to erase the label before writing, but does not work.

  I use exactly the same code that appears in the development guide and a BB 9360.

  Finally, I solved the problem. It turns out that my tags (Mifare Ultralight) have only 64 bytes of total storage, so the example NDEFMessage in the development Guide (root NDEF Sp record with two folders nested inside) is too big to be stored when the text exceeds a few words.

  With regard to the NDEFTagConnection class, I found that the erase method throws exceptions, and that the append method is problematic. The only method that worked for me was the write method (who wrote the entire tag).

• I bought Adobe Lightroom 5 a month ago. For no reason, the base Panel has disappeared in the development manual. is there a problem with Lightroom, I see that there are similar topics on the internet

  I buy 5 Lightroom a month ago. No apparent reason, the base in the develop module Panel disappeared. I note that there are several references to similar problems on the internet. I have a problem with Lightroom of supplements. Can someone help me solve this problem please?

  Right-click on the header of one of the other panels and check Basic menu drop-down.

• Is there a way to change the color of some of the guides?

  I need color code my guides, but the only option that I can find to change the color of the guide change all of them.  Is there a way to change the color of some guides only and leave the rest alone?

  Thank you!

  I think Bob Peru means to draw lines in place of guides.

  Adobe photoshop - how to set a different color to guides(Ai,Ps,Id,Fw)? -Graphic design change battery

• Is there a way to remove the guides inbetween work plans?

  For example, I have a series of guides on all 10 horizontal work plans. I need two more in a vertical format, but all the guides on the horizontal lead.

  Thank you!

  Thank you all!

  I must of not been clear in my question, I want to say was is there a way to keep the guides for some plans of work and remove the guides where I don't want them.

  However, I found the answer to my question. I just create guides for the artboard itself which does not cross the limits of the artboard. Simply clicking the artboard and the drug guide.

  Hope that makes sense for those who want else knows how to do (other than objects, and then creating) guides for a work plan.

  My problem was to have several arboard forms crossing in the guides of other work plans.

  Thank you!

• How is there is some noise in the library module, while there is none in the develop module?

  Straight, simple like this:

  I shoot with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

  I airbrushed a picture and I pushed some limitations while using the tool brush on some sections of the image.

  As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo.

  How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

  What to trust? How can we work with divergence like that?

  If anyone noticed something similar, I would really like your opinion on this.

  > I'm shooting with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

  You have been deceived by the marketing. All cameras, even a 5DmkII a noise at each ISO setting. Most of the noise from digital in modern cameras capture is caused by photon counting statistics (i.e. photographed fish noise or noise) and in small part by the noise of the amplifier. This means that any pixel noise is practically equal to the square root of the number of photons counted by the pixel. "Canna change the laws of physics Cap ' n."

  > I've airbrushed image and I pushed some limitations while using the tool brush on some sections of the image. As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo. How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

  Development module working on a small subset of the raw data for its display, especially when zoomed out to go up or fill. This is to ensure that cursors are sensitive and you don't have to wait for a few seconds each time you touch a slider. You can only trust the preview to establish in what respect the sharpness and noise when zoomed to 1:1 or higher because of this and this means you must be able to optimize the sharpness and noise while the zoom 1:1 reduction. This is necessary in all cases that capture sharpening and noise reduction work at the pixel level. In the library, the preview is a JPEG, pronounced on the raw file using full raw. Also note that if you brush positive clarity, one tends to amplify really no noise in the image, so, be careful and check regularly at 1:1.

  > What to trust? How can we work with divergence like that?

  1:1 Preview to the point or the glimpse of the library if you are interested in the features of sharpness and noise.

  > If anyone noticed something similar, I would really like your opinion on this.

  You are not the first to see it for sure. Usually, it doesn't matter except when you push your images really hard.

• Developer's Guide to the web - like shapes...

  Hello
  Y at - it guide to any developer for creating/modifing web - like shapes for applications such as Sourcing, supply e.t.c i... ???
  
  Note: I use EBS 11.5.10 and DB 10 g v.2
  
  Thank you
  SIM

  SIM,

  I found a precious doc: 269138.1...

  The same guide comes with the patch that you download from the first document referenced in my previous answer (according to the patches ATG group) that you are).

  Kind regards
  Hussein

• Will there be a new commissioning Guide in the works?

  Hi, I'm looking for a commissioning guide that is updated.  The new Jabber Cisco telepresence admin guide asks the reader to find in my version of TMS Provisioning Deployment Guide.  Now that I've installed Extensions commissioning, I can't find a guide that works.  Maybe I missed it.

  Darren

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/tmspe/Install_Guide/Cisco_TMSPE_Deployment_Guide_1-0.PDF

• Is there a way to get the list of hosts and its groups of belonging to the vCenter folder level in 5.5 web vsphere client plugin development?

  Hello

  I need to get the list of all hosts and its groups of belonging to the vcenter folder level.

  1. I created a view giving the extension point: vsphere.core.folder.monitorViews.

  2. After this step, I wrote the constraint as in my class of mediator,

  var ListConstraint:Constraint =

  QuerySpecUtil.createConstraintForRelationship ( _contextObject, 'childEntity');

  I was expecting a list of all child entities such as hosts, dc, cluster... But I have only the immediate child object which is only the Datacenter as my result.

  Is it possible to get all hosts and vCenter folder level Clusters because I need the entire list to vCenter (highest level).

  Other info:
  

  Object file has only two properties:

  1 childEntity - list of entities

  2 childType in-kind folder ('Virtual Machine', 'Data center'...)

  Is it possible to write a constraint specifying which list of childEntities I need using childType in.

  Example: Make Me childEntities that has a 'Host' and 'Cluster' childType but childType in doesn't have these two types.

  In addition, at this level, I could see the 'Associated objects' tab which has all the information I need, such as Clusters and Cluster tab hosts and host tab respectively.

  So, I think its possible to get this list to vCenter folder level.

  I have attached a screenshot representing the need. Kindly ignore the Conventions of naming in there since I edited the example comes with the sdk program.

  
  

  Query:

  1. How can I get the host and Cluster (table of relationship) list to vCenter folder level or even at the level of the vise.global.view?

  2. once I get this list, is it possible for me to manipulate that list and send the new list to IU?

  3. is there another way to do the same thing without the help of model classes and mediator?
  

  
  

  Pointers to this will be very useful.
  

  It is not possible to obtain all hosts a folder specific vCenter from a single query Data Manager.  You need to get the list of centers of data first and then get a list of data center hosts.

  It is best to make these repeated requests to the java level and return only the list that you want to the user interface.

  You can get all the objects in the host of the system with a simple query using a constraint with targetType = 'HostSystem', but you will need to eliminate those from other vCenter servers.  See how this chassis example queries all hosts the Java later in the getHosts() method: samples/chassis-app/chassisRackVSphere-service/src/main/java/com/vmware/samples/chassisRackVSphere/ChassisRackVSphereDataAdapter.java

  Another option is to use the vSphere Web Services SDK to browse vCenter. See the vSphere management forum for help on these APIs.  See this plugin of the sample using this SDK

  samples/vsphereviews/vsphere-wssdk-provider/src/main/java/com/vmware/samples/wssdkprovider/VmDataProviderImpl.java