Thin Provisioning does not work or unable to find space?

Similar Questions

• Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

  original title: automatic update does not work. Unable to load Windows 7 or SP2.

  XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

  Hello

   

  
  1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?

  2. you also try to install Windows 7?

  
  Method 1.
  Run Disk Cleanup and disable the security software and then try to install the same and check.
  See the article below for disk cleanup:
  http://support.Microsoft.com/kb/310312

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.

   

  Also, it is recommended to install the Windows XP service pack 3. Reference:

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Eraser 6 does not work on my unused disk space. It is said that it doesn't have the necessary permissions

  Gum does not work on my unused disk space. It is said that it doesn't have the required permissions. I tried running as admin as troubleshooting told me, but it still does not work? What I am doing wrong.

  The reason why it is not working is that even if you close the gum and reopen it as a Director he is still a running process (which was not stop when you closed the gum) in the background without administrator rights.

  The solution is to ctrl-alt - del-> windows-> processes Task Manager.

  Kill the process called 'eraser.exe', and then you restart gum as an administrator.

  Thus, the background process will win also rights administrator.

  It worked for me :)

• IOM-Exchange Provisioning does not work after upgradation to 11.1.1.6.0

  Hi Experts,

  Need your help to solve the issue of implementation of the exchange connector.

  We upgraded the connector to the latest version 11.1.1.6.0 of 11.1.1.5.0 and applied the patch 18310438 for troubleshooting performance issues.

  After installation, exchange Setup does not work, the statistics remain in readiness, asking for your help to solve this problem.

  

  The newspaper of the server connector that we get the error
  
  DateTime = 2014-03-27 T 05: 09:43.0467023Z
  ConnectorServer.exe error: 0: System.TypeLoadException: could not load type 'System.Management.Automation.Runspaces.InitialSessionState' from assembly 'System.Management.Automation, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = 31bf3856ad364e35'.
  to Org.IdentityConnectors.Exchange.LocalRunspaceInstance.InitRunSpace (component snap snap)
  to Org.IdentityConnectors.Exchange.LocalRunspaceInstance... ctor (component snap snap, ConnectorMessages messageCatalog)
  at Org.IdentityConnectors.Exchange.RunspaceInstanceFactory.Create (ExchangeConfiguration config)
  at Org.IdentityConnectors.Exchange.Service.AbstractPowerShellService.CreateRunspace)
  to Org.IdentityConnectors.Exchange.Service.AbstractPowerShellService.Init (Configuration configuration)
  to Org.IdentityConnectors.Exchange.LocalRunspacePowershellImpl.Init (Configuration configuration)
  to Org.IdentityConnectors.Exchange.ExchangeConnector.Init (Configuration configuration)
  to Org.IdentityConnectors.Framework.Impl.Api.Local.ConnectorPoolManager.ConnectorPoolHandler.NewObject () in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocal.cs:line 108
  to Org.IdentityConnectors.Framework.Impl.Api.Local.ObjectPool'1.BorrowObjectNoTest () in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocal.cs:line 1041
  to Org.IdentityConnectors.Framework.Impl.Api.Local.ObjectPool'1.BorrowObject () in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocal.cs:line 981
  at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke (object proxy, method MethodInfo, Object [] args) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 178
  to ___proxy1. Schema()
  to Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest (request OperationRequest) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\Server.cs:line 609

  
  

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Details of the environment:

  
  

  1) IOM 11 GR 2 with BP 14 installed.

  2) Exchange 11.1.1.6.0 connector with patch 18310438

  
  Kind regards

  David
  

  Hello

  Error solved with the installation of the hotfix windows http://support.microsoft.com/kb/968930 on the connector server.

  Kind regards

  David

• Having the right password Adobe which does not work on cc can find no password to work CC. need to replace slice on the second computer

  Recent new laptop. CC not updated I have even on office and was on the previous laptop and can only be loaded on both devices.

  I work Adobe password which will not work on cc cannot find or find a dedicated password CC. In a traffic jam.

  If you're talking about being asked a password during installation or update, this is the password for your COMPUTER, from your operating system verifies that you are authorized to make changes

• Thin Provisioning does not not as expected

  In my esxi 4.0 test environment, I created a machine thin-provision xp-32 bit.

  Provisioning was assigned to 50 GB and is a minimal install of XP (just the operating system, patches, vmware tools) leaving 44.7 GB free.

  The flat file hower, looks like she is supplied thickness.

  I searched every thread here and see no similar problem.

  Am I missing something? I thought that the vmdk file should be around 5 GB to do, 50...

  I do not use vcenter, just download free esxi 4.0.

  

  / vmfs/volumes/4afd5954-40f87539-4DE3-001aa0a6e9a3/XP pro SP3-Virgin # ls - al

  drwxr-xr-x 1 root root 1400 19 Nov 12:40.

  drwxr-xr-t 1 root root 2240 19 Nov 12:14...

  -rw - 1 root root 53687091200 Nov 12:40 19 XP Pro SP3-Virgin - flat hard

  -rw - 1 root root 8684 19 Nov 12:40 XP Pro SP3 - Pristine.nvram

  -rw - 1 root root 506 18 Nov 17:55 XP Pro SP3 - Pristine.vmdk

  -rw - 1 root root 0 18 Nov 14:00 XP Pro SP3 - Pristine.vmsd

  -rwxr-xr-x 1 root root 2731 19 Nov 12:40 XP Pro SP3 - Pristine.vmx

  -rw - 1 root root 1866 18 Nov 17:55 XP Pro SP3 - Pristine.vmxf

  -rw - rr 1 root root 230154 19 Nov 12:13 1.log - vmware

  -rw - rr 1 root root 63177 19 Nov 12:40 vmware.log

  Hello hamm3r,.

  It is normal that you feel. A directory of the regular list will show 50 GB. You need to do a query (use of the drive/directory) with the following:

  -ah *.

  Which should show the actual size of the vmdk file. You can also watch free space of your data store in the VI client to check that it lines up with your expectations. I hope this helps.

  Don't forget to mark this "correct" answer or 'useful', if you found it useful (you'll also points).

  Kind regards

  Harley stagnate

• Satellite A300-1BZ - microphone does not work - need driver

  My microphone does not work & I can't find what kind it is to locate the pilot, can assits anybosy please?

  Hello

  The internal MIC is part of the webcam.
  Next to the sound driver, you will need to install the Chicony webcam software.

  You could test the microphone using the webcam software there is an option that allows you to record the audio stream

• Bootcamp does not work after disk utility

  Bootcamp windows 10 does not work after I have free space in disk utility

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 163,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 87.0 GB disk0s4

  Mohans-MacBook-Pro: ~ mohanpagadala$

  Mohans-MacBook-Pro: ~ list of cs mohanpagadala$ diskutil

  No logical volume group CoreStorage found

  Mohans-MacBook-Pro: ~ mohanpagadala$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 318634168 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  319043808 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  320313344 169920512 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Mohans-MacBook-Pro: ~ mohanpagadala$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-318634168] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [319043808-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [320313344-169920512]

  Mohans-MacBook-Pro: ~ mohanpagadala$

• screen saver does not work didn't sleep except when I click on sleep

  I have set up the screen saver after 2 minutes, but does not work. I also find "sleep" mode does not end defined time. the onl time it works, that's if I manually order the day before in the start menu. any suggestions?

  Hello

  What operating system is installed on the computer?

  Method 1: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  Method 2: Follow the below mentioned article:

  Windows 7 is not going to sleep:

  http://support.Microsoft.com/kb/976877

• updates installed live mail and now the spell checker does not work

  updates installed live mail and now the spell checker does not work

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hp14-d106tx official Wireless does not work

  Hello guys, today I bought Hp14-d106tx and I have install Windows 8.

  There was no driver DVD in the package, so I downloaded from

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=6967...

  Everything is fine, except the wireless driver

  There are 2 drivers wireless and they I installed them and show below.

  sp65029 - displays "sp65029.exe has stopped working".

  sp65428 - shows "this app can run on your PC.

  These are official driver downloaded from the site Web HP itself does not work, where do I find it?

  P.S. I have already installed the driver for the touchpad, but cannot find the way to disable automatically when the usb mouse is connected.

  Please help on this too.

  Hello

  I am from Thailand, and I posted in the thai site too,

  I tried the solution from here first,

  They suggested to download from the website of the Thailand of HP driver and it WORKS now.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=th&CC=th&DLC=th&sw_lang=&product=6967597#! N837 = & jumpid = ba_r329_hhoaffiliate & aid = 38293 & pbid = TnL5HPStwNw & aoid = 35252 & siteid = TnL5HPStwNw - tXx37tME_yPl.GBuzUOjAQ

  By the way, thank you very much.

• Find missing files does not work - what don't get me?

  I have had my photos stored on an external hard drive and upgraded to a bigger external drive. My husband has copied the files to the new drive. Now I can't access photos on the drive. I followed the steps to update the location of the pictures, but it does not work. I tried "find lack of pictures" and that does not work either. I follow the steps, but nothing happens.

  What I am doing wrong? I suspect, I'm missing a simple step, but I tried several times with both drives. I restarted LR. I restarted the computer. Nothing makes no difference.

  Thanks for any help or someone can give advice.

  Hi nannetter,

  Please connect the new external drive that contains all of the images, now open Lightroom and on the Library tab, update the location of the folder.

  See the link below.

  How to find missing photos in Photoshop Lightroom

  Note: Please make sure that copy you all images in the structure of the last hard drive to the new.

  Kind regards

  Mohit

• I need to re - install Photoshop and my serial number does not work?

  I need to re - install Photoshop and my serial number does not work?

  Quickly find your serial number

  Error "serial number is not valid for this product". Creative Suite

• Update error Code 8024200B & unable to update Wireless Keyboard 800 - keyboard does not work

  I have win7 pro 32-bit. Some updates fail.
  Currently updates for keyboard and mouse USB MS they return the error Code 8024200 B, for which I am unable to find an explanation.
  It is a problem that I bought a Wireless Desktop 800, and the keyboard does not work.
  I tested the material on my Win7 32 bit system and it works fine.
  The device is detected and enabled, etc. of thin batteries
  There is no drivers for 800 system, so I was hoping that the update would solve the problem, if I could install it.
  Any ideas on the error code, or how to solve the problem of keyboard?
  Thank you
  * Problem solved. These updates succeeded at the 5th attempt - and I was able to install 'Microsoft mouse & keyboard Centre' that got my keyboard working *.
  * I'll leave the rest of my response below in case it would be useful to all. **

  Thanks for the reply Fazil.

  1. There is no way to 'connect' from the keyboard to the computer. I insert the usb bluetooth dongle and it works for the mouse but not the keyboard.
  2. the updates are the two option, without numbers KB:
  -Other hardware - Microsoft Hardware Microsoft USB keyboard
  Mouse Microsoft USB - other hardware - Microsoft Hardware
  3 update error message for both simply put the Code 8024200 B. There seems to be no documentation for this error code.
  All security updates I ran & updated ok.
  I tried various things - stop programs anti-virus etc.
  4. This is the first time I tried to run the mouse wireless 800 & keyboard on this PC. I checked on my other laptop running exactly the same OS and that's fine, this isn't a hardware problem.
  I tried fixit, who found nothing wrong.
  In Device Manager, it shows the two devices (keyboard and mouse) twice, as on the other laptop.
  Bluetooth > open settings Options are set to "enabled" and in the material it shows "HP Integrated Bluetooth Module" and "Microsoft Bluetooth Enumerator.

• Firefox does not work because it says I must first shut it down. Further, I am unable to set my homepage to that required by me.

  I do not want my home page on a website. I am unable to get my home page desired back using the menu. Later, Mozilla does not work still. message Hey I get it should be closed in the first place. While the program is closed.

  For SEARCHQU see these messages:

  • https://support.Mozilla.com/en-us/questions/790833
  • https://support.Mozilla.com/en-us/questions/816181

  Go to control panel and remove the toolbar iLivid subsequently, you can change your home page in firefox

  Check and tell if its working.