ThinInstaller on Windows 10 (1511)

Similar Questions

• Restore the 38.4.0 Thunderbird address book Windows crashed 1511 Pro 10 backup computer NAS

  Hello: Unfortunately, my laptop crashed shortly after download and install Windows Update 1511, luckily I have a backup of NAS of the entire computer.

  I tried several methods to replace the original files of abook.wab & history.wab empty backup. The history.wab transfers showing collected addresses, but not my personal abook.wab address book file.

  I'm assuming that the procedures, I tried Thunderbird forums are for the transfer of the abook.wab are to transfer from one direct to another.

  Any help would be greatly appreciated.

  Thank you
  Mike

  Missing address book problem SOLVED!

  What I did:
  1 uninstalled Thunderbird
  2 remove the entire Thunderbird folder in the folder AppData from my PC
  3 made a clean files and registry CCleaner, PC rebooted and defragmented hard drive.
  4 recovered the entire Thunderbird folder from my NAS backup to my PC AppData folder
  5. re-installed Thunderbird, with my POP3 email addresses and the main address book presents
  6 remove all my POP3 e-mail accounts
  7 re-created all my accounts POP3 e-mail, such as IMAP accounts
  FACT

  Thank you for all your help christ1,
  Mike

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• Download the update for Windows 10 1511 error

  This morning my computer running windows 10) tried to download and install the updated version of windows 10 1511. "Shortly after that the download starts, I get the following error.

  Error ox80070570 update files are missing or having a problem KB3112908.

  I tried several times with the same result.

  My Touchsmart downloaded and installed the update without error.

  Hello

  Just for is of course, this Kb3116908 update?

  If this is the case, I got the same error with a couple of machines, but it seems to install Ok using the standalone installer from the Microsoft Update Catalog - see method 2 on the following link.  Note:  You will need to use Internet Explorer for this

  https://support.Microsoft.com/en-us/KB/3116908

  Kind regards

  DP - K

• Pavilion 13 x 360 a-010dx: Windows Version 1511 10 appearing not

  I Win10 x 64 currently has almost all the updates from Microsoft and works well. However, the last ' November Update "1511 is not appear. I also want to emphasize that it is the Home version and went from 8.1.

  I waited about 2 days now and there has been no '10586' or '1511' update available via Windows Update.

  Y at - it other ways to get the update? Should I wait longer? Or what I need to do a fresh install?

  Too bad. He appeared. Ignore this thread.

• Logon with fingerprints does not work after update of Windows 10 1511 threshold 2

  Connect to Windows with Windows 10 digital fingerprints and native integration of fingerprint worked well after a new install of Windows 10.

  However, yesterday I received the update of Windows 10 threshold 2 aka 1511 update. After this update, I can't connect with my fingerprint more. Removal of fingerprints and re-learning of the fingerprints with Windows Hello do not help. I tried different fingers and made very prudent recognition. But even when the windows screen lock and trying to connect with fingerprint reader doesn't fail. Windows says it's the footprint of evil and after 3 attempts, I need to enter the PIN to login.

  How can I reactivate fingerprint logon?

  Driver: 4.5.317.0 (PS Synaptics sensors), signed by Microsoft Windows Hardware Compatibility

  The problem was resolved when a new driver has been installed by running the tool "System Update" on my Thinkpad Lenovo. The driver is installed by the tool is "Common validity of fingerprint driver 4.5.503" (the Watch Windows Device Manager driver Synaptics FP sensors 4.5.503)

• problems with Windows Update 1511 iTunes

  Since the Windows 10 update around 1511 Windows I could not connect my iPad or iPhone to iTunes. The device is shown as connected in the Device Manager and I have updated the driver. I have also turned market Apple Mobile Device Support - costs of the device through the USB port, but does not appear in iTunes.

  You have any suggestions, and have you had this problem.

  Thanks in advance

  I also get error 0xE8000065

• HP ENVY 15 Notebook PC: Intel HD 4600 graphics driver has stopped responding and recovered after upgrade Windows 10 1511

  16/11/2015 Microsoft installed automatically 'upgrade of 1511' on my Windows laptop, 10.

  (This laptop has been previously successfully upgraded to window 8.1 for Windows 10 in August.)

  After the upgrade of 1511, I started to receive the following error while playing at Microsoft games:

  "Display driver stopped responding and has recovered - Display driver Intel HD Graphics driver for Windows 8 (R) stopped responding and has recovered."

  According to Device Manager, installed upgrading driver 10.18.15.4256 dated dated 15/07/2015.  I did a restore to 10.18.15.4248 as dated 29/06/2015.  This has not solved the problem.

  I checked HP Support Assistant and apply labeled sp72370 10.18.15.4248 Rev c dated 05/08/2015.  This has not solved the problem.

  I am committed service HP Smart friend and they are reapplied 10.18.15.4248 via Device Manager web search pilot.  It has installed Intel Driver Update Utility 2.2, but the newer driver has not been installed because of "driver installed by manfacturer (HP).

  HP support person recommended restore new to restore point before Microsoft «upgrade» 1511   I was not comfortable doing so, as 'upgrade' was an important update from Microsoft by using the same process as the initial migration of Windows 8.1 to Windows 10.  The customer can no longer control the timing of updates and upgrades are cumulative - is no longer able to choose specific updates.

  For now I'm wrong to live with this error condition, as seems to have an impact on games and not other normal operations.  My laptop there one provided by HP NVIDIA Geforce GT 740 M, which is Windows compliant 10 and seems to operate normally.  Some of my apps choose the Intel driver, and others choose the NVIDIA driver.  I don't know how applications choose which one to use.

  What a problem like this to be resolved when Microsoft control completely the update mechanism and HP doesn't seem to update drivers available via the HP Support on a basis common?

  I've disabled the Intel HD graphics driver and used the NVIDIA graphics driver for the game.  No problem.

  Disabling the driver Intel resulted in the reving fan at a higher speed intermittently.

  Support for HP Smart friend assured me that the behavior of higher fan speed would not result in problems with premature failure on the road.  You agree?

  They said that my choice was to keep the disabled Intel HD graphics driver and use the NVIDIA only, or living the problem until HP one releases pilot newest Intel - it affects only game, all other functions seem normal.

• After Effects CS5 stuck to the Windows 10 1511 homescreen

  I had been using After Effects CS5 on Windows 10 smoothly for several weeks.  A few days ago I have upgraded to Windows 10 version 1511 (a major update), and now when I launch After Effects, the splash screen is stuck at "Initializing MediaCore."  It never makes it beyond that.  I searched and tried all the troubleshooting methods that I could find.  I have reinstalled QuickTime.  I reinstalled After Effects.  I've updated After Effects.  I have reset and delete the Preferences folder.  I have disabled the firewall.  I rebooted.  I went through the suggested troubleshooting steps.

  Any suggestions or ideas on what could be the problem?  On a perhaps related note, after I updated Windows 10, I had a very strange problem a few times: when I started in Windows, the music started to come out of the speakers.  A little later, I heard static-y voice in speakers.  It was like this by the blue, no Spotify or anything I know.  My laptop picked up somehow radio waves?  Was it a bizarre kind of spyware?  Since then, I scanned with spyware.  Thanks for reading!

  I found the problem after watching Process Monitor from Microsoft.  I had to uninstall Matrox codecs that I had installed quite earlier.  I tried to uninstall/reinstall Quicktime, but failed to remove the Matrox codecs.

• How can I make Adobe XI the default program for PDF files in Windows version 1511 10?

  I have Adobe Acrobat X! Standard (11.0.13).  I have recently upgraded to Windows 10 version 1511.  After the upgrade, it turned my default pdf for Microsoft Edge program.  I would like to change the default value to Adobe Acrobat Standard XI.  I tried to open a PDF with Adobe and Adobe followed automatically make my default program Adobe.  However, when I selected OK, I received an error message Adobe claiming that couldn't make Adobe default program.  Any suggestions?

  Hi johnv1955,

  Right-click on the PDF file, select open with-> choose default program, select Acrobat XI & confirm the changes.

  Kind regards
  Nicos

• Update Windows 10 1511, build 10586.14 breaks my WiFi

  Just this last version of Windows 10 pushes my ALL NEW Lenovo IdeaCentre AIO 700 and he broke the wifi on the computer that was working fine before.

  To reset the device to factory settings then went through the process carefully (taking up hours of time) and he broke again. Adapter WiFi does not appear in Device Manager.

  This is a JOKE! If I don't get this fixed in 2-3 days then this computer goes back to the shop and ask for a full refund.

  THIS PROBLEM!

  NF1.

  Thanks for the reply. I managed to fix the problem last night by uninstalling the driver wifi, but ensure that the option to completely remove the drivers and files is checked. A reinstallation of the driver seemed to correct the problem. I'll be followed to make sure that it still works today.

• Problem to install the latest version of Itunes on Windows 10 Version 1511

  Hello. I use Windows Version 1511 10, I downloaded the last itunes6464setup, I started the installation but in the middle of installation a popup message saying: "there is a problem with the Windows Installer package. A program required for this install to complete could not be run. Please contact the support staff"what should I do?

  Help, please

  Thank you.

  Try to repair and then remove Apple Software Update first, then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• HP EliteBook 2760p: security for the Client software HP will not install on Windows 10 Version 1511

  I got the HP Client Security software installed and running under microsoft Windows 10. It will install is no longer under Windows Version 1511 10.

  - Or nearby - 17 November Microsoft has released an update to Windows 10 Version 1511.
  The Windows Update process necessary to uninstall the security software for the HP customer as it has been marked as incompatible.

  Before you uninstall, I've upgraded to version VERSION: 8.3.16.2035 (SP72998.exe). The installation under this version of Windows 10 properly filled.

  I have re-directed the Windows Update process and it beating Pavilion HP Client Security Software as incompatible and need it be uninstalled before the update of Windows 10 Version 1511.

  I uninstalled the HP Client Security software, upgrade to Windows 10 Version 1511. When reinstalling SP72998.exe, after you open a powershell window, the installation fails with the message "error 1722" There is a problem with this Windows Installer Package... Action PinShortcut.9EA0... "Location: c:\users\"username removed"\AppData\local\...\DPClientCOnsole.exe.

  A quick capture of window powershell before she disappears reveals a similar error: 'verb Pin to taskbar not found. "

  It seems that something in the Setup program tries to pin to the taskbar is a failure. A quick google search seems to indicate that the interface script to pin has been removed in Windows 10.

  I tried to install the update with Windows 8 compatibility, run as administrator, clean boot Windows. The same error each time.

  An installer updated that works with Windows 10 Version 1511 or a workaround would be greatly appreciated so I can regain the use of software security tools for the HP customer as a login by fingerprint reader.

  Workaround in this post worked perfectly with Windows Version 1511 10 and HP Client Security Software VERSION: 8.3.16.2035 (SP72998.exe).

• 10 1511 Update WIndows - Dreamweaver and creative cloud launch

  Once the windows 10 1511 update the creative application of cloud, and the dreamweaver application no longer launch, the dreamweaver application will simply sit on a splash screen.  The CC app launcher/installer will not do anything, the exe appears in taskman but nothing never appears on the screen.  These are critical applications that claim to be compatible with win10.

  I want to nuke it from orbit and run the cleanup tool reinstall process: use of the Adobe Creative Cloud cleaning tool to solve installation problems

• Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

  Hi all

  After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

  What should do?

  standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

  Kind regards

  Robert

  Thank you hipolitorodrigues,

  your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

  CU, Robert

  8  re: does not start Lightroom CC

    

     Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

  Go to the Panel, then programs and features.

  Please select Microsoft Visual C++ 2012, 2013, and fix it.

  Restart the computer and then let me know if the application works.