Windows XP sound recorder window is not resized.

Similar Questions

• Sound sound record play will not activate the sound

  the icon of audio on the screen and on my computer are cut and every time I press on it is not turn the sound back on. What should I do?

  Hello

  I see that you are unable to reactivate sound.

  Do not worry! I'm here to help.

  You did changes to the computer before the show?

  Let's try the following and check if it works:

  Method 1:

  You can run the troubleshooter Audio playing & check if this solves problems.

  Open the troubleshooting of Audio playback

  Method 2:

  You can try to download & install the latest drivers for sound card on the manufacturing site & check if the problem persists.

  Reference: update a hardware driver that is not working properly

  Hope the helps of information. Please post back and we do know.

  If you need assistance regarding Windows please keep us informed.

• Windows sound recorder XP does not work?

  He was of use without problem, but not more. At the same time I can't hear the voice when I play any vedio You Tube

  Hello

  We will try to use the system restore back to a point where the recorder worked properly and played videos with audio.
  How to restore Windows XP to a previous state?
  http://support.Microsoft.com/kb/306084
   
  Hope this information helps.

• Adobe Acrobat CS3 window is not resized

  Hello

  I am currently using Adobe CS 3 on a Lenovo X200T with Windows 7 installed.  I have a problem with Acrobat CS3 which I did have with previous computers.  I think all that resize the window is when I open a document in acrobat, it is that size.  I mean, I can resize borders and everything, but it does not follow the document.  By example, if I open the document and it is with windows, and in a corner of the page, and I maximize, acrobat will maximize but the document remains the same, just with a gray border larger to fill the space.  Scroll bars do not move either, so when I do the small window, they sometimes disappear and I can't navigate easily.  The only way to get the window size I want is to resize the window, next to adobe, and then open the document again.

  Can I do to solve this problem?

  Eric

  I think that CS3 is connected to AA8. If this is the case, you will probably need to update for Win 7. AA9 is the only version currently certified for WIn 7.

• Bars hidden not resizing fp

  Hello

  I just upgraded to LabVIEW 2013 32 bit (f2 patch installed) on Win7 64-bit.

  Since then, at least one of my screws (main application vi) shows the following behaviors:

  When running the scroll bars and the menu bar that must be hidden as defined properties are replaced by a white area, but the window is not resized.

  This causes the fp to be larger than defined in the properties and look ugly.

  An another vi (main vi from another app) shows similar behavior:

  It displays the same white area and therefore a fp oversized, but it does only for a second after I hit, and it comes to resizing of the window.

  I could not find a difference in the properties of these two screws - now goes to double check.

  Any suggestions?

  Best regards

  Florian

  See if my answer here can solve your problem. Seems similar. (read the entire thread).

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• When I record a video with sound recorder windows 8.1 youtube I can't hear any sound when I play it back

  Why can I not hear any sound recording of youtube videos with my tape recorder windows 8.1?

  You still have this problem?

  • [1004066/questions/1004066]
  • [1004104/questions/1004104]

• Windows sound recorder xp has no recording or playback buttons

  My tape recorder opens with no recording or playback button. How to come?

  My tape recorder opens with no recording or playback button. How to come?

  ==============================================
  Makes it look like the following screenshot:

  http://www.guidebookgallery.org/pics/GUI/applications/multimedia/sound/winxppro.PNG

  If it is just to the left, click on the red button to start.

  MS Info:

  Using the sound recorder:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_soundrecorder.mspx?mfr=true

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• set the default recording time in windows sound recorder

  Looking for a way to increase the default value to the recording of the sounds found in XP home recorder.  There is no documentation that I can find to the configuration

  Hello

  In the default recorder recording time is 60 seconds. There is a solution to increase the maximum recording time. Follow the steps mentioned below:

  Step 1:
  a. utility start Sound recorder.
  b. click on save and then Sound Recorder run for 60 seconds.
  c. once the sound recorder to stop recording, click Save as on the file menu, and name the file Blank.wav.
  d. in order to increase the maximum duration of recording in sound recorder, click Insert a file in the Edit menu, and then insert the Blank.wav file saved in step 3. When you do this,
  the maximum recording time is increased by 60 seconds. You can repeat this step once for each additional minute recording that you want to add. For example, for 5 minutes
  recording time, insert the Blank.wav file five times.

  Step 2:
  To make the tape recorder automatically use the extended length of the recording time:
  a. Click Start and then click Open.
  b. double-click the programs folder.
  c. double-click the Accessories folder.
  d. double-click the multimedia file or entertainment.
  e. right - click sound recorder and then click Properties.
  f. click on the shortcut tab.
  g. in the target box, press END, press the SPACEBAR and type the location of the file Blank.wav.

  For example, if the target is 'C:\Windows\sndrec32.exe', and the location of the Blank.wav file isC:\Blank.wav, the new line in the target box is "C:\Windows\sndrec32.exe C:\Blank.wav"

  The next time that you start the tape recorder, the Blank.wav file opens automatically. After you save your new .wav file, you can click on remove after the current Position in the Edit menu for
  Remove the extra space in the file.

  NOTE: when you have finished recording and editing of your new .wav file, save the file with a new file name.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to change the Windows Vista sound recorder

  Does anyone have information on how to editing can be done in sound recorder in Windows Vista, such as the removal of noise, etc. ?

  You would not be able to change the sound by using the Windows Vista sound recorder after recording is done, you would need a different for that one application. In this case, you can instead to fix the problem before registration, you can refer to the link below to get instructions on how to reduce POPs, clicks or other distortions.

  http://support.Microsoft.com/kb/936693

  For more information about how to troubleshoot audio recording in Windows Vista, you can check the link below as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

• I lost Sound Recorder after Windows Update, I need to download again

  Original title: I have a new Acer Windows PC 7.__I rfunning have lost Sound Recorder and were informed by PC World, I need to download again.

  I was using Sound Recorder, when I had to abandon emergency program. When I closed the PC it started installing Windows updates and froze. When I restarted later I had to do it in safe mode to get the installation to complete. Subsequently, I found that for tape recorder desktop shortcuts worked more (which is usual when updates of Windows itself), but this time I couldn't find sound recorder again. I tried the box "search programs and files" on the search button and the search function of Windows Explorer. The program is not there.

  How to redownload it?

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I record audio programs that run through Windows 7 on the sound recorder? Where is the master volume.

  How to record audio programs in windows 7? -in previous versions of windows, I could use the main volume control to select "wave" and that way save audio playing on other programs playing through windows and using windows as a simple sampling devicem - I have a relatek 11 hd audio device/card's directx - in audio devices ControlPanel / / / / material/sound/manage / I see only selection of recording for the microphone or line - how can - record sound through windows 7 - can I buy a cable and put it in the headphone and microphone - I'm trying to address the problem in a way that is now not in windows - I want to play things and recording in a small way - could you provide an answer on how audio intgrates of hardware and software with windows - I can't believe really wanting I could do on the previous windows versions - please help

  Start - All Programs - Accessories - Sound Recorder will launch the utility. You can easily find it by running aid and entering "sound recording."

  Right click the speaker icon in the system tray, select recording devices and set the desired default entry.

• How to get Windows 7 Sound Recorder to record audio from the computer?

  I team with my boss and another customer meetings and we want their registered and we use phone calls from Gmail which means that audio is delivered directly through the internet, and Sound Recorder, I found out but I can't record audio only regular computer unless I Plug one wire in the headphone jack that goes to the mic socket who made the impossible phone call since taking mic is already taken.

  I saw in Windows help can I change the source to be recorded, but it lists only microphones (one built into my laptop is default).

  Is there a way to change the entry from the audio recording of the computer?

  My alternative is to find a cable between the MIC and the sound output in order to hear, speak and record at the same time, which I have never seen elsewhere.

  I also do this all the time.  All what I have to do to set up the computer for that is: -.

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set Rec. reading * as default device

  [* the name of your topic in the recording tab may be different - you just choose the entry that is not a micro device]

  Sound recorder will then record sounds coming through the computer.

  - - - - - - - - - - - - - - - - - - - - - - -

  If I ever want to record from the microphone, I need to reverse the above setting by:

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set the internal mic as default device

  Sound recorder will then record sounds coming through the microphone.

• Windows XP Sound Recorder [sndrec32.exe] in Windows 7 64 bit?

  Utility tape recorder for Windows XP [sndrec32.exe] works in Windows 7 64 bit?

  The reason I ask: under XP, I use sound recorder to audition small sound files for possible use as system sounds. No sense to launch a 'real' drive just to play a .wav of 2 seconds.

  I know I could use the control panel of sounds and Audio for this (on XP) devices. But it's so convenient to the tape recorder on the Office Park and then drag and drop dozens of files .wav on it.

  The sound recorder in Windows 7 utility seems to be on the recording of the sounds, not to play them.

  XMPlay is a great and very light .wav player. It starts almost instantly. XMPlay is now my default .wav player replacing Sound Recorder (sndrec32.exe) in earlier versions of Windows. (XMPlay plays too, other formats, including video.)

• Problems of sound recording in Windows 7

  My wife has just purchased Dragon speech-to-text software and try to make it work. When she speaks into the microphone, the software shows that it is to hear his voice (levels bounce up and down with the cadence of his voice), but Dragon indicates that he has trouble hearing.

  She then went to Windows Sound recorder and it is very well made. But then in Control Panel, when you go through devices to configure the microphone and try to run this process, he also complains that he cannot hear. Is attached a screenshot of the dialog that appears in this process.

  The fact that it works in sound recorder makes me think that the device driver levels levels micro, etc. must be correct and functional. So it's strange to me that the thing in Control Panel does not work as it is also part of Windows.

  Any ideas what might be happening here? We have removed and re - detect the hardware and reinstalled the device drivers and none of this has made a difference.

  His is an all-in-one machine Acer Aspire running Windows 7 Ultimate.

  Thank you... Rogers

  

  Hello Roger,.

  According to the description, I understand that the microphone on your device becomes an audio input, however, there are problems during the recording of the voice. I will certainly help you in this matter. To better understand the issue, I would like to ask you a few questions.

  1. You use a headset to record the sound?

  2. You have installed all the latest drivers for the computer?

  3. Have you installed an antivirus software?

  4. What Dragon speech-to-text version are you using?

  I suggest you test the compatibility of the software with windows 7 to do this, click on the link below:

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  This problem may occur when there is a conflict with the driver or problems with registration of the components. I suggest you try the following methods to diagnose and resolve the problem.

  Method 1: Recording Audio Troubleshooter

  It checks the common issues, for example by ensuring that both a map of his work and a recording device are installed on your computer. To do this, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  I also suggest you to install the drivers in compatibility mode. By this, you can install a program more former who maybe isn't compatible with your version of windows. For more information on this subject, click on the link below.

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

   

  Hope this information was useful.