Error 1920 service smart card could not start. With the help of Windows 8

Similar Questions

• Firewall service Winows vista could not start in the field

  When I join my vista system in the field of state changes service not firewall system service can be started and can not RRAS and ping the system, but when I'm trying to change the system of working group and restart twice the service will work but bring the system back to the service area will run if I restart the system.

  If anyone has a permanent resolution please guide me.

  Thank you best regards &,.

  Elodie Mohan.

  Hello Mohan,

  Since you are on a domain, your Windows Vista is better suited for the IT Pro TechNet public. Please post your question in theTechnet Windows Vista Security Forum. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why am I see sitting "Homegroup journal" could not start with the following error: 0xC0000035

  repeated error seen in the event viewer.  How should a windows xp pro pc and a win 7 pro 64-bit laptop or network?  I have the laptop as a member of the task force of the older XP.  It is a peer to peer home network

  Hi mgmombo_726,

  ·         He has already worked?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow the steps in the article.

  Networking of computers running different versions of Windows

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

  1068

  Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

  Hello! I found the solution to my problem here:

  http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

  It is possible that it would be more useful for someone.

• What is the code for error "the dependency service or group could not start": 1068

  What is "the dependency service or group could start"?

  This seems to be a HUGE problem for PC users so much; It gives rise to the error 1068 code and effects so many aspects of our machines...

  What is this area of computing? What it means? If we understood this, solutions might be easier to find?
  From what I can deduce (I could be wrong) there seems to be a communication error; But why did affect many different areas of the machine?
  I recently corrected an error 1068 on an internet connection and then again on spooler print issue; Now, I'm trying to solve the error even on a sound broadcast. Frustrated? Isn't the half of it! WHAT IS THIS ERROR?

  the dependency service or group could not start
  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/563b908c-AA24-4000-9b2d-b6ff02f10c56

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Printer Spooler error 1068: the dependency service or group could not start

  Original title: the printer spooler error

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start
  
  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start

  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  need to update Printer Spooler service...

  Run the following as run as administrator...

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  Reset...

• Unable to backup get error 1608 the dependency service or group could not start

  Original title: unable to backup

  1608 the dependency service or group could not start. Task Scheduler does not

  Hi LesComan,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: I also suggest you temporarily disable the software antivirus (and any other security software) and firewall on the computer and see if that fixes the problem.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

   

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps.

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  Dear Forums

  Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  * Also, I sent my first question 20 minutes ago, not yet approved? Your return indicated "approved" e-mail, * why do I not see my question below still displayed? >

  The members of the Forum Pro first - Hello
  

  
  

  Can someone out there describe in simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a friend aerial artist model with white moving belt in silk on a rest mainly black background layer and a change to a night sky stars panorama I photographed previously?)

  I know that this can easily be done, I have worked in thousands of still images with creative cloud for previous years, but not yet in video in Premiere Pro, so thanks for any advice.

  I enclose the actual video that I use and some samples of the fields of the night sky that I photographed recently for ideas

  I intend to make possibly more elaborate, but for now if anyone of you could just show the basic commands and menus/menus to start to do it simply and quickly. Maybe how to most later convert it tone black & white or sepia. The ideas here is to recreate a sequence modern suite of familiar German Film, wings of desire. Perhaps also a progression in the future to create an effect of the night sky very slowly turning into one layer background behind the main façade first video layer in normal movement. Then maybe a little further - how to adjust the speed of the front to a path layer more slow half price while keeping the substantive motion, the original speed. (* although I realize that I didn't do in 64 fps for the slow movement, I am not concerned about that and would actually welcome a light old world "flip effect framework" as if, in appearance of the films more former silent motion.) * In addition, possibly cutting on 'dead time' a few seconds at the beginning of the video and the 2nd or 3rd time for a few seconds of this unexpected error, when the silk scarf fell on the camera lens (without changing the audio timeline?)

  * (I use Windows 7 on a Toshiba Satellite L555 - [only RAM 4 MB. rates], 2009)

  * Video sample >

  Sarah Seiler Aerial - camera Check-An Unedited manifesto-Dec 16 2015 - YouTube

  * Background samples >

  w-left-west-frames-with-earlier_sept-8_9-2015_1_stitch-mercator-projection-2a-titles-5000-pxl-b_galaxies-at-right-enlarged-5500-pxl http://www.dpreview.com/galleries/1579463287/photos/3374478/Trillium-Lake-Aurora-add-26-ne

  Comet Lovejoy Andromeda brand camera telescope DSC3857-1a-blue-light-increase-layer-Nov 20 2015: Mark Seibold: Galler...

  Larch Mtn Night Sky Sony NEX5R 5 Oct 2015_panorama point 2 b side of cropped rt 3000 pxl: Mark Seibold: galleries: digital...

  Cannon Beach Haystack Rock mamiya 55mm 25 2015_10_stitch_102 26 Aug frames Projection of Mercator Crop dark as he nu Fi...

  Trillium Lake Mount Hood Dark Night Sky Nov 10 2014_stitch a 5000 pxl f to fill 2: Mark Seibold: galleries: Digital P....

  Thanks so much for all the advice of one of you in the Adobe Premiere Pro forums,

  Mark E. Seibold, artist-astronomer, Portland Oregon

  Duplicate thread here: may describe in the simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a model friend artist air with white passage belt mainly black silk )

  Thank you

  Regalo

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey