Win operating system could not start because of the error in the software on the Satellite A85-S107?

Similar Questions

• New HP Pavilion laptop 15-e026AX (Windows 8 operating system) do not start

  I am extremely irritated that the new HP Pavilion 15 - e026AX laptop I bought flipkart.com online does not start. Whenever I turn on the machine it is automatically goes to the BACK gives me an option of opening Documents HP, or who allows as the operating system does not start. If the OS has not been installed? I have not received any manual with the machine either! Help, please!

  Sincerely

  CGI

  Hey, CGI,.

  Do you know if the unit is brand new, factory sealed, or if it is a unit used/given to nine? Since it was not purchased directly from HP, it is difficult to know what had been done to the unit before he did in your hands.

  Since it came to you in this condition, please contact the seller and see if they can replace or help out you.

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• Error: operating system could not be loaded because a required file is missing or contains errors. Error code: 0oxc0000185

  Hello my dear,

  I need your help if you can as soon as possible.

  My problem was unexpected, when I turned on my laptop computer and received the following message:

  "Your pc needs to be repaired the application ot operating system could not be loaded because a required file is missing or contains errors.

  File: \Windows\system32\winload. EFI

  Error code: 0oxc0000185

  You will need to use tools of recovery on your installation media. »

  Here some useful information can by important for you:

  * my laptop is dell inspiron 15R.

  Operating system is windows 8.

  * windows has been installed on the laptop (by the company) and I DID NOT CHANGE IT.

  * I don't have a windows CD.

  * The problem occurs the first time.

  I am ready to give all forgotten information.

  Help, please.

  Thank you very much.

  Original title: recovery

  Companies who pre-install Windows on your computer usually have a generally accessible, integrated conservation program by rebooting and press a special recovery as F2, delete, or escape.

  You want to contact Dell or refer to the manual of your laptop to find out how to start the repair process.

  You can go to http://support.dell.com to discuss with their technical support directly too.

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Minecraft could not start because it could not find an accelerated opening

  I installed Minecraft and when I tried to install and download got this error message - don't know what to do next

  Bad video card drivers!

  Minecraft could not start because it did not find an accelerated OpenGL mode.
  Generally, this can be corrected by updating the video card drivers.

  BEGIN 7fe0271 error REPORT
  Generated 17/03/12 19:51

  Minecraft: Minecraft 1.2.3
  OS: Windows XP (x 86) version 5.1
  Java: 1.6.0_31, Sun Microsystems Inc.
  VM: Java hotspot Client VM (mixed mode), Sun Microsystems Inc.
  LWJGL: 2.4.2
  Unable to get system (java.lang.NullPointerException) properties

  org.lwjgl.LWJGLException: Pixel format not accelerated
  t org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelForma (Native Method)
  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat (WindowsPeerInfo.java:52)
  at org.lwjgl.opengl.WindowsDisplay.createWindow (Windows wsDisplay.java:185)
  at org.lwjgl.opengl.Display.createWindow (Display.java:311)
  at org.lwjgl.opengl.Display.create(Display.java:856)
  at org.lwjgl.opengl.Display.create(Display.java:784)
  at org.lwjgl.opengl.Display.create(Display.java:765)
  at net.minecraft.client.Minecraft.a(SourceFile:230)
  at net.minecraft.client.Minecraft.run(SourceFile:650)
  at java.lang.Thread.run (unknown Source)

  ERROR e32a7ca2 END REPORT

  Have you read this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65633

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• "Minecraft could not start because it did not find an OpenGL accelerated...". »

  Dear support,

  I am trying to play minecraft on a computer that I just installed windows XP PRO 32 BIT
  on. When I start the game, it is said:

  "Minecraft could not start because it did not find an OpenGL accelerated...". »

  I checked the driver for video card and updated website of microsoft as well as from the HP Web site, but then started having a similar error message
  again, the video card is intregate: Intel 82915 G/GV/910GL Express Chipset Family

  My PC: HP P4
  RAM: 1 GB
  CPU: 3.06 GHz
  OS: Windows XP pro SP3 32-bit

  Best regards

  madgestic. Star

  Note: would please send the answer to the Email: * address email is removed from the privacy *

  Hi Vigen,

  As you are always faced with the question after update display card drivers, I recommend you contact the game Minecraft help support:

  http://www.minecraftforum.NET/viewforum.php?f=1002

• Cannot open Windows mail, WinMail.exe - Unable to locate component, could not start because SHELD32.dll was not found

  Original title: my Windows Mail program and shortened, will not open.

  My Windows Mail program and shortened, will not open.  I get a box of popup titled WinMail.exe - impossible to component locat.  Inside it is said he "could not start because SHELD32.dll was not found."  Reinstalling the application may fix this problem. "When I click OK another box opens with"MSOE.dll is not found. »

  Hello

  I moved your post to the forum Windows Vista under programs category. They are experts in the field of your request and would be in a better position to answer your concerns.

  Thank you.

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• Client DHCP does not start because of the dependency

  Suddenly my laptop IBM T61 Windows XP sp3 Pro link is more to my Belkin router either wired or wireless. This started after I hosted a series of Windows to perform updates. Using the command ipconfig and other signs, it seems that the DHCP process no longer occurs. Research in Non-Plug-and-Play Device Manager, I could see that there was a yellow flag next to 'netBT' which is a dependency for a number of services such as DHCP. Windows suggested I uninstall and then reinstall the netBT.sys "driver". Well, it uninstalled OK but it is now out of the list and without him in charge I'm cut network (I have a Vista laptop second Home that I use on the lookout for ideas tech). I moved a copy of netBT.sys from the SP3 i386 folder in system32\drivers to replace the old, just in case.
  How to me netBT to load and work again? I spent several hours restart, activation and deactivation and anything else I could think or find Tech Tips.

  SOLVED. NetBT corrupt registry entry. HKLM\system\currentcontrolset\services\NetBT
  After many hours of detective work, I found the idea in the journal of the events through MSCONFIG. Error type 7001 means service could not start because of a dependency (I knew that), but he went on to say "dir name or path incorrect syntax. I went into the registry and used exactly the same syntax of path as specified in "system32\DRIVERS\netBT.sys" NetBIOS and DHCP service has started.

  Jim in Arizona

• Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

  Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

  I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

  Hi FilippoPosato,
   
  This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
   
  To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
   
  For more information, see:
  Error message: Windows did not start because of an error in...
   
  More information on:
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console