Third-party EtherCAT device

Similar Questions

• Activate a call forward with a third party SIP device or an analog device

  Hello

  In a CUCMv9, how do I activate a call forward (all, not busy, no answer...) with third party SIP device or an analog device, connected to a fxs?

  I want to activate call forward like an Alcatel or Aastra PBX with a code.

  For example, I pick up the phone, with the code * 95 followed by the destination number and hang up the phone. And use the #95 to desactivate the call forward.

  Is it possible?

  Thank you.

  No codes for 3rd not part of SIP phones, no way to do it. Or for that matter, not even for Cisco phones, other than the CFA.

  Something other than CFA must be done via CCMadmin or CCMuser to any type of phone.

  For FXS which is not feasible if you run SCCP

  http://www.Cisco.com/en/us/partner/docs/iOS/voice/FXS/configuration/guide/fxssccpsplmft.html

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Is it possible to save an EX60 as a third-party SIP (Advanced) on the CUCM device?

  Hello world

  I'm new to the word video, telepresence, H323, SIP.

  I know that it is now possible (and recommended) to save natively EX60/90 on the CUCM, IE as telepresence devices (whether with the TC firmware or TE) and support the full functionality rather than to be registered as a device SIP but still... is only possible and what is the configuration?

  Here's the final scenario, the SIP registration is a test associated with this scenario:

  -CUCM version 7.1.5

  -MSE 8510

  -EX60 TC 5.1

  -Jabber clients listed on CUPS

  My customer wants to make point-to-point calls between EX60 and Jabber clients.

  Two possibilities:

  1-

  -EX60 registered as a device on the MSE 8510 H323

  -MSE 8510 SIP Trunk with CUCM

  -EX60 and Jabber customers can call each other via the SIP Trunk

  2-

  -Given that the customer wants only point to point calls, I just thought I could register the EX60 directly to the CUCM as a third-party SIP device (Advanced because I need video calls). CUCM version 7.1.5 then did I can't save it as a device of EX60. What do you think?

  3-

  -What about recording on the CUCM H323? CUCM constitutes a H323 Gatekeeper or do you need an external controller. What is the point of having a customer registered H323 (or created as a device) on the CUCM?

  Thank you

  Hi Matt

  Please refer to

  https://supportforums.Cisco.com/message/3671155#3671155

  https://supportforums.Cisco.com/message/3919058#3919058

  hope this fixes your first query.

  3 > registraion H323 on CUCM, i don't know if I'm 100% correct but there is an option of setting up a H323 gateway on cucm

  You can created a h323 trunk

  There would be a better support 8.6 from

  still I'll leave to the experts of cucm to comment

  Thank you

  Ravi Kr.

• Blind transfer does not not for third-party phones

  Hello

  I use CUCM 10.5 and Cisco and Ascom MyCo phones third-party. I just stumbled across a problem where the immediate or blind transmission does not work on the third-party SIP devices. However, the transfer works very well on all Cisco phones. Against the workflow and no calls work but couldn't find anything wrong. Please help/tips.

  Hi Anish,

  Can check you for 'Calling rerouting space research' on the phone has access to the number you have transferred blind to.

  JB

• Can I purchase care from apple for a device I bought by a third party such as Best Buy or Groupon retailer?

  Can I purchase care from apple for a device I bought by a third party such as Best Buy or Groupon retailer?

  Yes, if it's new.

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Third party material does not work on iPad 2 Air

  I recently brought an iPad 2 Air, but it was found that some of my third-party devices do not work with it. I also own an iPad mini, so I try the equipment on the mini, it works. I've been worrying is that my iPad 2 Air was a problem of equipment causing it or what. Two iPads running iOS 9.3.1.

  My Equil Smartpen 2, it can connected on bluetooth, but the software does not recognize that the pen was connected.

  My I-Flash Drive have the same problem, the software does not recognize it and hang.

  No matter what iPad 2 Clean Air there have the same problem, or should I send it for repair?

  Denny Lee

  First of all, I would like to try a reset by pressing the power and Home keys until the Apple logo appears.

  If this does not work, I suggest that you visit an Apple store (with all your gear) and ask them to test/diagnose the problem.

  Barry

• If the third party amendment by the authorized service center which is then liable to a client in good faith?

  Dear Sir/Madam,

  I'm an avid user of your iphone device 6 more, I bought my iphone 6 more 64 GB on aug-2015 but I just use this device only for a month and the rest of the time machine is with the service center or a lot of problem. I bought the iphone as a better phone in my life, but since the day I bought this phone I have faced the problem and until today, I had a same problem. For this problem, I called your service the customer more than 100 times and I visited your center customer service more than 10 times, including 7 times, they supported my phone without even looking at what the problem is all about, and 3 times, they have just updated the software of the phone and return to me , on January 15, 2016 when I presented my iphone with kamla nagar service center, they had my phone with them for a week and after a week they just gave my phone back by saying simply that there was a software problem that is updated by our care. 28 January 2016 again I need the visit to your service center of kamla nagar for the same question and they are with themselves for 2 week and after that they called and said that on device rear panel is pregnant by third party do, thereafter for 2 weeks, I presented my phone with the PSN Service Center and they said that your phone is already open by third party.

  I bought this phone because of its good will and after-sales service, but after seeing so many obstacles in first 6 months of the purchase I would please mention its my humble request to pay my money back because now somewhere down the line I would prefer not to use any Apple product and I probably make sure that none of my friends use it either. And Apple is such a renowned brand, I'm sure they won't be happy to see themselves in the Court of the consumer.

  Make sure that the worksheet

  You do not discuss Apple here. It is a forum for technical support to the user. Is this service center you mention an Apple authorized Service provider, or is it a real Apple Store? If it's an Apple authorized service provider, then you will need to start your question with them. If you want to try to contact Apple, you can use this support document to see if there is a number that you can use in your area. Contact Apple for support and service - Apple Support

• A third party read or access my messages without knowing?

  A third party can access my messages, watsapp or my email without my knowledge or permission of their device, a computer or Mac?

  iMessages is encrypted, so unless someone has your Apple ID and password, you shouldn't have a problem. If your email is safe depends on a number of factors, including the strength your passkey is, is how reliable your email provider and if the Government has issued a summons to appear as a guide. In the United States, there are classes of queries from Government for requiring information do not warn the user, the mail provider. I wouldn't consider sending secure enough to send credit card information or social security number. Examine the encryption options if you need for secure e-mail.

  I don't know enough about WhatsApp to comment on how secure it is.

  What should really be important, who's going to be interested in your information. If it's just a jealous ex, secure passwords of accounts and to keep all your devices protected by Word is probably enough. If you have attracted the attention of a Government, which is another case.

• I have a problem with error 53.I know this mistake is for people who have their iPhones fixed by a third party before, the thing is my iphone 6 was never taken to a third party before, so all opinions

  I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version

  All view of what can be done

  If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?

  Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..

• Start/Invoking third-party apps from the WebWorks app

  Hi all

  Just a quick question. Is it possible to start/call a third party on a blackberry java application 7 from a WebWorks app?

  I did some research and it seems that it is impossible. I did the opposite and opened a WebWorks app from java application successfully but hope that it is possible.

  Thank you all for your time.

  Rob

  Unfortunately BBOS was not as flexible as BlackBerry 10 invocation framework and what was available on the side of Java is not inherently available in WebWorks.

  You can use the ApplicationManager:
  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/system/ApplicationManager.html

  Launch an application, if you know the information on the module itself.

  launch
  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/system/ApplicationManager.html...

  launchApplication
  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/system/ApplicationManager.html...

  runApplication
  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/system/ApplicationManager.html...
  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/system/ApplicationManager.html...

  However, if you want to access these in WebWorks, you create a custom extension to call the native API (Java).
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/Smartphone/template

• Monitors high-resolution produce unreadably small fonts in software from third-party manufacturers with Windows 7 Professional.

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Xeon E3 1226 v3 3.30 GHz 33 ° C
  Technology 22nm Haswell-WS
  RAM
  16.0 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  LENOVO SHARKBAY (SOCKET 0) 28 ° C
  Graphics
  LEN E2323swA (1920x1080@60Hz)
  LEN E2323swA (1920x1080@60Hz)
  2047 MB NVIDIA Quadro K620 (NVIDIA) 40 ° C
  Storage
  931GB Western Digital WDC WD10EZEX-08M2NA0 SCSI Disk Device (SATA) 34 ° C
  931GB TOSHIBA external USB 3.0 Flash DRIVE (USB (SATA)) 33 ° C
  29GB SanDisk Cruzer Glide peripheral USB (USB)
  Optical drives
  HL-DT-ST DVD-RAM GHC0N SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  The default resolution and "recommended" for my two monitors lenovo is 1920 x 1080. I have a new system and I tried for a few weeks now to something to work with screen resolution and third-party apps. I am under W7 Pro right now, but will soon be getting to 10.

  The high resolution is not a problem in 7 with any Microsoft stuff. With the help of a custom of the DPI setting takes care of all the native stuff. Some third-party applications can be set as well. For example, Corel Photo Paint X 7 has bars of detachable command with command icons that can be set to small, medium or large. When the size of the icon is changed, the size of the font adjusts accordingly and it is perfectly feasible, acknowledging the icons or by reading the text. It is perfect for this dual screen system and works like a charm.

  However, most of other software companies are not quite as respectful of their clients. Bryce, formerly owned by Corel, but now DAZ despicable, is not removable toolbars and there is no options available to adjust the sizes of icons in order. Even if preferences to provide an engaging, multiple monitor option not to release the toolbars or increase the font size. It only opens the Bryce "Labs" in the second monitor in a position at the end of the dialog box, half of the Cup.

  It also applies even in a top of the range of applications such as VIEW and Smith Micro, Poser Pro. They present menus and toolbar icons that are so tiny, it is necessary to use the Magnifier Microsoft to make and which isn't real solution when your work with graphics programs. It's incredibly awkward.

  My old system, running XP Pro, SP3, which I always put in place and operational, has a screen resolution of 1280 X 768, and it displays all the software of third party very well. If I try to use this resolution with W7 and these monitors high resolution, I get a crushed image down and half on the screen which is useless. I can read everything very well, but all images are short and fat! If it was possible to type values for the height and width, using an infinite scale rather than the fixed scale that is provided by the slider over, nicked in W7, it would be possible to find a combination that worked. Then, once the wreck was set for third party stuff, the custom DPI settings Windows could take care of the native stuff.

  I had an Oracle VirtualBox running for awhile and loaded the third of things out there and it worked for awhile but it did not offer the ability double screen and, in any case, after awhile it started to get really uptight and I finally just had to get rid of.

  Really, I would be much happier if I could just load XP Pro on this machine and do run as quickly as things that made to run on it. The only reason why I got a new system was the need for more speed and muscle. But if I can't use my favorite, applications worth it?

  Is there no workaround solution that will make it possible to adjust the resolution so that the third-party applications are fully functional using all the space on the screen?

  Thank you to everyone who takes the time to read and respond.

  Since no one answered I'll provide the solution myself. Doing right thing 'upgrade' to Windows 10 has this problem of resolution.

  Other than that, getting W10 to work even at halfway was a nightmare.

• Is it possible to access the Fm Radio of the third-party application on a Blackberry 10 layer?

  Hi all

  I'm interested in a custom application tuner FM Radio for Blackberry 10 (Q5, Q10 or Z30) device of programming - I know that they have the necessary equipment to receive the FM Radio and the operating system includes an application FM Radio, but can applications without any special authorization / access control the tuner FM Radio?  If so, where are the APIs for FM Radio on Blackberry 10 (I couldn't find it under the various options of SDK)?

  Assuming that the answer to this question is Yes, third-party applications can access the audio PCM received by the FM Radio chipset? If so, how?

  Thank you!

  I don't believe it. FM radio capacity up to 10.2.1, who did not have an associated, SDK version because there was no new API has not been added.

  If there is a feature you are interested in, the best option is to record about the developer Issue Tracker:

  SAID

• Could not access the internet via third party application

  Hi Forum members,

  I develop a thrid party application, which makes http calls to retrieve the data.

  Perfectly on Simulator to work.

  I'm testing this app on BB 9000 "BOLD", he is not able to do an HTTP call.

  Code:

  http = (HttpConnection) Connector.open (URL);

  invalid url parameter of returns.

  Kindly let me know what changes I need to do on my "BOLD", I am a newbie and don't know much about it.

  I'm not able to go forward because of this error.

  Thank you and best regards.

  (1) "I had a Word with vodafone CC, they told me that we must have the BES server in our company, only then my device can become."

  a BES device, so I guess I won't be able to test MDS in the Network Diagnostics tool, am I rite? »

  You are right.

  (2) "even if we need to test the WAP option in the same tool, we need to provide information such as:

  Gateway APN, gateway ip, gatewa userame, pass, source ip and source port. »

  There are (at least) two versions of WAP.  your comments are correct for the WAP 1.  For WAP 2, if you have directories of Service on the phone, it will automatically connect.  It wouldn't surprise me if you do not have WAP 2.  However, you can read the requirements for WAP 1 and WAP 2 here:

  What - in different ways to establish an HTTP connection or socket
  Article number: DB-00396
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  (3) "contains the information required to connect to a provider wireless WAP 1.x gateway.

  Legacy AT & T wireless only subscribers: Contains the information required to connect to the carrier's WAP gateway.

  does that mean vodafone will not support the WAP1.x and any third-party application cannot test this option as well. »

  No - it means settings that you find on this site are specific for att devices.  You will have to find the equivalent information for the Vodafone India.

• filter third-party applications

  Hi all

  I need to list the third-party Applications installed on the device. I tried to use CodeModuleManager, but it is all module handles. Is there a way to filter the applications?

  any help is appreciated...

  Concerning

  Thank you

  I solved the problem by using ApplicationDescriptor.getModuleName () and ignoring the modules names that start with "net_rim_".

  concerning