This 192.2.2.1 to XDB server requires a user name and password

Similar Questions

• Netopia-3000 server requires a user name and password

  Original title: Netopia-3000

  It is an error message that I receive. I do not know what it is or why. It blocks my use of the internet for what it is. If you knkow how to get rid of it, or why I get this message please let me know. Thank you

  The 192.168.1.254 to Netopia-3000 server requires a user name and password.

  Hello

  Don't know if that's exactly what you're looking for, but this thread lists how to get online using Netopia 3000. http://www.Netopia.com/support/hardware/TechNotes/CQG_121.html

  I would also post questions in the support section of the site that I listed above.

  I hope this helps!

• the wpad.home to the dsl router server requires a user name and password

  I recently downloaded some files for Silverlight and Microsoft Microsoft Security Update.  Now I started to get this message when I start my computer that says "the wpad.home of the dsl router server requires a user name and password", there also a warning that this information is requested on a non-secure server.    I hit Cancel and the window disappears and everything works, but I'm afraid that I picked up a virus and I don't want to put the password of my router in this screen.  Is this really a thing of Microsoft, or do I have some type of virus?  I run all my virus software and it found nothing, but I'm still worried.  Is any way to get rid of him?

  I have a Windows 7 64-bit system.

  Thank you.

  Beverly Graham

  It's Malware...  Thank you for the help :)

• Oracle APEX server requires a user name and password of the server said XDB?

  Hello

  After you install version 5.0 of the APEX and tries to access the page admin APEX with EPG, I am invited with a pop-window that asks you a user name and password for the XDB?

  Does somone has experience with it? What can be wrong in the configuration?

  Thank you in advance.

  Kind regards.

  Hello

  I found the problem.

  Is there somwthing wrong in the security settings.

  I re - run one of the steps with the right parameters of the call:

  DBMS_NETWORK_ACL_ADMIN.append_host_ace

  There is an error in the settings.

  Now, I'm working.

  Kind regards.

• XDB user name and password to access the page configuration EPG on a pluggable database APEX

  Hello

  I have a base shared of the Oracle (12.1.0.2) 12.

  I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

  Connected to the PDB, the registry says:

  Name of the ID Version State

  ------------ ----------------------------------- ------------ ----------

  APEX Oracle Application Express 5.0.0.00.31 VALID

  I want to configure the EPG for this PDB.

  I did the following (in this order):

  (1) race: apex_epg_config.sql

  (2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port

  (3) race: change the anonymous user account unlock;

  (4) run:

  Start

  () DBMS_NETWORK_ACL_ADMIN.append_host_ace

  Home = > ' *',

  As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)

  principal_name = > "APEX_050000"

  principal_type = > xs_acl.ptype_db));

  end;

  /

  I find myself with the APEX-based users:

  Account

  Status of user name

  ------------------------- -------------------------

  FLOWS_FILES EXPIRED & LOCKED

  APEX_050000 EXPIRED & LOCKED

  OPEN APEX_REST_PUBLIC_USER

  OPEN ORDS_PUBLIC_USER

  OPEN APEX_PUBLIC_USER

  OPEN APEX_LISTENER

  ORDPLUGINS EXPIRED & LOCKED

  ORDDATA EXPIRED & LOCKED

  ORDSYS EXPIRED & LOCKED

  ANONYMOUS HAS EXPIRED

  ORDS_METADATA EXPIRED & LOCKED

  I used the documentation:

  https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386

  When I run from the browser:

  http:// < IP address of the server >: 8080/apex

  I get the messge:

  "APEX request a user name and password XDB"

  Does someone has encountered this situation in a PDB file?

  Thanks in advance for any information.

  Thanks and greetings

  Hi Patrick,

  Laury wrote:

  I have a base shared of the Oracle (12.1.0.2) 12.

  I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

  I want to configure the EPG for this PDB.

  I find myself with the APEX-based users:

  Account

  Status of user name

  ------------------------- -------------------------

  ANONYMOUS HAS EXPIRED

  The problem is the ANONYMOUS account has expired.

  Reference: Re: XDB username and password

  I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?

  And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)

  Kind regards

  Kiran

• APEX 5.0 has need of user name and password of XDB

  Hello

  I installed APEX 5.0 in a NON - CBD 12 c on Win 7.

  When I tried to start then I get the error:

  The server requires username and password (see attachment file)

  I installed the images and the ANONYMOUS account is unlocked. I run

  BEGIN
  DBMS_XDB. () SETLISTENERENDPOINT
  point endpoint = > dbms_xdb. XDB_ENDPOINT_HTTP,
  Home = > "pc3", port = > 8080.
  Protocol = > dbms_xdb. XDB_PROTOCOL_TCP);

  END;

  Please help me

  Kind regards

  Siegwin

  Hello

  You may find the answer in the following link

  Oracle APEX server requires a user name and password of the server said XDB?

  Concerning

• I receive the "could not sign in you [access denied: 530]." Check your user name and password ' problem on Adobe Muse CC 2014 and I can not access the xml file that is supposed to solve this problem?

  I am a PC user and I have Adobe Creative Cloud Muse 2014. I received the "could not sign in you [access denied: 530]." Check your username and password "error. trying to download my muse to my ftp, GoDaddy host site I did it successfully in the past and that recently it has stopped working. I looked online at the Adobe Muse Help FAQ | Download a Site from Muse Adobe on a third-party hosting service and he said to download the ftpprefs.xml file but this file simply leads to a blank page that says / * not found * / / * not found * /.

  Can you direct me to a page to work with this file, or provide an alternative? Thank you!

  Hello

  As you have found the error [access denied: 530] This means that the problem is with access. The user name and password that you enter is incorrect or you don't have the appropriate permissions.

  I suggest you to contact Godaddy to reset the password or reset the permissions.

  
  

  Concerning

  Vivek

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• When you enter the user name and password in Windows Mail I get the following error: Server error: 0x800CCC90, error number: 0x800CCC92.

  Difficulties of username and password.

  In Windows Mail I suddenly wonder for the user name and password.  I fill them but receive no mail from mu.  I get the message:

  Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.

  Please can you help me?

  Hello

  ·         Were there any changes to the computer, lately?

  Method 1:

  (a) start the Windows Messaging mail client.

  (b) click on 'Tools' from the main menu and choose "accounts".

  (c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.

  (d) another window pop up displays all parameters associated with this account.

  (e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92

  (f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".

  (g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window

  Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• local user name and password if the ACS server fails

  Hello

  I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

  AAA new-model
  AAA of default login authentication group Ganymede + activate
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  Default connection accounting AAA power Ganymede group.
  AAA - the id of the joint session

  RADIUS-server host x.x.x.x
  RADIUS-server application made
  radius-server key, regardless of

  ----------------------------------------------

  I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

  username privilege 15 secret mypassword MYUSERNAME

  line vty 0 4
  local connection

  Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

  Kind regards

  Kevin

  Now you have the password to enable as the fall back method:

  AAA of default login authentication group Ganymede + activate

  Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

  The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

• I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  Hello

  You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.

  Link below explains how.

  Define a Site in DW

  Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials

  https://www.YouTube.com/watch?v=sHAvSbdRgu8

  Connection to the FTP server

  https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html

  Using Dreamweaver | Edit an existing remote Web site

  Concerning

  Vivek

• XDB user name and password required in the Apex 4.0.1

  Hello
  
  I installed the Apex 4.0.1 on Oracle 11 g R 2 windows 2003 R2.
  
  I installed the apex 4.0.1 using the method of the Embendded PL/SQL gateway.
  
  After installation, when I run in url = http://localhost: 8080, pls, apex, apex_admin it up a small window requiring XDB user name and password.
  
  
  I don't understand what to do to solve this problem.
  
  
  
  I installed the apex by following the steps.
  
  Help, please.
  
  
  Thank you
  
  
  
  -Apex installation steps-
  
  @apexins SYSAUX SYSAUX TEMP is
  @apxchpwd
  @apex_epg_config.sql c:\apex_4.0.1
  ALTER USER ANONYMOUS ACCOUNT UNLOCK;
  EXEC DBMS_XDB. SETHTTPPORT (8080);
  
  
  DECLARE
  ACL_PATH VARCHAR2 (4000);
  ACL_ID RAW (16);
  BEGIN
  -Did the ACL currently assigned to ' *' and give APEX_040000
  -the privilege 'connect' if APEX_040000 does not yet have the privilege.
  
  SELECT ACLS IN ACL_PATH OF DBA_NETWORK_ACLS
  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
  
  -Before checking the privilege, to ensure that the ACL is valid
  -(for example, does not contain obsolete references to users ignored).
  -If so, we'll spend the following exception:
  --
  -ORA-44416: invalid ACL: 'APEX_040000' main outstanding
  -ORA-06512: at "XDB". DBMS_XDBZ', line...
  --
  SELECT SYS_OP_R2O (extractValue (P.RES, ' / resources/XMLRef ')) IN ACL_ID
  OF XDB. XDB$ ACL A, PATH_VIEW P
  WHERE extractValue (P.RES, ' / resources/XMLRef "") = REF (A) AND
  EQUALS_PATH (P.RES, ACL_PATH) = 1;
  
  DBMS_XDBZ. ValidateACL (ACL_ID);
  IF DBMS_NETWORK_ACL_ADMIN. CHECK_PRIVILEGE (ACL_PATH, 'APEX_040000',
  'connect') IS ZERO THEN
  DBMS_NETWORK_ACL_ADMIN. ADD_PRIVILEGE (ACL_PATH,
  "APEX_040000", TRUE, "connect");
  END IF;
  
  EXCEPTION
  -When no ACL has been attributed to ' *'.
  WHEN NO_DATA_FOUND THEN
  DBMS_NETWORK_ACL_ADMIN. CREATE_ACL ('power_users.xml',
  "ACL that allows users to be able to connect everywhere."
  "APEX_040000", TRUE, "connect");
  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL('power_users.) XML ',' *');
  END;
  /
  
  commit;
  
  
  
  SELECT par_value FROM ctxsys.ctx_parameters WHERE par_name = 'FILE_ACCESS_ROLE ';
  
  
  
  CREATE THE APEX_URL_DATASTORE_ROLE ROLE.
  
  
  GRANT APEX_URL_DATASTORE_ROLE to APEX_040000;
  
  EXEC ctxsys.ctx_adm.set_parameter ('file_access_role', 'APEX_URL_DATASTORE_ROLE');
  
  
  ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 1000;
  
  ALTER SYSTEM SET SHARED_SERVERS = 5 SCOPE = BOTH;

  Hi John,.

  you're right - it should be the other way around: usually (and, if following the installation guide) configuration for OHS DAD uses the path alias + / pls / apex + as for the EPG, it's just + / apex + by default.

  -Udo

• message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

  I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

  The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

• At the opening of the PSC 3.6.3 I wonder to authenicate a user name and password to go "fasTun. In my view, that it is a virus, which I can't find, or eradicate. This coincided with my computer located in Canberra, Australia, thinking about my ISP is in F

  See the detail in the original question. Here is the text of the dialog box that appears, with the username and password fields: "the fastun.com:7000 proxy request a user name and password. The site says: "fasTun. "This means that I am unable to use the multiannual financial framework. I uninstalled PSC and PSC re-installed and the same thing happens. The problem arose after that I had been surfing the Net and goes on a German site. From that moment, my internet has become very slow. When I ran "speedtest.net" my computer would fairc Frankfurt (Germany), instead of Canberra, in Australia! Can you please help?

  This has happened

  Each time Firefox opened

  Following my fact a system restore to a point before the computer slows down. From there on, I was unable to use the multiannual financial framework to connect to Web sites. The problem is not using Windows Internet Explorer 8, or is there a problem with the speed of downloads.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  Check the proxy settings under Tools-> Options-> Advanced - tab network, the settings button.

  You probably want no Proxy, if it is set to anything else.

  See https://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Connection_Settings_Dialog

  http://fasTun.com (a record required web Accelerator / anonymizer) indicates that it is a kind of add-on Firefox. Do you see a relevant in tools-> Modules-> Extensions? Try turning it off.

  If you are not sure who this is, try to disable all questions to troubleshoot Firefox in Safe Mode .

• I did not use my PC for a while and have forgotten my user name and password. It is now necessary for me to install software on this PC, but need to log-in to do this

  Original title: Log-in question

  I did not use my PC for a while and have forgotten my user name and password.  It is now necessary for me to install software on this PC, but need to log-in to do this.  How can I better log-int?

  The software is now located on my desktop but cannot be put to use; apparently because it is not installed in a suitable place in my computer.  Using the Guest login does not work since the installation of this software is not allowed in the comments section.  Your ideas will be appreciated.

  Hello

  What account are you connected to? Administrator or guest account?

  See the following article: Microsoft's strategy concerning lost or forgotten passwords