Similar Questions

• OptiPlex 360 - graphics card working on PCI-e 1 x only

  HI: I was rebuilding a regenerated Optiplex 360 MT in a light box. Updated to Windows 8. 1. Update bios to A07 and all drivers from the chipset for later. Updated the CPU to an Intel Core 2 Duo E8500. Everything is going well so far. Wanted to upgrade the video card in the old Radeon 3450. Bought a MSI Geforce GT720 because it requires little energy to adapt to the constraints of the power supply.

  Card installed fine and works OK, except for one important detail. Executes the PCIe 1 x link, rather than 8 x (this card works max 8 x instead of 16 x, I think that because of its low energy consumption). I confirmed in X - CPU and GPU - X.

  Have tried a number of things:

  -replace the old card to confirm he was running the PCIe x 16. He does.

  -deleted the Gforce drivers to seeif that makes the difference (he didn't, still 1 x).

  -reinstall all drivers Gforce and updated at the latest

  -reran the Bios A07 update (Bios at startup show execution A07)

  -read through all the old posts I could find here and on Toms Hardware solution - see nothing beyond what I tried.

  Only thing I can think is to drop the video card in an another Optilex 360 to see if it at 1 x on this machine also works to eliminate a problem with the slot PCIe himself.

  Someone at - it any other suggestions? This card will work everything just not at more than 1 x in a PCIe 1.1 slot?

  Any ideas would be greatly appreciated. Apart from that, is not a bad little machine (considering the minimal cost to update).

  I suggest to download and install the Client of Battlenet and try World of warcraft and fiercest and Diablo3 etc..

  Also, I recommend that you install Directx June 2010 and re activation Dotnet 2.0 to 3.5 in Panel, programs and features, add windows components.

  Do the windows 27 947 updates that must be made during 10 restarts until it says is updated not more.

  It could very well be that, unless you get a X 16 card bios assumes that all other cards are X 1.

• This graphics card work on my desktop DELL inspiron 620? EVGA GeForce GTX 750 Ti 2 GB video card

  Here is a link to my desktop specs

  www.findlaptopdriver.com/Dell-Inspiron-620-specs

  www.CNET.com/.../specs

  Here is the link to the graphics card

  pcpartpicker.com/.../EVGA-Video-Card-02gp43751kr

  I'll be able to use this card with my power source for original office or will I have to buy this power supply?

  pcpartpicker.com/.../EVGA-Power-Supply-100w10430kr

  Final of the question how will these buys a positive impact on my pc?

  jojokidc

  Yes, the EVGA 02 G-P4-3751-KR G-SYNC support GeForce GTX 750 Ti 2 GB 128 - Bit GDDR5 PCI Express 3.0 video card should work fine with the default 300w power supply.

  http://www.EVGA.com/products/product.aspx?PN=02G-P4-3751-KR

  Bev.

• This card will work?

  I was thinking about an update on my HP G5120uk desktop PC. And I was wondering if this card would work on my computer?

  The map I was looking at was a

  ASUS GeForce GTX 560 810 MHz 1 GB DirectCU PCI-Express HDMI

  Hello

  I am pleased that you measured for this card. I hope that the radiator of the map is low enough for the card to fit.

  Try the Corsair CX500.

• I am a student and have this version of CC. I've updated my card number and still, it won't let me open or use one of my applications such as photoshop or illustrator. Could someone help me please? I need this to work!

  I am a student and have this version of CC. I've updated my card number and still, it won't let me open or use one of my applications such as photoshop or illustrator. Could someone help me please? I need this to work!

  check your account to ensure that your payment has been processed using your adobe id, https://helpx.adobe.com/x-productkb/policy-pricing/remove-credit-card-info-adobe-account.h tml

  If she is, log out and then back to your desktop app cc using this same id adobe, connect and disconnect activate Cloud Creative applications

• HP Pavilion Elite e9180t CTO D: Will Graphics card work with my desktop computer

  I have a HP Pavilion Elite e9180t CTO Desktop PC - AV321AV-ABA e9180t

  Windows 7 Ultimate 64-bit Service Pack 1

  Intel Core i7 CPU 975 3.33 GHz

  ATI Radeon HD 4850

  Motherboard: TRUCKEE 1.04

  System BIOS: 5.29

  To activate the ray-tracing on the GPU, Adobe After Effects requires a graphics NVIDIA and CUDA 5.0 or later approved.

  An NVIDIA representative recommended a GEFORCE GTX 780.  The PNY Graphics Card VCGGTX7803XPB video will work with my desk?

  Hi there @LeoOfMars
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking to find out if a video card is compatible with your information system. I'm happy to help you with that.

  The main reasons to be sure of are normally feeding you, special (to THE) cable power supply for the graphics card, on the motherboard compatible expansion slot, the drivers for your operating system, another thing to know is the physical size of the map, for moments of cases.

  Looking at the specs of your system and the motherboard by default, I listed the type of slot of power and expansion.

  HP Pavilion Elite e9180t Desktop PC product specifications and configurable Options

  Output power of power: 460 Watt

  HP and Compaq desktop PC - specifications of the motherboard, IPMTB-TK (Truckee)

  Two graphics PCI Express 2.0 x 16 (for graphics cards)

  Go to the video card you are looking at:

  GTX 780 3072 MB GDDR5 PCI-E 3.0 OC Custom cooled graphics card

  Input power: 1 x 8-pin auxiliary input aux input 1 x 6-pin
  Bus type: PCI-Express 3.0 16 x
  
  System requirements:
  Mother compatible PCI Express with a slot of chart double-width x 16
  Power 600W minimum (with a minimum of 12V current rating of 42A) 3
  300 MB of available disk space
  2 GB of memory system (4 GB or more recommended)
  Microsoft Windows 8, Windows 7, Windows Vista, or Windows XP Operating System (32 or 64-bit)
  DVD-ROM drive or Internet connection for installation
  DVI, HDMI, DisplayPort or VGA compatible monitor

  So on a quick inspection of both devices there are three problems, so this card will not work on your motherboard or with the current power.

  I hope this helps.

  1 x 8 pins, entry to aux in, 1 x 6-pin

• 2356ni P6: p6 2356ni and ti, zotac GTX 750 HP it will work?

  Hey my office's hp p6 2356ni, (mini-tower case). I want to use the chart zotac gtx 750 card ti. I would like to know if these two will be comapible in terms of PCI slot, the size and power. I have a UPS with a maximum capacity of 500 will

  Thank you.

  Hello

  Please report the number of HP for your PC product. How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers. This will allow others to review your question, make suggestions and review your answers. It is usually the best way to get help.

  The 500 inverter WILL have nothing to do with the NVIDIA graphics card.  However, UPS, run time may be shortened according to the overall power load.  If the 750 replaces a higher power graph card then the operating time could be extended.

  Wil you need to open your PC and do some measuring inside.

  Not every graphics card will work in any PC.  Know what the return policy is before you buy anything.

• This card will fit in my XPS 8700?

  I recently bought an XPS 8700 and thought to upgrade his graphics card. I'm looking at one is the EVGA 4 GB Geforce GTX 770 here:

  http://www.amazon.com/EVGA-Superclocked-Dual-Link-Graphics-04G-P4-3774-KR/dp/B00E5AEIKE/ref=sr_1_1?s=electronics&ie=UTF8&qid=1382478542&sr=1-1&keywords=EVGA+GeForce+GTX+770+Superclocked+with+ACX+Cooler+4+GB+GDDR5+256-Bit+Dual-Link+DVI-I%2FDVI-D+HDMI+DP+SLI+Ready+Graphics+Card+04G-P4-3774-KR

  The card is listed with the dimensions of 12.9 x 9.5 x 2.9 inches. After looking at the inside of the case I am afraid that this card does not. Can someone help me with the question of whether this card will fit in a case of XPS 8700?

  Either by the way, I am aware of the problems of compatibility with the 8700 UEFI and have already bought a beefier power supply for a new card.

  Thanks for the help!

  Hello NinthLayer,

  Dell XPS 8700 has never been tested with the EVGA 4 GB GeForce GXT 770. However, few users have installed nVIdia GeForce GTX 770 2 GB successfully on their XPS 8700. The nVIdia GeForce GTX 770 2 GB size is 10.3 "x 4.3" x double Slot. So before you buy the card, I suggest you take the computer to a local store and check if the graphics card works on the system.

  Please note: the EVGA 4 GB GeForce GXT 770 requires minimum of POWER supply 600W with PCI-E power 2 connector x 8 pins.

  I hope this helps!

• This card will suit my Precision 490 workstation?

  First of all, I want to thank Hunter for this thread and JMichael (and all) for reactions/answers interesting and very informative!

  I bought a refurbished Dell Precision 490 work coming arrived today. (yay!) The one I bought has the following specifications:

  • Dell Precision 490 workstation cases
  • Card mother Dell
  • Two processors dual-core Intel Xeon 2.0 GHz each for Total of 4 units of execution
  • 500 GB SATA hard drive
  • ATI FireGL V3350 video card with DVI output double
  • 750 watts power

  I bought (after consultation with Tiger Direct) from NewEgg.com (renovated) graphics card include:

   01 G-P3-1371-RX of EVGA GeForce GTX 460 (Fermi) 1 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card

  In the specifications of the card it says that it is "double slot" However, the specs on the 490 show that it has a PCI-e 2.0 x 16 slot. The guys from Tiger Direct (after looking at the specs for the 490) said he would do. So my question is - is this the case? (no pun intended... well, maybe a little )

  In addition, given that the map is a refurb, it comes not with cables or CDs with drivers. I found the article on EVGA website and saw that he (originally) comes with two cables for the power - it looks like two cables of 6 pin Molex (3rd picture from the left row, at the top), it also says:

  Requirements
  At least a 450 Watt power supply.
  (Recommended minimum power supply + 12 volt current rating of 24 amperes).
  Two dongles available power of PCI-E 6 pin

  And people to revisit the issue on NewEgg.com said that they had to order power cables separated - then... I ordered two of these. Those who will work with the Precision 490 and this card?

  Additional information: the 490 I bought has the following:

  • 2 slot PCI-e x 8 wired as x 4
  • 1 PCI - e x 16 graphics slot
  • 2 slots for 64-bit / 100 MHz PCI - X with support for 3.3V or universal cards
  • 1 slot PCI 32-bit / 33 Mhz

  I really am crossing fingers and toes that they will work together, because even if I don't play (except SolSuite Solitaire lol) I have do many 3d work in 3dsMax, (CUDA is so extremely important!), Daz3d and also a lot of work in the Adobe CS5 programs, so I had to switch to the Precision 490 workstation (am also installation of 8 GB of RAM (4 x 2 GB each) for a total of 10) GB of RAM. Hoping it will be a monster and my models will look stunning in my pictures!

  Any help is greatly appreciated!

  Given that the card mother a 490, 3 PCI-E slots with the 16 X being in the Center, I would say that Yes it will fit in the slot.

  If it fits the length wise or past the heat sinks I have no idea.

  
  larger image and
  larger image and

  Comments

  
  larger image and
  
  larger image and
  

  

  Dell Precision 490 Workstation Motherboard GU083 Dual CPU Socket
  [GU083] GU083

  220,00 $89,99 $
  Save: 59%

  There are currently no product reviews.
  
  NOTE: Comments may require prior approval before they will be displayed
  

• Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

  My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
  Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
  and fall at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  -----------------------------------------------------------------------

  Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Transmitter does not yet support this card? Apple pays

  I received a message after trying to add my card to pay Apple and once I pushed next to add a message came and said

  'your transmitter does not offer support for this card' has anyone else had this problem? Or went to their bank? I went to my Bank and talked to my banker, and she told me that they were on a waiting list to get on Apple pay! Could this be why it does not work? It then I hate my Bank so badly! I can not even use my card on itunes

  Sweet Babygirl 1991 wrote:

  .. I went to my Bank and talked to my banker, and she told me that they were on a waiting list to get on Apple pay! Would it why it does not work...?

  Yes - which explains why you currently cannot add the map.

• a vision tek hd 5450 graphics card work in my PC p6213w?

  I wonder if the vision tek hd 5450 graphics card work in my Pavilion p6213w. I wonder if I should find a different graphics card instead. I know I have to buy another power supply, I just want Advisor be cause I play several

  Online games and doing the research for the documents from the school.  I also use my PC to watch movies and television series like weather reports edge chipset does not allow some of the games and videos to be played correctly anylonger as they changed their policy.

  any suggestions for this help is taken into concideration. Thank you very much

  Hi Noel,

  Vision Tek HD 5450 video card will not work in your desktop PC without an upgrade of the power supply.

  Your PC came with a 250 Watt POWER supply and which does not respect the minimum of 350 watts required for the video card Vision Tek HD 5450. Here is a link to the plug of your PC. If you upgrade the PSU, the card will work in your PC.

  I recommend that you buy a PSU that has at least the ATX12V v2.2 / EPS12V v2 specification. Here is a link to a document on the Newegg.com web that shows some power supplies that work. Stick with major brand names such as OCZ, Corsair. The second level and no name power supply could disappoint you even if they are less expensive (which assimilates sometimes so lower quality).

  Best regards

  ERICO

• HP Pavilion 500-023w desktop: Hp pavilion 500-023w can run this card EVGA GTX 750 Ti SC (compatibility?)

  Hello very good day my question is if my pc is compatible with this card EVGA GTX 750 Ti SC

  I want to ensure before making the purchase

  PC

  Intel Core i3-3240 CPU @ 3.40 GHz

  Foxconn
  Model 2ADA

  Ivy Bridge chipset

  PCI Express x 16 Slot

  8.00 GB of RAM DDR3 @ 798 MHz

  Integrated Intel HD graphics

  10 64-bit Windows Home

  Marc, welcome to the forum.

  Yes, I think that your motherboard should be compatible with the video card.  The card requires UEFI in the motherboard and your mother should have.  Just be aware that the specifications concerning the State of the map that it requires only a power supply (PSU) with 300W power.  Many members have reported that it is rather 400W.  You can try with the current POWER supply, but if this does not work I suggest one made by Corsair.  I recommend at least 500W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• Portege R100: 4GB SD card works very slowly-> unable to format

  Laptop works fine, no problem when using 1 GB SD card. What SD 4 GB inserted PC card works very slowly. Finally, I am able to run the software Toshiba Format SD memory card (download the latest version). It does not seem to recognize the card of 4 GB. Unable to format. When later tried with 1 GB card, everything works fine.

  If someone was able to get a 4 GB SD card?

  I'm not sure if the laptop software needs a patch, or if the 4 GB card is not fully compatible with SD cards standards, however it was purchased from reputable suppliers.

  Graham

  Hello

  I think that it s nothing wrong with the software, but the SD card is simply not compatible 100%.
  In recent times, the SD card sizes are rising rapidly.
  I think that the card reader and the software were not intended to manage this big SD card like this.

  How to buy an external SD card reader?
  These devices are not very expensive and I think the new generation should be able to also handle 4 GB SD cards.