This computer can't connect to a homegroup

Similar Questions

• This computer can't connect to the remote computer

  I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

  • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
  • I checked the services and that they perform a remote procedure call (RPC)
  • Restarted the server several times.

  I can remote into other servers of this machine if I log in locally.

  Please advise,

  Michael McDaniel

  301-763-1160 off.

  Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

• This computer can't connect to the remote computer. ONLY 2 people it out 200 users...? baffeled by WindowsXPe Thin Client RDP connection

  Here's the situation.  We have 2 TS servers running WIN2K3 and 200 users with Thin Clients.  We'll call it the first server A and b of a second.

  They normally connect to an IP address and they will be directed to the server A or B according to the load.

  However; users can still select the specific TS server, they want to connect to.

  If user 1 and user 2 cannot connect to Server B.  They get the error listed above in the title.  However the user 1 and 2 can connect to A server.  If they say:

  192.168.123.2 the two of them get

  192.168.123.3 the two of them cannot get.

  I deleted the user de.3 A profile and it still can't get.  I have checked no orphan key inHKEY_LOCAL_MACHINEMicrosoft\Windows NT\CurrentVersion\ProfileList

  I checked the settings in TSCC. MSC, I' checked worm Licensing by user and they are good, I gave them full administrator privileges and still not pass via the serveur.3, they adhere to all groups within the ORGANIZATIONAL unit that they can connect to TS, they were able to connect to her very well this back on Wednesday.  It is not a firewall issue and port 3389 has been verified in the case otherwise he would not just these two on each CT they try.

  Again, they can get utilisant.2.

  In the event de.3 Viewer I can see users connected CORRECTLY but then it pop their right.  There is no other error message when connecting, just the success Message in the security log.

  Let's bounce servers tonight so I'll have to turn it back on and I pray that they can later log on this server, but I'm baffeled.  Why only 2 people would receive this question and most (not sure how many others there may be, but I know 30 people connected today on this server and worked out of it) people are not getting an error.

  The thin client on their desktop is not the issue, because the error follows them any CLIENT LÉGER, they are connecting from.

  Short of this re-boot and short to delete accounts and recreate them, ideas?

  Found the problem.  I did not remove the key to all the indicated previously.  I should have done that for this user since her CentralProfile Key was empty when she had to be filled in by the system.  Removed his Key specific SID for listed above point and viola.  User can connect.

• "Video card in this computer can't play themes."

  I've just upgraded from Vista to Windows 7. I tried the Vista screensaver and I read that the only way to get it is to install Windows Live Photo Gallery > go in the screen saver settings > Setup > choose where are my photos and choose a theme. My problem is that I don't get the option of a theme. I am told "computer video card cannot play themes. #1, he played the themes in Vista. #2 I have a card ATI Redeon HD 4350. :

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I am very happy! There are a lot of people who have this problem, and in not a place, I saw someone who has managed to solve! Will try to dig in tonight when I get home from work.

  Is it possible to get advice for example a guide 'how to do '?

  Will do a write-up on it Johan!

  Update

  And it's here:[FIX] 'this computer's video card can't play themes' Message in the box in WLPG Screensaver settings dialog

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• I bought the photo College as long as on the photo gallery I down loaded it does not find low .i loaded in my other computer, no problem, I searched in this computer can not find it helps.

  I bought the College picture for my other computer, no problem, I tried to do the same thing with yhis computer can't find it. I went where it should be, but it isn't here.

  Hello, Dorian,

  If you have downloaded in Internet Explorer, go to tools, click View downloads, and you'll see the directory where it has been downloaded. Not visible? Look down, in the bottom left of the word 'options', click on this and it will display the current default folder for downloads, but after writing it down, you can change it to any folder of your choice (mine is C:\__Downloads - always watch first!).

  If you use another browser, go to this toolbar for browsers and search for the download folder and display it. You should find similar settings for the other locations.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• I tried to reload Nf6 Photoshop I get a response of "that s/n has no record of this computer" can you help me get it reloaded?

  I had computer problems and my computer was formatted and I lost everything, pictures, programs, videos, reports, etc., I tried to reload Nf6 Photoshop... I get a response of "that s/n has no record of this computer"... or something like that... can you help me to get reloaded?

  Your serial number appears on your account page?

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  NOTE: this is a public forum, so don't post NOT your serial number here!

  > or something like that

  Displaying the text of an error message will help the people to help you

• As this computer remote desktop connection cannot connect to the desktop remotely

  Sometimes, I try to connect to my desktop and I get an error and sometimes it works and sometimes does not.

  Why is this?

  This could happen if you use a Wi - Fi connection with network problems, if some of the data is lost in transit.
  You can run this command to see if there is packet loss:
  ping-l 512 f - n 100

  It will send 100 queries and should receive 100 responses from the remote computer.
  If get you all "Request timed out" messages, then this might be a firewall is not blocking the pings on the remote computer.
  If get you one or more "Request timed out" messages, then this might be a network problem.

• my computer can't connect to firefox

  How can I get firefox to connect to the internet?

  What you set as your home page? https://support.Mozilla.com/en-us/KB/how+to+set+the+home+page

• HP ENVY 700-059c: 10 Windows cannot set up a homegroup on this computer

  The message I get when I try to put in place a homegroup on this computer is "Windows cannot configure a homegroup on this computer". I tried everything that was suggested on troubleshooting of the forums that I searched the web on this problem but without success. I am trying to create a network with your computer and a Dell 64 bit of Windws 10 laptop.
  Two computers on the same workgroup and I can set up a homegroup on the Dell, but when I try to join the homegroup on the HP I get the same error message. It has been suggested that I have delete the Group residential Dell and put in place a new homegroup on the HP, but HP won't let me set up a new group of residential. Where am I wrong?

  As I said in my last post, I had no chance to get all of my network to the top, but after going through the fixes proposed by WAWood I realized that fixation on the establishment of a group residential wasn't getting me anywhere. I decided to search the web forums for a solution for the operation of "Peer Networking Grouping" of service, something I had not been able to do (strangely enough by clicking on the button 'Start' a billion times has absolutely nothing) since this mess began. Here are the procedures that seemed most likely to have success. First test was to change the registry using a suggestion of:

  http://www.tenforums.com/network-sharing/9691-computer-can-not-join-create-HomeGroup.html

  Modify the key to register IPv6 to enable IPV6
  ==========================
  a. Click Start, type regedit in the search bar and then click regedit in the list programs.
  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. look for, and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.
  d. double-click "DisabledComponents" registry key and change the value to 0.
  (If the key does not exist, please create the above key and assign a value of 0)
  e. exit the registry editor and then restart the computer.

  So far no change. On the next dose of:

  http://blogs.technet.com/b/Win7/archive/2011/02/16/quot-peer-name-resolution-protocol-quot-service-could-not-be-started-and-HomeGroup-is-not-working.aspx

  1. from the high CMD prompt, type the following command:

  net stop p2pimsvc /y

  2 delete the following file:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst '.

  3. restart the computer.

  These two patches, apparently has not changed anything, but when I went back to Services and double clicked on grouping network of peers, and then clicked on the 'Connect' tab I found that the "Local System account" is selected and the box "Allow service to interact with desktop" was checked. Since I knew my many visits in this tab that it wasn't the way it was configured initially, I checked the properties of the service directly under it (Peer Networking Identity Manager) the tab 'Connect' showed that this account has been selected, and the term "Local Service" was in the right text box to the right of this account. In the two boxes just below this text box were two boxes labeled password and confirm password boxes contained 14 points. I decided it looked a lot like what I remember that the log on tab of the properties of "Peer Networking Grouping" dialog box has been initially configured. I returned to the journal of Peer Networking Grouping tab and made properties the following steps.

  Chose "This account" and deselect "Local System account".

  "Local Service" text typed into the text box next to "this account".

  Delete all the points in the 'Password' and 'Confirm password' boxes

  Clicked on apply

  Clicked on the tab general and click the button start (Yay he actually started)

  Restarted the computer

  From there on, I was able to set up a homegroup, and then I was able to reach him this homegroup on my laptop connected wireless and viola, I have a network.

  Thanks to WAWood for set me on the path to try to get the 'Peer Networking Grouping' service running as my ultimate goal.

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can this computer run 64 bit?

  I'm going to buy a Dell Optiplex 745 and wanted to know if this computer can run Windows 7 Pro 64 bit.  Here are the specs.

  4 GB OF DDR2 RAM
  Processor Pentium D Dual Core
  750 GB hard drive
  ASUS ATI Radeon HD450

  Can only run a 64 bit OS?

  Also should I be worried even obtain 64-bit?  What I use my computer for is Minecraft, YouTube and Twitter.  I don't know the difference between 32 bit and 64 bit so if you could also explain that it would be greatly appreciated.

  Yes, he is capable of 64-bit:

  http://Ark.Intel.com/products/27515/Intel-Pentium-D-processor-915-4m-cache-2_80-GHz-800-MHz-FSB

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller. Also, if you decide to switch to Windows 7 64 bit in the future, there is no way to upgrade from 32-bit Windows, clean install only.

• How to remove Cloud Creative sign in the data, but the computer can not be used.

  I have uninstall creative cloud app before disconnection. I want to remove the activation key for the computer.

  What can I offer? Communicate with staff support from Adobe?

  Thank you ~.

  Reinstall the VAC then disable this computer after you connect

• Can not connect to web access SX20 after factory reset

  Hi all

  I have a problem when I reset factory SX20. I finished off SX20, then hold the power button for 10 seconds until what he puts to Flash. Then press the power button twice. I don't know it have already been reset factory state yet.

  But after this, I can not connect by web access. I can ping to SX20. but I can not connect on the Web or Telnet and I don't know what are the admin user and the password.

  can you help me for this?

  Please, help me to check it out.

  Thank you all

  If you are able to navigate to the login screen by using a web browser, the default username is "admin" without password.  Telnet is disabled by default.

• Error 'this computer cannot connect to a homegroup. " How can I connect my 2 parts forming a home network?

  I'm trying to connect my pc with my pc upstairs downstairs (both HP pcs. 1pc is Vista, the other is 8.1). Now, I guess I'm on the right track to connect both PC and trying to establish them as a group residential when I get to the page of the homegroup, it reads 'this computer cannot connect to a homegroup' Finally I get 'service Homegroup provider is not running.

  How can I connect my 2 parts forming a home network?

  Thank you DVSMSC I missed it - you have reason. Homegroup is introduced in Windows 7 and works in 8 / 8.1 / 10 also, but not back to Vista.

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658