THOMSON RCA RD900W multimedia receiver

Similar Questions

• hear audio through de335 receiver tv

  I have a Samsung smart tv, and I'm hearing the sound of the TV through my Sony de335 receiver. the TV has an audio output with a 3.5 mm jack, but whence the red and whites taken RCA plug the receiver? or I'm doing this all wrong?

  Hi buddyde335,

  Welcome and thank you for considering SONY community!

  We apologize for the late response.

  Please see the link below for more information on how to connect your TV to your receiver from SONY:

  • https://us.en.KB.Sony.com/app/answers/detail/A_ID/30194/c/65, 66/p/41901,43145,43948 /.

  I hope this helps.

  Kind regards

  ^ Ron

  If my post answered your question, please mark it as "accept as a Solution.

• Portege R400 - A2DP profile does not work using BT Stack 5.10.12

  Hello

  I try to get my Toshiba R400 connected to Logitech wireless music station. I can't find the camera, but when pairing, it says something like error when connecting with remote device, please try again. He doesn't want authentication in contrast to my pda, where the pairing works very well.

  This only occurs with the A2DP profile using the headset profile, the stack ask me to press a button on my headset to confirm that everything is working. But there is no button to confirm on a multimedia receiver. It's not really a helmet. So I'm stuck to hear the ringing sound but no way to confirm. I don't want to use this profile anyway because I want to listen to music, then I tried with another battery. But how do I do this? When I uninstall the battery, all 'bluetooth' went into the Device Manager. I can't the device at all.

  I use Vista Ultimate 32 Bit, and 5.10.12 BT stack. It would be great if someone can tell me.

  Thank you!

  What you can try is to check the following parameter:
  -Mouse-right click on the systray icon Bluetooth-> Options...-> Security-> Custom Level-> Mode: level of link applied security
  Try Setup again. You can switch back to Standard security, if your installation was successful.

• DSX-S310BTX compatibility with RM-X60M?

  Does anyone know if the new DSX-S310BTX Digital Media Receiver is compatible with the RM-X60M remote control? I called Sony, but they said the RM-X60M is not listed as an accessory for the DSX-S310BTX. They said which mean that it is is not compatible, but they could not guarantee compatibility. All advice is appreciated.

  Thank you for your post and welcome to the user discussion forums,
  The digital multimedia receiver DSX-S310BTX is not compatible with the remote control RM-X60M.

• Connecting a laptop to a WRT160N Linux

  Finally got round to install a WRT160N over the weekend.

  I got to the top and running with a variety of hardware (wired and wireless), but I can't get my son portable Linux to connect.

  Is there a problem with Linux connectivity to WRT160N (V1) routers?  Are there drivers anywhere?

  The Linux version in question is the latest version of Fedora 10. (Sorry I'm not Linux guru, my son is)

  The same laptop connect when it is initialized with Windows.  I have other material connected with success - a Sony's WiFi multimedia receiver and a Wii, as well as a laptop under Vista.  I can't get the laptop Linux to connect.

  I tried setting the rear connection of type N mixed b/g.  No improvement.

  Is this a problem of driver or setting?

  This error message you get when you try to connect to your network when it is initialized with Linux... If you have the connection when it is initialized with Windows is not a router issue...

• I can't watch the analog inputs in hearing CC 2014

  I have a M-Audio M-Track more USB audio interface. Digital interface output is connected via coaxial RCA to my receiver. The analog inputs normally receive a signal from a phono preamp line, since I transfer a lot of vinyl to the computer to listen to in my car and my phone.

  The thing that I'm trying to understand is why the hearing does not allow me to monitor the analog inputs. I can monitor them very well when I use Studio producer One of the Presonus. But the hearing does not allow me to follow, although it does not record the signal and then I can read.

  The audio device at the hearing, I've chosen is the ASIO of M-Audio driver. Under audio mapping I can't select anything other than the analog inputs and outputs. It is not an available digital output, which could be part of the problem, perhaps hearing does not allow the signal to convert analog inputs to the digital output. However, as I said a producer Studio control perfectly well, so the analog/digital real-time monitoring is allowed by the device.

  My hardware is PC with Windows 8.1 Pro 64 bit, i7 3930 k, 32 GB RAM, card mother Asus P9X79 Pro, and some other stuff that wouldn't really make a difference in this problem.

  Any ideas?

  Thank you

  Sebastian

  Try recording in multitrack view and by clicking on the little 'I' (Input) button at the left end of the track.  It should route the signal from input to output for monitoring.

  I have the background track M, no more, so I can't try it but I think it should work but with a bit of latency (which shouldn't be a problem since you're not dubbing.

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• I received a phone call from a man by the name of Thomson. He said that I was risking to have my computer crash. My security proovider is AVG and they say my computers are save.

  Received phone call from a man named Thomson.  He said he was with Windows in the United States and Florida.   Was given the phone number of 315-506-4544.  Asking for help with problems with my computer detected by Windows.  He said that I was risking my computer and overwriting of files.  Very difficult to understand.  He asked I right click on my computer and highlight all the files with any questions.  I didn't trust this person so I hung up the phone.  I continued to return calls 4 - 5 times.  This doesn't seem to be a legitimate caller.  My security proovider is AVG and they say my computers are recording to date.  Was it a bogus scam

  Hello

  Its as SCAM!

  The number is either usurped or re-directec to another number or even another country.

  -506 (315) - 4544
  http://www.numberinvestigator.com/phone/315-506-4544.html

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• EA6500 will not send/receive the cell text and multimedia

  I just took an EA6500 on clearance.  It works very well for all applications except text messaging.  I can send and receive texts and multimedia on all other WiFi connections I use, but it does not work on my EA6500.  Is this standard, or is there a place I can change the settings?

  We are with US Cellular by using an old Samsung (not sure of the model), two S7s and an iPhone 6 (more or sPlus... not sure), more on WiFi an old M bike, only.

  Thanks for any help on this.

  Natalie

  Cell phones use the cell signal from the phone to the normative texts and the data connection of the phone for multimedia content.  None of this happens on WiFi.  It does not work on all other WiFi connections, you are confused.  Text works when you have cellular signal and the works of content media when you have a valid data connection.  Maybe it would help if there is an application that transmits over the internet, then on mobile networks, but not using the original text/sms on the phone app.

• Lost multimedia all-in-one keyboard usb receiver

  Hello

  It is possible to replace the USB receiver? Or I have to buy a new package?

  Try here.

  Replacement hardware, etc.

• Can't send or receive messages MMS (multimedia messages)

  I recently got a new Motorola RAZR V3 phone and signed up with T-Mobile service.  I am not able to send or receive any MMS messages (MMS).  I used the T-Mobile device configuration http://tmobileuspublic.wdsglobal.com/ Web site to try to set up this phone.  After following the instructions, the phone displays the following error message.  'Exceeds the maximum limit.  Cannot add the new session web profile. "On the phone, I went to Menu > WebAccess > Web Sessions and 10 points listed there.  I'm not able to find an option to delete all the recorded sessions.  At this point, I am lost on how to work around this problem.  Any help to fix this would be greatly appreciated.

  aliinaz-

  Have you tried a Master Clear? Make sure that you back up your contacts on your PC before you do.

  ~ SnappyD

• Can I plug two Airport Express units with ethernet cord and have a third Airport Express Terminal receive airplay music wirelesslly? In other words, can I combine a Wi - Fi network and roaming?

  I have an undesirable on the 1st floor, connected to the cable modem Ethernet event. I want to connect that AE to an another AE on 2nd floor with ethernet cable AND have a 3rd AE on the 1st floor to receive music through AirPlay wireless. I thought that linking the two first AEs with ethernet would improve the performance of web site on my iMac desktop, which is on the 2nd floor and connects to the 2nd floor AE via wifi. The EI the first two are newer model (MC414LL/A); the 3rd AE is old model (MB321LL/A) and is connected to a stereo Bose with a mini-jack to RCA cable double cord. I tried to set up this network using AirPort Utility, but have had no success. I don't know if it is possible to do what I want to do; and if this is the case, I don't know how to set the various parameters for each AE using AirPort Utility. I've temporarily implemented a purely wireless network; Do not connect DO NOT the two AEs with ethernet and everything works. I would enjoy my plan as above, or if I hold with purely network wireless. Any help would be greatly appreciated.

  Using ethernet network roaming between the two floors is a much better idea than anything wireless.

  The installation should be automagical if you start with the two AE plugged in by ethernet.

  It must be configured in standard roaming with identical names wireless.

  If you have any questions... Please, just after the airport utility screenshots of the configuration... but

  An express train is probably the router? You must confirm this.

  The second express is so configured in bridge... It's on the network tab, disable the bridge mode.

  

  Without thread is set to create a wireless network and simply use the same name and the same password as the other Express.

  As it should be automagical when you WAN on the second AE plugged into the LAN on the first AE.

  Wireless and then extend to will also be installed enough well automatically even if sometimes it works better in a client that extend wireless mode.

  See the Client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• Installation of a multimedia Audio Controller

  I recently got a new computer, used by a school which has swept clean from the computer.  The desktop PC is

  a HP Compaq dc5100.  I installed Windows XP Professional 2003 on it.   I've updated most / all the drivers on that, except when I go to Device Manager, I see that there is a yellow exclamation next to OTHER DEVICES.   As such, there is a yellow mark next to "Controller Audio." multimedia

  Now, I tried to do a right click on it and make a "update driver." However, he returned with an error that says, "the hardware was not installed because the wizard cannot find the necessary software."   Then, I put the installation disc in and I tried to load it from there, but received the same error.

  I uninstalled and rebooted the system, thinking that it can recognize this and install it, but that did not fix it or the other.

  What else can I try?

  Mark

  Hi, Mark:

  The game of recovery diskettes were made when the PC was made, which means that all the drivers are working, but they will be those originally supplied with the PC.

  You will need to install XP SP3 because I'm sure that the operating system recovery disks installing XP SP2.

  You can then run the windows update and download and install all security updates. Under the hardware section of windows update, there may be newer drivers to install.

  Otherwise, I wouldn't worry on this subject.

  Paul

• AE last gen and stereo receiver: coupling with amplified speakers

  Hello

  I have a TEAC A - H01 receiver

  

  I have also a speaker: WIFI Libratone Zipp powered only no Bluetooth.

  

  Finally, I have a last gen Airport Express.

  Here's what I can do: I can use my Libratone with my iPad air2 and Airplay for dissemination and to have my sound turntable through a custom cable.

  I have a Denon Platinum coupled my Teac.

  I would like to know if it is possible to use my AE to the audio stream of my TEAC to my Libratone wireless.

  This TEAC has a DAC, USB - B, RCA Coaxial, optical Tos-link entries. Also two analog audio input RCA.

  For now, my Denon is coupled to the TEAC via a preamp Cambridge then the sound goes to my Zipp Libratone with a custom cable.

  The problem is that the output signal must be low on my TEAC to avoid distortions, and I adjust the sound with my Libratone.

  Anyone with experience could share some tips?

  Thank you very much

  Jean-François Laferté

  Terrebonne Quebec Canada

  I would like to know if it is possible to use my AE to the audio stream of my TEAC to my Libratone wireless.

  This TEAC has a DAC, USB - B, RCA Coaxial, optical Tos-link entries. Also two analog audio input RCA.

  Sorry, but no. The AirPort Express base station Terminal is an audio output port. He cannot receive audio inputs of the Teac or any other audio device.

  However, you can use the Express to the sound of flow FOR the Teac.

• Satellite Pro 6050 - out port (RCA) TV does not work XP

  I received a Satellite pro 6050 which had Vista installed on it, I downgraded it to XP, but the port RCA no longer works (worked on vista).

  Can anyone suggest a solution?

  Thank you

  Hello

  > I have the display mode to extend the desktop on the second monitor, and I think it sends the output SVGA mailed rather than the TV output
  This could be the key; try to use the FN + F5 keys until you have to spend on TV and not on the external monitor.

  Good bye