three strangers on my gateway pc

Similar Questions

• Requirements Gateway - objects on the front panel

  Hello

  I'm about to start using the gateway requirements and I have a few questions to help me go...

  1. If I create a vi on a machine without RG installed and then move it to a machine with the Receiver General installed, will be always recognized tags?

  2 - RG recognize the syntax [covers XX] if it's on a façade and not the block diagram?

  Thanks for your help.

  Darren.

  I know a little RG.

  1. Yes.

  2 RG will scan the three areas of a VI for references: VI Description, control/indicator Description and diagram commentary (free labels). That's why he won't see a reference on the front panel (for example data text or text of the label or a caption).

• Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

  Hello

  Good evening everyone.

  I had a problem in Routing and remote access on windows 2003 server.  This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.

  three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24

  Three cards of the NETWORK adapter installed on the server as with the IP - next

  NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.

  NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)

  -3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.

  Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...

  So, how do I access the internet to another two network also?

  I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?

  Here is the result of the current track...

  D:\Documents and Settings\Administrateur > route print

  IPv4 routing table
  ===========================================================================
  List of the interface
  0x1 ........................... MS TCP Loopback interface
  0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
  niport
  0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
  iniport
  0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
  2 miniport
  ===========================================================================
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
  192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
  192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
  192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
  192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
  192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
  192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
  224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
  224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
  224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
  255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
  255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
  255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
  Default gateway: 192.42.161.112
  ===========================================================================
  Persistent routes:
  None

  Sorry if I'm not able to explain properly. Please let me know if you have to explain more about it...

  Thank you all.

  Mahesh

  Hello Manu,

  Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• Can I do a restore to factory on a gateway MX-6349 w/o the disks?

  A friend recently gave me a portable MX-6349 Gateway with Windows XP Media Center Edition 2005.  The Windows XP sticker and the product key are still intact at the bottom of the laptop.  The laptop has a large number of software and spyware malware on it.  I want to do a full factory restore.  However, I tried to run the system restore, and it asks me for the discs.  I don't have these disks.  Is it possible to do a restore without them?  I contacted gateway for information on disks, and they said they no longer provide disks to restore for computers over three years.  Any help is greatly appreciated.

  Hello

  Unfortunately, you cannot restore factory on a bridge without disc.

  For your reference: http://support.gateway.com/s/software/Medialess/MLXPH1/MLXPH1su10.shtml

  Hope this information is useful.

• Windows family vfista premium is broken, but not the dell printer. products do not work for three months windows

  I have installed windows securitity, now three months of windows products don't work, it's time I'm asking for help, I lost the mail, internet, do not download, made-it is not working it's time I am asking for help, I lost the mail, internet, do not download, made-it doesn't work nor does she Live Gallery windows, it will not udate. the entire system is ruined, had to use incredimale and foxfire, re-installed Pack2, now it of really a mess, had too use sysytem restore dell, now say that dell drive hard has problems, spending 6 weeks with lasy tech, lost everything, so now what?

  proven system repair, nothing, tried to reinstall, he left 90 percent of the old stuff still there, I can't get downloads, patches, nothing that is microsoft works.

  I have to clean the machine and get 7, will operate 7 or have the same problems? I was usig stinger, ad-aware and spybot just to clean the machince, and I always get more trogens then Troy! husband uses a gateway on the same router, never spent a McAffee and a has no problem, every day it's something new, when it downloads, it said: it is the missing pieces and will not work.

  This is the third time I have tried to save my stuff to say-connected usb, hard drives, seven is better, the disk of vista that I messed up? It worked fine until I used the basics of microsoft.

  Thanks, I'll check some of your links, I was up all night with Dell, they did all the tests imaginable and agreed it was the vista software and not a virus or malware, they also checked with their people for the compatibility problems with windos 7, since this is the third time I would be re - install it and I went to buy windows 7 , he already has accompanied me throughout the entire upward and the account if I need help or advice, he will be free.

  So tonight I'm going only to remove my sweet that I bought or have the disc, then personal stuff like photos etc and I will do a clean install. I also had a new manual of windows 7 from microsoft for reference, thanks for the time, effort and helps you offered, some of these links might help me as I install it.

  Once again thnak you.

  Which

• WRT1900AC seems to limit myself to 10 Mbps when the gateway computer gets directly 100 Mbps

  My gateway xfinity is a TC8305C. I "bridged mode".

  If I have my computer directly in the front door, I speedtests of ~ 120mbps, no problem.

  However if I insert my Linksys WRT1900AC in the Middle, I get only for speeds of the order of 10-12 Mbps, MAX I tried three different Cat5e cables (including the one provided with the modem router and one supplied with the router) between the router & gateway, with no improvement in the result. The cable from the computer to the router is the same one that works > 100 Mbit/s if I connect directly to the front door.

  I need to use the router to run my network for a variety of reasons, but I don't want to give up 90% of my bandwidth!

  Did I miss something? Someone suggested, I set the ports manually to 100 Mbps instead of having their auto-negotiation, but I can't find any option for this in the firmware. My firmware version is 1.1.8.164461 which seems to be the latest version.

  Thanks in advance for any help!

  Brian

  Activate Media prioritization and set the bandwidth downstream to 120mbps exactly. Quit all devices and the app to normal priority.

• PowerConnect 6224 VLAN config / default gateway

  Hello

  I am new to configuring a VLAN and work with DELL going on so please forgive my ignorance.

  I joined a small agency that currently has a flat structure networking including 1 6224 linked to two 5548 one is connected to three 3548 (access), and the other is connected to a server. The 6224 connects to a proxy (default gateway), and then on the Web. All devices are currently on a 192.168.78.0 24 network with ip default gateway 192.168.80.1

  We want to segment the network using two VLAN initially. VLAN 1 user "80" and vlan 1 safety '70' and I want to clarify a few things before that I try:

  1. can you stay the ip on the network switch for vlan user ex: 192.168.80.123 or should I create a vlan separate management?

  2. I know in order for the inter - vlan, the ip of the gateway routing vlan must be on the 6224 and I then have to configure a default route to the proxy. The proxy must be on one VLAN separate or could I leave on VLAN 80 and change the ip address another que.1?

  Thanks in advance.

  I did it several times myself.  You can do almost an infinite number of ways, but it will be better to stick to certain typical networking practices.  Here is the version digest readers of what would be preferable to do so.

  1 enable routing on the switch stack.

  2. make a 80 VLAN for your network 24.80.  Assign the IP 192.168.80.1 to this VLAN.  In this way, customers will now be a ".". 1' default to the network gateway, they are on.

  3 make an another VLAN 70 for your network 24.70.  Assign the IP 192.168.70.1 to this VLAN.  This will be the default gateway for the network.  Repeat for however many VLANS / networks you want to.

  4. create a separate VLAN for his own 'bubble' network between the switch and the upstream proxy server.  (Lets call him a dummy VLAN 100 with an IP range x.x.100.x 29.  It can be just a little/29 block or something or 24 if this is confusing. Configuring the ports a few ports 'access' for this VLAN for that no marked traffic pass over this network.  Set x.x.100.1 to your Proxy Server and x.x.100.2 to your switch, then make sure you have directions on both sides about where traffic should go.

  5. save your configuration so that you have to rebuild it after a reboot.  :-)

  It will be best to set your expecations about it.  You want realistic during a weekend/maintenance window.  ARP cache and other issues can make for some downtime.  In addition, there are certainly other ways to do it, but that may be hurtful on the road when you need to increase or scale.  Two years on the road someone wondered why a default gateway is on a few eccentric IP, or there are errors of routing intermentent, etc..

  Powerconnect worldwide, just be clear what is the difference between a port of "access" to the port of 'general', and are a port 'trunk '.  Conditions may be different from the Lim to make, and if one comes to tell the world of Cisco, this may be a little different.

  Finally, don't forget to come up with a good procedure for this during your maintenance window.  Come up with a good plan documented and so well thought out, when run you it, it will be nothing more than a task in office project.

• HTTP - Error 502 gateway connection

  Hello

  In an application I'm developing with java and SDK v. 7.0.0, I am trying to connect via http to a server that is located on a private network. The code is pretty basic:

  String url = ""http://site.bl.company.net/login.asp;deviceside=true "; "
  ConFactory ConnectionFactory = null;
  try {}
  conFactory = new ConnectionFactory();
  conFactory.setTimeLimit (1000);
  HttpConnection conn = null;
  Conn = conFactory.getConnection (url) .getConnection () (HttpConnection);
  conn.setRequestMethod (HttpConnection.GET);
  conn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  RCODE int;
  RCODE = conn.getResponseCode ();
  If (rcode! = 200)
  {
  Error ("failed server to ' + this.urlStr + 'code HTTP' + String.valueOf (rcode));
  }
  }
  catch (Throwable t)
  {
  Error ("connection error:"+ t.getMessage () ');
  return;
  }

  The url is visible inside the company VPN. Phones, when the 3G, through BES to reach the VPN. If I type the url in the browser application when, the 3G, it can very well be reached. However, the app in 3G, the connection fails with code 502 (gateway error). We looked through newspapers and it seems that the request does not reach BES; where it might be failing?

  The connection works perfectly fine when the phone is connected in wifi on an access point in the VPN. It works very well to other URLS not on VPN under 3G and wifi.

  Any help/advice/suggestions/questions would be greatly appreciated!

  Thank you.

  If you run in a BES environment, and want to access something that's within the corporate network, you must use the suffix

  « ; deviceside = false '.

  otherwise, you are gong through the gateway to mobile operators, who of course has no access to the internal network.

  See here for more information:

  http://supportforums.BlackBerry.com/T5/Java-development/different-ways-to-make-an-HTTP-or-socket-con...

  But there is a curve ball here.

  Once an application has attempted to access a network located outside the corporate network (like you did with ";) deviceside = true'), that the request is normally prohibited access URL within the network.  It is the problem of split-pipe.  The idea is that if an application could open connections inside and outside of the firewall, it could copy the data from the corporate network to the outside.  It is so restricted.

  So, if you change your current application to use '; deviceside = false ' and then try on a business device that already has had your application under running with. " deviceside = true', it will probably fail the problem of split pipe.

  To work around this, you have three options:

  (a) wipe the device and reinstall the OS and application

  (b) to obtain your BES administrator to allow the app to access both inside and outside

  (c) create a new application.

• Windows 7 computers not compatible Nap (for use with remote desktop gateway)

  I'm looking to implement gateway desktop remotely with NAP to enforce the integrity of the customer.

  I have gateway Remote Desktop works fine, the clients connect without problem. My problems started as soon as I implemented the NAP of the puzzle portion.

  I tried three different Windows 7 machines (two off the field) but I can't get an any of them to sign in, instead, I encounter the message "your computer cannot connect to the remote computer because your computer or device did not pass the network access Protection requirements defined by your network administrator." It seems that all the three machines are in fact considered non-compliant nap because they connect very well once I change to Non-compliant NAP network policy to allow full access. I even turned off all the policy settings in the Windows security SHV, but I still can connect, so it allows to confirm that my problem is with the machines showing non-compliant nap.

  Here are the steps that I took on the client:

  • Napclcfg.msc to enable the customer to RD gateway quarantine enforcement.
  • Services.msc to start the Network Access Protection Agent of service
  • Installed the certificate for Local computer > trusted root certification authorities

  I have read a number of results of research on this topic but nothing helped me to this day. Anyone know what could be my problem at hand?

  Thank you

  Brad

  Hi Brad,

  Thanks for posting the request in Microsoft Community Forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information helps.

• my gateway nv79 pc stops unexpectedly

  My model PC Gateway NV79 stops unexpectedly, even when the connected when I relight the black screen comes up which has the different start modes, such as booting in safe mode and the other three choices I belive. I open it up as much as I could and he breathed with dustoff. Also I almost always keep on the base raised with two fans. I also went through the troubleshooting in Control Panel and it seems that everything is ok, but I noticed that he's a fan or something inside the computer that seems to light up and more then I remember, computer Novice, thank you for your help skills.

  My model PC Gateway NV79 stops unexpectedly, even when the connected when I relight the black screen comes up which has the different start modes, such as booting in safe mode and the other three choices I belive. I open it up as much as I could and he breathed with dustoff. Also I almost always keep on the base raised with two fans. I also went through the troubleshooting in Control Panel and it seems that everything is ok, but I noticed that he's a fan or something inside the computer that seems to light up and more then I remember, computer Novice, thank you for your help skills.

  Assuming that when you say it stops - mena you just, it turns off without warning?

  Closure would imply an orderly progression where it closes open programs and actually stops the BONE before turning off power and which would not cause the symptoms you gave.

  Could be damaged by the heat, or you might have a fan coming out, only not on if necessary.  Your "seems to come and goes out more" could be that the fan is cycling when it should just be on... meaning that it provides insufficient cooling.  Only verified material.

• ASA with A/A and three router ISP links

  Can someone help me, I have a problem I need to connect two ASAs with active and I have three routers to three Internet service providers, how do I optimize the gateway redundancy and load balancing.

  and I can use the router to ASA's private beach.

  Another Question is, do I really need host proxy server-based internet access.

  Please help me.

  Concerning

  One solution is to use the Protocol GLBP routers (OSPF in not available in A/A...).

  "GLBP offer deals on several routers (gateways) load balancing using a virtual IP address single and multiple virtual MAC. Each host is configured with the same virtual IP address, and all of the routers in the virtual routing group are involved in the transmission of packets. »

  GLBP group-load balancing [dependent on host: alternating | weighted]

  (see feature cisco IOS to IOS and hardware available browser.) .

  http://www.Cisco.com/en/us/products/ps6550/products_white_paper09186a00801541c8.shtml

  HTH.

  Roberto

• WIN8 - gateway by default not found - tedious error

  Since a few weeks I get an error repeatedly (and frustrating).  2-3 minutes to a few hours and my wifi connection errors on.  I get an error limited connectivity (no Internet access) and most of the time - but not every time - running the utility of troubleshooting and to reset the card network solves the problem.

  System information:

  After you run the troubleshooter, it's the detailed info, I get:

  The connection between your access point, router, or cable: detected
  Your modem broadband has connectivity problems: does not work
  The default gateway is not available: fixed
  Reset map "Wi - Fi": completed

  And here is some info on my wireless NETWORK card

  Adapter Wi - Fi information about network drivers:
  ... Description: Intel Centrino Advanced - N 6235 manufacturer.... : Intel
  Provider of...: Microsoft
  Version...: 14.8.8.75

  Set the type of security: WPA2 - PSK configured for encryption type: CCMP (AES)

  I have two other computers (Mac and Win 7) as well as three tablets, in the House, and no other problems.  Also, I encountered exactly the same problem no matter what router I am on.  It could be my house or any number of coffee shops, library, House of friends, etc, I always get this error at a given time.

  My troubleshooting steps, so far:

  • Verify that the router has more recent firmware.
  • Uninstalled the NETWORK card wireless driver and reinstalled more recent Intel.
  • Turn off the features of the power management on the NETWORK adapter through the device and power settings manager, to make sure that the computer was not put the NIC to sleep.
  • Disabled firewall and antivirus to see if these programs 3 rd-party were interfering.
  • Achieved a cooling system - it seemed just something to do.
  • Wipe the PC made an installation clean and test from there (with no additional software or bloatware installed).

  And these steps (made one at a time), I keep getting this same exact error.

  My last step is using a USB wireless adapter and running through my wifi.  It is a temporary solution at best - if it is stable - that my speeds have fallen to 5 x slower than with the internal wireless card.  But that leads me to believe that it is the NETWORK card or a problem with Win 8 being responsible for managing the NETWORK/connection map.  The USB has its own software.

  Does anyone have any ideas or solutions?  I did some research autour and my problem is not unique, but I've not found a viable solution for the moment.  Declassification of Win 7, unfortunately, sounds like the best solution... but I refuse to pay for another OS, because there is something wrong with this one.

  Thank you
  Ben

  p. s.

  It happened five times by writing it... sigh.

  Hi Ben,

  I appreciate your efforts to try the following steps to solve the problem of troubleshooting.

  This problem may occur if the network card is damaged or corrupted, if TCP/IP is damaged or altered.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:
  If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

  (a) boot to the view from the office.

  (b) open command prompt, right click in the left corner when the window appears and select (admin) command prompt.

  (c) at the command prompt, copy and paste (or type) the following command, and press ENTER:
  
  netsh int ip reset c:\resetlog.txt

  
  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  (d) restart the computer.

  Check out the link for more information.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Can we have three VM servers with software very often talk to each other.

  Hi, I'm new user who started looking for in VM yesterday. I have a requirement where I would like to split a server using VM in 5-6 servers. I would use a VM to install SAP R/3 IDES, another to install SAP CRM IDES, third to install BO and the fourth where I access these three applications. These three programs should talk to each other very frequently. Please let me know if this is possible. These three will be will have separate IP address?

  Please also let me know that all the software are required. If I can get VMware free so what's the advantage with VMware eSphere which cost a lot (for personal use).

  This I do for the self-study that I need to install 2-3 software on separate machines so please be easy on the cost.

  I suggest buying a Dell/HP/IBM server 1 Quad Core with 8 GB of RAM and a SATA drive at least 2.

  Check compatibility on http://www.vmware.com/resources/compatibility

  With 4 cores and 8 GB of RAM, you can run all your VMS and something else (like the gateway VPN or TS, a domain controller for your Windows environment,...)

  André

• B2B XML Gateway

  Hi all
  
  B2B can be XML Gateway files? is this possible?
  If so, please guide me how to do...
  All documents please?
  
  B2B we can configure JMS (topics and queues)?
  
  
  Concerning
  CNU

  Hi ALAIN,

  A bug has been identified for similar cases two or three months back. Not quite sure if it was fixed, and the patch was released. Please see-

  error in inbound processing: message-> XML Gateway EDI

  Please apply the latest patch of B2B available (currently 8703410 - MLR13) and try again. If the problem persists, please raise a SR with Oracle's Support.

  Inform us please the conclusion.

  Kind regards
  Anuj

• Event gateways are not displayed

  I am interested in working with the Garteways event in the ColdFusion administrator. However, in looking over the administrator at my workplace, I see that the event gateways are not among the different settings available for customization. What should I do to get it to appear on the Administrator page? Note that reinstalling CF on the server is not an option for me, so I hope for a workaround. Thank you!

  What is your version of Coldfusion? Gateways of the event started with MX7.

  What is your edition or license? The Standard edition does not support the event gateways.

  In any case, here is a workaround, assuming that your version supports gateways. Login to the administrator.

  The bridge events section has three pages, namely: entry door Types and Instances of the gateway settings. Their paths to the administrator are:

  Parameters: /eventgateway/index.cfm
  Types of gateway: /eventgateway/gatewaytypes.cfm
  Instances of the gateway: /eventgateway/gateways.cfm

  Say, you are now in the default Coldfusion Administrator page. To get the bridge settings page, replace the index.cfm eventgateway/index.cfm in the field of the browser.

  To best illustrate, my pages are

  CF Admin: http://127.0.0.1:8500/CFIDE/administrator/index.cfm

  Parameters: http://127.0.0.1:8500/CFIDE/administrator/eventgateway/index.cfm
  Types of gateway: http://127.0.0.1:8500/CFIDE/administrator/eventgateway/gatewaytypes.cfm
  Instances of bridge: http://127.0.0.1:8500/CFIDE/administrator/eventgateway/gateways.cfm