Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

Similar Questions

• The Routing and remote access could not start, error 214500037 (0x80004005)

  My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
  Event ID: 7024, with service specific error 2147500037 (0x80004005)
  I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

  Thank you

  Hi budhihartono,

  Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Routing and remote access to the Server 2003

  I configured the remote access and routing service in my Server 2003 duly NAT enabled. All my clients are not in the field. All use internet and intranet connection using my proxy authentication provided by the administrator of the proxy server. I would like to restrict the clients except intranet connection. How to limit the customer?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• Routing and Remote Access Server & VPN

  We have Server Windows 2008 R2, which is our domain, but also DHCP server controller. On this server we have Setup RRA for VPN and it works fine. We had to stop our DC due to a failure and after I got the domain controller to the top and it is a problem for users that connect to the VPN.

  When users try to connect to the VPN, it connects successfully. But they did not access network as usual. I looked in the VPN properties, and it receives an IP address of 169.254.xxx.xx which is not the correct network IP address. So while the user who is remote think they are connected, they are currently not connected.

  Does anyone have advice what is the cause of this and how to troubleshoot or resolve?

  Hello

  Given that you are working on Windows 2008 R2 please post your question here:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Unable to connect to the internet when the router is connected.

  I had a wired router, model number befsr41 v4.3 but ports got fried and I sent in replacement and got a replacement today. But I can't connect to the internet. When I go into control panel > LAN data packets are crossing. When I start setting up the drive it says that it cannot detect the router and make sure that its properly connected and try again. I followed the instructions on the disk exactly, even if I knew how to set up. Any ideas on why this might happen? I never had this problem with the first router I had. I can't yet full access to the top of the page as it is said that its taking to long to connect and it didn't.

  You must configure the new router...

  If your Internet Service is cable follow this
  If your Internet Service is DSL follow this

• Unable to connect to the internet. 651 error whenever I put in the UN and PW?

  Hello

  I recently bought a new gaming pc (second hand) and got an electrician to come in and extend the cable to come in my room (thats why it is wired). When I go to connect to it, it always comes up with "error with error 651 modem. I did try almost all solutions on the forums and its still to come with the same thing. I use windows 7 64-bit ultimate, and it was the only mistake never to come. I don't know much about this stuff, so not able to identify a large amount of details. If you need further information, you may be able to help me find him. It comes up with in the networks 'found' it just "Broadband connection", I click on that and put in all my details, then it comes up with the error?

  I've known idea if the error is on the modem, cable, or PC :/

  Thank you.

  Hi Emmy,.

  Usually this problem is due to cable connection related issues. I would like to know some information about this problem so that we can help you further.

  1. that all the troubleshooting steps have tried to solve the problem?

  2. are - what you're talking to the ISP (Internet Service Provider) password and username?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps.

  See Microsoft Help next to solve the problems of wired and wireless.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Try power cycling your Modem and router and check it out.

  Follow the steps to run power cycling the Modem and the router:

  a. save all your work, close all open applications, and then turn off your computer. Wait a minute.
  b. first, turn off your router and wait a few minutes.
  c. turn off your modem.
  d. unplug the Ethernet that are connected to the router, modem and computer cables.
  e. reconnect them and ensure that there is no connection drop between them.
  f. now, turn on your computer.
  g. turn on the modem and wait until it is initialized and then turn on the router.

  Method 3:

  Try to reset the TCP/IP settings and check if the problem persists.

  See the following Microsoft Support article to reset the TCP/IP settings.

  http://support.Microsoft.com/kb/299357/en-us

  Please reply with the status of the issue so that we can better help you.

• Error when you try to access my library in CC saying "unable to connect to the server.

  I get an error when you try to access my library in CC saying "unable to connect to the server" - is there a solution? I can view them on the web app, but can't access it when I open Adobe Illustrator or other Adobe programs. Help, please! The error appears when I hover over the icon to the left of the trash.

  

  Hello

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• Install and run Adobe animate on a computer that is not connected to the internet

  I am running Creative Suite 5 on my computer graphics. This computer is not connected to the internet for security reasons. I want to upgrade to Adobe animate but I am confused how the creative cloud software works. What I must be connected to the internet to install and run this new software? Y at - it an option to install and run this software on a computer that is not connected to the internet?

  I appreciate any comments on this issue.

  Thank you.

  CC needs you to be online:

  1. When you turn it on for the first time

  2. once in 90 days, you need to be online to keep the active CC.

  The rest of the time, you can use it as desktop CC without any internet connect product.

  Concerning

  Stéphane

• EA2700 and remote access to the DVR

  Does anyone have a solution for the router settings allow access remotely
  Recorders digital windows and Linux?

  Justme2012 wrote:
  OK, so now I activated Remoting but the remote routers
  Management port is different from the default port on the DVR.

  The ports must be different. In this way it will not create a conflict. No two devices must use the same port numbers. Once again as what has been mentioned in this thread, you must use the port number provided by the manufacturer for the DVR and just leave the router uses it is default remote management port. This is to ensure that there will be no conflict. To check if the ports were opened successfully you can do an audit of port. You can use this site to check it out. http://ping.EU/port-chk/

• The managed behind router switch remote access?

  What is the best way to access remotely to a switch behind a router?  I will use a switch SF300, and there is no server.

  For points of access (PA) behind a router, I give each a diffferent LAN address and port number.  In router I have forward TCP traffic with the single port/LAN IP.  Then using the port numbers with the address of the static router, the browser can remote access to the router or the attached AP.  But where do I put the managed switch LAN port number?  Assume default is port 80 and I would change to 8001 to switch #1; 8002 to switch #2; etc.  Could not find this info in the manual of configurtion.

  Hello

  At this point, I would recommend a call to the Cisco Small Business Centre at 1-866-606-1866 support so that action can be taken and your configuration can be reviewed.

  I have reproduced the concern here and I am able to remotely manage my switch SF300 with an RV082 as the router.

  My rule in the RV082 are as follows:

  Creating a custom topic UPnP service.  Create SF300 application name (it is a basic text field and can be any name), 8001 an external port and internal port 80.  I send to the address IP internal SF300 switch and click the check box.  From there on, I select Add to the list.  Once it appears in my list, I then click Save settings at the bottom of the page.

  Thank you!

  Dave

• Server ezvpn 887 router for remote access

  Hello.

  I'm having a problem with the implementation of remote access using easyvpn server on a router 887.  I followed the tutorials and also used Assistant cisco configuration professional easyvpn server to the configuration but still having a problem.

  I see, but Phase 1 finished, Phase 2 will fail with the following error...

  09:43:26.515 Oct 10: ISAKMP: (2003): check IPSec proposal 8

  09:43:26.515 Oct 10: ISAKMP: turn 1, ESP_AES

  09:43:26.515 Oct 10: ISAKMP: attributes of transformation:

  09:43:26.515 Oct 10: ISAKMP: authenticator is HMAC-SHA

  09:43:26.515 Oct 10: ISAKMP: key length is 128

  09:43:26.515 Oct 10: ISAKMP: program is 1 (Tunnel)

  09:43:26.515 Oct 10: ISAKMP: type of life in seconds

  09:43:26.515 Oct 10: ISAKMP: service life of SA (IPV) 0x0 0 x 20 0xC4 0x9B

  09:43:26.515 Oct 10: ISAKMP: (2003): atts are acceptable.

  09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 the proposal

  09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 88.xx.xxx.174:0, distance = 80.177.185.185:0,.

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 192.168.21.12/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = NONE (Tunnel),

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 128, flags = 0 x 0

  09:43:26.515 Oct 10: map_db_find_best found no corresponding card

  09:43:26.515 Oct 10: IPSEC (ipsec_process_proposal): proxy unsupported identities

  09:43:26.515 Oct 10: ISAKMP: (2003): IPSec policy invalidated proposal with error 32

  'Proxy unsupported identities' research indicates a NAT problem maybe, but I don't see where this would be.  In my view, the problem is elsewhere.

  I use the VPN Client 5.0.07.0440 and using transparent tunneling IPSec (on TCP/10000) that the client is located behind a firewall/NAT device.

  Does anyone know what may be the issue?  Attached full config.

  Hello Mick

  Before that, one more try. .

  Remote control the pfs as follows

  Profile of crypto ipsec RemoteAccess

  no set pfs group2

  Remove and add the virtual model crypto back

  type of interface virtual-Template1 tunnel

  No ipsec protection RemoteAccess tunnel profile

  Profile of tunnel RemoteAccess ipsec protection

  I hope this will solve your problem

  Henin,