Tidal Enterprise Orchestrator Server service is stopped.

Similar Questions

• VMware vCenter Orchestrator Server service cannot be started

  After doing a clean install on the build version 5.1.1 2942, the VCO service will not start. All points configurations are green, VC to the top and running, the service account used for the service of a member of the local administrators. The event in the system log id reported as 7024, below error text:

  VMware vCenter Orchestrator Server service stopped with the error service particular incorrect function...

  If anyone has an idea, please advise. Thank you.

  Thanks for the tip. I was able to start the service by stopping the Foglight Quest agent running on the box first, then by restarting VCO. The article stresses that increase the RAM would help, however the virtual machine has been set to 10 GB, with abundance available for the JAVA virtual machine, but I always saw the issues mentioned in the wrapper.log file.

• Departure Orchestrator Server service fails with error 1053

  Hi all

  One of our servers VCO does not start the VMwareOrchestrator service, it returns the above error. He was executed successfully, but the VCO service account password has expired, so I had to update. I checked the following:

  -VCO active service and good password account verified

  -VCO member of that server's local administrator group account service

  -Re-running VCO web config, everything configured and green status

  -Able to connect successfully to basic VCO and vCenter server using the account of Service of VCO

  The other interesting thing is I removed the server.log file, but is not be recreated when I try to restart the service.

  Can anyone advise on what I might be missing with this config? Thank you.

  Locate the orchestrator.bat file and start from the command line.

  Christophe.

• Detection of InsightCM Server service stopped

  Hello.

  Is it possible to get some kind of alarm or notification, if the InsightCM Server service stopped running on the server? It is not something I've experienced, but I just got the issue with the customer, so that I am currently working.

  Thank you.

  Hi Jens,

  Unfortunately, there is not a built-in way to be alerted if the service of InsightCM crashes. However, you can use the built in tools of Windows services to run a program if the service crashes. You can set the action in Windows Services by right-clicking on the InsightCM service and selecting Properties and then accessing the Recovery tab. You can then this pointer to any generic EXE. This program, for example, could send users to inform them of the accident.

  

  Let us know if you have any other questions!

  Kind regards

  Kevin K.

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• VMware vCenter Server service stops or restarts at the start of data collection

  VMware vCenter Server service stops or restarts at the start of data collection

  I am using vCenter Server 5.0

  Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.

  Please any help!

  Thanks in advance

  It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.

  Change to 0 to disable/re-enable the agent and it should fix the problem.

  Please open a ticket of level 1 with telephone support if you need more help.

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• VMware vCenter Server service stops after 1 hour

  I'm having a problem with my server vCenter 4.0. Less than an hour of a reboot, the VMware VirtualCenter Server service stops. If I restart it... It works for about an hour, then stops again. The following event is logged in the system event log. The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I'm SQL2005 Express is using a virtual machine, windows 2003 Std, 1vCPU, 4 Gb RAM Tomcat and SQL use a lot of memory.

  It is a similar problem to the responces you find on google - but not the same thing. My service will stop about an hour after a reboot clean and efficient.

  Ideas?

  I see that you have conveniently left a crucial part of the document...

  The part where is says this (pg 74).

  Base Group of 2005Express of Microsoft SQL Server that you can use for small deployments of virtual hosts up to 5 and 50 machines. If the machine has Microsoft SQL Native Client is installed, remove it before installing

  vCenter Server with the cluster database.

  If the machine has MSXML Core Services 6.0 installed, remove it before installing

  vCenter Server with the cluster database. If you are unable to delete using the

  Add or remove programs, use the Windows Installer CleanUp utility. See

  http://support.microsoft.com/kb/968749.

  Microsoft SQL Server 2005 for Microsoft Windows XP, apply MDAC 2.8 SP1 to the client. Use the native SQL

  So yes, you have exceeded your environment.  Still doesn't tell me if you looked at the SQL Express newspapers, because I'm sure that's the problem.

• VCenter Server service stopped with the error service special 2 (0x2)

  Hello

  I installed vCenter Server 2.5 5 update on the WIN2003 SP2 server, but after reboot I get this error:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7024

  Date: 25.09.2009

  Time: 09:19:43

  User: n/a

  Computer: VCSERVER

  Description:

  The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  and I can't connect using VMware Infrastructure Client.

  Follow the pdf file and you will be fine.

• "CCP registration Service server application has stopped working".

  For two days I received the following error message: "check of the CDP server application has stopped working". I reloaded the software (after research, it seems to be one of my suppliers of USB) and still get the message. Someone at - he a clue as to what then? I am still under Windows Vista 2007.

  Hello

  What software you have reinstalled?

  Perform the clean boot and check:

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• What is a Terminal Server Services?

  Original title: Terminal Services?

  What is a Terminal Server Services? It's the description: allows multiple users to be connected interactively to a machine as well as the display of desktop and applications to remote computers. The Foundation of the remote desktop (including RD for administrators), the fast user switching, Remote Assistance, and Terminal Server. I don't want other users to be connected to my computer and I don't want to share anything with other machines. Services Terminal Server has to do with the router? Can you please let me know more about this service and what will happen if I stop the service. My OS is Windows XP SP3 / Google Chrome / laptop with wireless router / device of Netgear USB to connect to the router. Thanks in advance for your help.

  Hello

  In Windows Server 2008 R2 remote desktop services, formerly Terminal Services in Windows Server 2008 and earlier versions, is one of the components of Microsoft Windows (client and server versions) that allows a user to access applications and data on a computer on a network using the Protocol RDP (Remote Desktop). Services Terminal Server is the Microsoft implementation of thin-client terminal server computing, where Windows applications, or even the entire desktop of the computer running Terminal Server Services, are made accessible to a remote client computer. The client may be a computer, running any operating system as long as the Terminal Server services protocol is supported, or a barebone machine powerful enough to support the Protocol with the Terminal services Server, only the user interface of an application is presented to the customer level. Any entry which it is redirected over the network to the server, the application execution takes place.

  For more information, see this link:

  http://support.Microsoft.com/kb/925876

  It will be useful.

• Garbage in Orchestration server entries: responsibilities

  I see in the Orchestration server properties of the my CPO - tab of responsibilities, there are 3 entrances for subscription AMQP. On the 3, I use one in some of my workflows. But the other two "unknown (some id)" is not available in the POC and not used in a process or workflow. Am not able to find these entries under target AMQP. I tried to restart the POC service to see if these entries get flushed. But that didn't work either. Can someone explain please how to remove these entries?

  

  Thank you

  Anish

  Did you have before AMQP targets and then delete them or something?

  Probably something hanging in the DB that should be removed. I suggest a TAC case and have them checked.

• EPMA Server Service does not start after upgrading 11.1.2.2 to 11.1.2.3

  Hi all

  I successfully updated and configured the EMP products but when I start the server the EPMA Service its not not fixed the error giving "the Oracle Hyperion EPMA Server Service on Local computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs"

  When I looked in the newspapers of EPMA (DimensionServer.log)

  [2014 06-11 T 05: 13:24.222 - 04:00] [EPMADIM] [NOTICE: 32] [EPMADIM-1] [EPMADIM. Hyperion.DimensionServer.Utility.ChannelUtility]

  [tid: starting the server EPMA] [ecid: disabled, 0] listen to via IPv4 [2014-06 - 11 T 05: 14:57.359 - 04:00] [EPMADIM] [INTERNAL_ERROR:32]

  [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: EPMA DimensionServer Startup] [ecid: disabled, 0]

  SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not start because the connectivity of database could not be established.    to

  Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString)

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  [2014 06-11 T 05: 14:57.406 - 04:00] [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException]

  [tid: EPMA DimensionServer Startup] [ecid: disabled, 0] SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not start

  because the connectivity of database could not be established.    At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize

  (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  At Hyperion.DimensionServer.Process.Program.InitializeSessionManager)

  At Hyperion.DimensionServer.Process.Program.StartDimensionServer)

  At Hyperion.DimensionServer.Process.Program.Main (String [] args) [2014-06 - 11 T 05: 14:57.734 - 04:00] [EPMADIM] [INTERNAL_ERROR:32]

  [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: starting the server EPMA] [ecid: disabled, 0]

  SVR_ERR_PROCESS_DID_NOT_START:process ' C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer

  \ServerEngine\bin\EPMA_ServerEngine.exe' could not be started.

  I also looked in the event log.

  [EPMA DimensionServer Startup] ERROR SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not be started because database

  connectivity could not be established.Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start

  because the connectivity of database could not be established. -> Oracle.DataAccess.Client.OracleException: ORA-12545: Connect failed

  because target host or object does not exist

  At Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString)

  -End of the exception stack trace internal-

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  At Hyperion.DimensionServer.Process.Program.InitializeSessionManager)

  At Hyperion.DimensionServer.Process.Program.StartDimensionServer)

  At Hyperion.DimensionServer.Process.Program.Main (String [] args)

  What I've observed, it's that when I upgraded from 11.1.2.2 to 11.1.2.3, it installs automatically two customers Oracle (32 and 64-bit) on

  the server. But Server customer already has Oracle installed on it.

  I looked in path Variables.

  PATH=C:\app\product\11.2.0\client_2\bin; C:\app\product\11.2.0\Client_1\bin;

  He also added check the TNS_ADMIN environment variable pointing to the Environment Variable

  TNS_ADMIN = C:\Oracle\Middleware\user_projects\config\dbclient

  and I changed it to

  TNS_ADMIN=C:\app\product\11.2.0\client_2\network\admin; C:\Oracle\Middleware\user_projects\config\dbclient

  and I am also able to ping and also connect to the database but I when to start the EPMA Server Service.

  I still get the same error.

  Well want to can someone help me

  Hi all

  I have this problem.

  Add the property "oraTNSDescription" to the EPMA_PRODUCT/DATABASE_CONN, starting from a prompt command/line, run:

  epmsys_registry addproperty #{componentID}/@oraTNSDescription "(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=host1-vip.uk.oracle.com)(PORT=1572))(ADDRESS=(PROTOCOL=TCP)(HOST=host2-vip.uk.oracle.com)(PORT=1572))(LOAD_BALANCE=OFF)(FAILOVER=on))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=MYSERV))"

  NOTE:

  -To find the 'componentID' run: «epmsys_registry EPMA_PRODUCT/DATABASE_CONN overview»

  -"epmsys_registry" utility is here: "$MIDDLEWARE_HOME/user_projects/epmsystem1/bin.

  You can also view this document.

  EPMA Dimension Server starts do not (Doc ID 1672159.1)

  The screenshots are on my blog.

  http://Hyperion-consulting.blogspot.com

• VRM Service is stopped - replication device Root Partition full

  Hello

  We recently had an upgrade to vsphere 5.5 and a replication device (version of the device: 5.8.0.1).

  Everything was fine to begin with, but now the service VRM stops and does not start.

  Of the survey, we found that the partition root unit was full.  We followed it down to the a directory called 16384 in the directory/var/lib/vrmsdb/base.

  I guess that's why the VRM service does not start.

  Can you tell me what that fills this directory and the size of this directory can be controlled or do we just add more disk space?

  Thanks in advance.

  S.

  Hello

  Please open an SR to get help with adding additional disk space and move the embedded DB vPostgres to a partition with an extra space.

  Once the DB is running, the DB tables can be analyzed to see the root cause for the full DB.

  HMS - configuration.xml file there is a hms-eventlog-maxage parameter that can be lowered (for example to 604800, 7 days), in order to limit older data stored in tables IncomingEventLogEntity and OutgoingEventLogEntity. Without the DB dump, it would be difficult to know what is the origin of the complete BD, but it reported problems with busy environment and occasional VR server disconnects which have led to large number of notifications between servers VRM and fills the tables IncomingEventLogEntity and OutgoingEventLogEntity.

  Kind regards

  Martin