Tilt Shift problem

Similar Questions

• Tilt & shift for the video.

  Hello

  I ve been shooting landscape/houses (video) with a 5DMIII. Using a zoom of L as EF16 - 35mm f/2.8 L II USM to pan turning my camera slowly with my head to tripod/video, sound, some distortion is present in my images. Especially with buildings, using the broader range (16-24 mm) of this lens. You know what I mean. Vertical lines while the camera rolls.

  One of my friends did the same images with the EF24 - 70mm f/2.8 L II USM and the range of 24 mm distortion is also present, while the camera moves.

  Now, if I use a tilt & shift lens as the TS-E24mm f/3.5 L II will be able to correct the perspective first and start doing my panoramic video keeping the perspective correction? Or this function is ok just for photography?

  I guess that the problem is less clear during the filming of landscape remotely and very present shooting houses/towns closer views (here is my real problem). But I need to save the two.

  Any help will be much appreciated.

  Thank you very much.

  Kind regards.

  You can use a lens tilt shift for the filming of a video, pano the same as you would with your zoom.  However, depending on the subject, you might get weird results.  The 'shift' that you would use to correct perspective could change depending on how your topic based on your point of view and distance change.  I can't say for sure without going out and do it, but I guess that if you keep your camera in a spot and turn it (as opposed to moving your camera around the subject), the passage that you use for something like a building will have a similar distortion effect because it is to one side of the lens and moves to another.

• tilt shift and another blur adjustment anchors not visible

  I have the latest updates for Adobe Photoshop CC. Using the edge blur filters, such as Tilt Shift don't show any adjustment anchors. If I get the chance to run my cursor of the mouse on them, I get a modified mouse cursor to indicate that I came to move them. but the reference lines, anchors... nothing is visible to show me where to make the changes or limits for these adjustments. I had hoped that this bug should be fixed, but apparently not. I am unable to find any other reference to it on the forums so maybe it's just me.

  I can run my old Photoshop CS6 and they show very well. Any suggestions on how to fix this?

  I found the solutiuon. We must go in the bed of the view/Show/Edit. No idea what the default value is to have turned them off. Totally stupid. But at least I found where light them.

• Shift problem

  I always had the problem of lag in plaing games. The data on my computer used a lot and have only 18.7 GB left. Is this the reason why the computer lag? If so, how can I solve this problem? If not, what the problem is?

  Hello

  The shift could be a combination of things of a general lack of maintenance on your computer to the system requirements of games being too expensive for graphics capabilities and of your system's RAM

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  @@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• BB Storm: Tilt screen problem

  Hello

  Purpose is to display a series of files bmp on screen of BB storm 9500 (to show that video). It works fine as long as I do not tilt the blackberry. Time as I tilt the device (while loop), it displays immediately stops and the last bmp file. As can be seen from the code, I've implemented it as singelton for only 1 instance of the BMPBuff class.

  public class BMPBuff extends MainScreen
  {
  private Bitmap img;
  private static BMPBuff instance;
  
  private BMPBuff() {
      BMPpThread pThread = new BMPpThread();
      pThread.start();
  }
  
  public static BMPBuff GetInstance(){
  

  synchronized (UiApplication.getUiApplication().getAppEventLock())       {
      if(instance == null){
          instance = new BMPBuff();
      }
      return instance;
    }
  }
  
  public class BMPpThread extends Thread
  {
      public void run() {
      int count;
  
      BMPPlayerBuffer bBuff = new BMPPlayerBuffer();
      for (count = 0; count < 300; count++)
      {
       img = bBuff.BMPImageArray[count];
       UiApplication.getUiApplication().invokeAndWait(new Runnable()
        {
          public void run()
          {
              invalidate(); //paint images in screen
          }
        });
      }
      }
  }
  
  protected void paint(Graphics graphics)
  {
    graphics.drawBitmap(0, 0, img.getWidth(), img.getHeight(), img, 0, 0);
  }
  }
  

  How I instantiate this class is,

  BMPBuff bScreen = BMPBuff.GetInstance ();
  pushScreen (bScreen);

  I've been expectiing it works fiine after implementing the Singelton. But does not work. Any ideas/help?

  I'm glad to hear that it worked! You can mark the issue as resolved?

  I don't think he had much to do with the orientation of the device in particular. As you said the same thing happened when you press the menu button. I think that other interactions of the interface user would be likely to cause the same problem with your original code.

  My guess is that he was blasting through the loop you cause only to see the last image. Have you seen an animation with your original code? It might also make sense special in the event queue, which throws events when certain UI interactions occur to keep sensitive things. To tell you the truth I don't know

  With respect to the correction of the attempt to singleton, who won't have an effect. For example, Android strives to save and re - create your current activity, and a singleton may have helped in this case. But I believe that BlackBerry leaves the process running and simply makes a new provision on the current screen.

• keyboard shift problem

  My shift key on the keyboard guard stuck when I type numbers but no letters.

  Hello Jane,.

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  First I suggest you try unplugging the keyboard and plugging it back in again and see if the problem is resolved.

  If the problem persists, try to update the drivers for keyboard and check if it helps:

  1. press the Windows key + x , and then click Device Manager.

  2. now, select keyboard and expand it.

  3. right click on the driver and select put to update driver.

  4. check if the problem is resolved.

  If you use a wireless keyboard and Bluetooth please follow the steps in the article below and check if it helps:

  Troubleshooting: keyboards

  Try the above steps and let us know if it helps. For assistance feel free to post your questions in the Microsoft forums. We will be happy to help you.

  Thank you.

• Illustrator CS5.1 race uneven shift problem

  I am getting a problem in Illustrator CS5.1 I can't seem to solve. The attached picture shows the issue I'm having. I've put a 1px on three identical boxes.

  Top - race together at off - race overlaps edge of irregular shape, form seems to extend outside of himself on the lower edge

  Intermediate - value stroke center - race seems in good condition

  All long-distance race - set to race inside - tilt down unevenly, is no longer able to be in contact with a top edge of the shape

  In addition, the form keeps moving on the artboard. Using smart guides, I'm the one anchor point to an intersection governed, it seems to snap, but when I release the mouse, he'll jump a bit in a random direction.

  Other forms are the same. The race on a square or a rectangle appears in good condition such as a stroke center, but as the other two options that it compensates randomly

  I rebooted my machine (Mac Pro 2009 os10.10.2), deleted Illustrator prefs, copied the forms into a new file and re-created from scratch file. Same error recurs. Any other ideas?

  

  Looks like a line on the question of the pixel grid. The RGB default documents for this, but it can be changed.

  http://www.vektorgarten.de/problems-align-to-pixel-grid.html

• table cell shift problem

  Get a weird selection indicator displacement effect in the cells when using tables in LV 2013 (32) on Win 7 (64).   Hesitate to call it a "scroll" because that which has other meanings in the context of the table.

  Click on the letters in the attached VI to see - same effects if the table is in a VI running or not.

  + clicking on 'A' has no effect.  You remove 'A', the cell to move.

  + clicking on one of the cells located below "A" act as above

  + clicking on the header cell 'x' causes a big drift.  Put the other values in the cell has other effects (some travel a lot, some not at all)

  + clicking on the cell of the table "y" causes a big bend on the side.  Put the other values in the cell has other effects (some travel a lot, some not at all)

  + clicking on the "z" table cell is not moving.  You delete 'z', a big bend on the side

  + I noticed the change which occurs when you remove "A" stops at the same place in the landscape as if you

  Comments:

  + Seems to be related to the cells to justify = center.

  + Shifting is always is from right to left.

  + I noticed the change which occurs when you remove "A" stops at the same horizontal location as if you click on 'y '.

  + occurs at least two different machines from different mfg both 2013-32 running on Win7-64.

  In the case where you are still interested, see 5 message in this thread.

• Microsoft Wireless Desktop 3000 shift problems

  Hi all

  A month ago, I bought a desktop wireless 3000 computer (3000v2 keyboard + mouse 5000).
  Since the first day, I noticed some lag issues when using: press and hold a button and slap it just as 8 - 10 times while I still have the button pressed; lagges mouse while moving it arround as it jumps from one part of the screen to another.
  I went back to the store and he changed like 3 times, but the problem still apears.
  I repositioned the receiver at the back of the PC to the front ports, I tried everything and still the problem accures.
  If someone could help me I would be very greatefull.
  See you soon,.
  Vlad / Deleteplz

  Hi Deleteplz,

  I suggest you try the steps from the following link:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

• Tilt Shift / other not available on CC 2014

  Blur on 2014 options are grayed out.  Open my CC and no problem.  What gives?

  Thanks for the help!

  aF

  Apparently, I need more sleep... 'Blur Gallery' button under 'blur' had everything.

• Register shift problem

  Dear LabVIEW forums,

  I'm having difficulties of programming a structure that seems to work in theory on paper.  The structure or the procedure is based on the research of the cutoff frequency (unknown but I can tell you its approx.80Hz) a low-pass filter (which is integrated into a subvi).  Filter sub - vi has two inputs (the input voltage amplitude and frequency), and output (voltage amplitude).

  My idea and the structure is to use a method of sharing half to find the cutoff frequency, based on frequency of 10 MHz (initial value) starting then... gradually halve the frequency to amplitude ratio (input/output) > 0.7071 (i.e. the - 3dB cutoff point) then...

  to adjust the new test to 1.5 x the frequency of value frequency when amplitude ratio (input/output) > 0.7071 (i.e. with the frequency value above, but more close to half of the value of the previous frequency which was above the cutoff frequency).

  Then re - test and adjust accordingly the same way until the test frequency is 1 Hz of the cut-off frequency, result of the amplitude (input/output) = 0.7071 report

  The attached vi seems to partially work whereby the first half-split up to 76 Hz works however unexpectedly exceed it down to 38 Hz (it should have returned up to 114 Hz for the frequency of re - try (i.e. 1.5 x 76 Hz = 114 Hz).)

  I tried different combinations of program but I'm all through and round in circles now.

  Any help and assistance would be greatly appreciated.

  Kind regards

  I also changed some small things around so that it gives a better approximation, as making the multiplied value from 1.5 to 1.1 and lowering the number of initial frequency so that the result is more accurate. If it is not enough just to let me know =)

• Skyrim PC shift problems

  I recently downloaded Skyrim to my pc (razor 1911 version). And my PC was running it on settings means great. On the spot, there was a little laggy. But 20 minutes ago this piece of blam! - -a started trolling again on medium settings. So I had to put on low heat and everything is OK now. I see no difference between the low and medium configurations but nevermind. Does anyone know how can I fix? I have the latest patch 1.3.10.0.

  You know I'm lazy to think. Too bad, I will just play on low heat. Thank you!

• Where is the Tilt-Shift filter in Photoshop CC?

  I can't find it in the menu filters.

  It has been deleted?

  Hah!  My screenshot was here five minutes ago. :-(  There you go.  It's still in my Clipboard.

  

• data shift problem

  Hello

  We have a location in FDM named India. load us data each month at this location.due some mapping changes we created another site Inde1 with some modifications. I loaded data and consolidated with success to the new location. Although I loaded the same data in the new location, it's showing different data. (The India is in Prod, Inde1 check in the Dev.Same data file, but showing the different Inde1 values). Can anyone suggest what could be the reason? and what should I check?

  Thanks in advance,

  MB

  This is because some of the mappings are mapped to incorrect target mappings.

  Thanks for your help.

  MB

• When I use tilt-shift filter red and green ghosting occurs

  

  In fact, all the new blur filters exhibit this behavior.

  How should I do?

  I fixed it. 'Coder CL' power in the graphics processor options off advanced.

  No thanks to chat online Adobe ;)