data shift problem

Similar Questions

• data flow problem, queuing Subvi primary VI

  Ive stuck on a very simple data flow problem here, I would like to convey the data queued in the Subvi and dequeue in the main loop of the vi consumer. Ive attached the vi, since im already stuck on this problem, I was hoping I could learn a few things, especially implementation action engine in this situation

  Thank you.

  Your Subvi makes no sense since your loop will always leave after the first iteration and you always initialize your counter to 0 whenever run you it. This is a problem.

  Your code also suffers from several places that are made by the queue data. You will get undeterministic behavior since you do not know which dequeue will get the first data. In general, for a producer/consumer using the architecture queued one or more loops loops should be given enqueueing to the queue. A single loop must be made of data. These loops shuold run in parallel to each other. In your code, you can only run your Subvi whenever you press the Start button and as said you will always show the value 1 to the queue. What you need to do, is to have your Subvi managed independently once it is started. Use "Start Asychronous CAll" to start your Subvi when the Start button is pressed then let it just run. Have it post the meter to the queue. Your lower loop in main VI should remove the values and display them. You need not wait in this lower loop since it is the purpose of the dequeue. This loop will be inactive if there is no current data and run only when the data is in the queue.

  In the upper loop of your VI main remove the dequeue and the queue. You don't need them as the Subvi is all that is necessary to validate the data in the queue.

  Try this:

  

  

• Shift problem

  I always had the problem of lag in plaing games. The data on my computer used a lot and have only 18.7 GB left. Is this the reason why the computer lag? If so, how can I solve this problem? If not, what the problem is?

  Hello

  The shift could be a combination of things of a general lack of maintenance on your computer to the system requirements of games being too expensive for graphics capabilities and of your system's RAM

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  @@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Mobile data connectivity problem

  My phone shows that is has 4G in the status bar, but my application does not connect to the internet. But when I restart my device it becomes normal and same problem arises again. Can someone give me a permanent solution.

  Try the procedure described in this article to see if they help.

  If you cannot connect to a cellular network or cellular data - Apple Support

• iPhone 5 c data connection problems

  I have a 5 c iPhone running iOS 9.3.1. I can't connect to a data connection. I have 3G and LTE on and off homelessness. I was not able to connect to a given since iOS 8.x.x connectio. When I enabled cellular data, it said 3 G in the top left corner and finally changes to 1 x. If I try to load a website in Safari, I get a pop up that say 'impossible to connect to the Internet' or 'a cellular connection is not currently permitted. I had to have my SIM card fixed, so my operator gave me a replacement phone, and the upper left corner says LTE when I turned on a data connection and it worked by the fine.

  lelandsc wrote:

  I had to have my SIM card fixed, so my operator gave me a replacement phone, and the upper left corner says LTE when I turned on a data connection and it worked by the fine.

  What do you mean that you need to get your SIM card fixed? It sounds like one of two things that cause you problems, either there is a problem with your SIM, or you need to troubleshoot your phone. Have what troubleshooting you tried? You don't list everything, and if you suffer from this problem since iOS 8, I would ask why you do not have the home phone? Who provides a service for your device, Apple, an Apple authorized service provider or your carrier?

• SSHD Toshiba MQ01ABD100H - Firmware / data recovery problem

  Hello!
  I have the mission critical data on a MQ01ABD100H of Toshiba to SSHD which was in a Sony VAIO for less than one year who decided to stop working from one day to the next. All I care about is the data. A professional data recovery company apparently reputable rated player, told me that it was a "mechanical failure", said they could recover the data and gave me a quote of $1500.00. A week later I was told something different; They said the platters and heads seem to agree and the problem seems to be on the circuit board and/or flash drive, and they didn't know how to recover the data. They told me that they have consulted Toshiba too. I asked them if they replaced the pcb Board and they would not tell me or answer questions more. I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  Here's what I know for sure; the bios of the machine of Sony VAIO Windows 8.1, correctly recognizes the drive. However, it does not start and is not accessible or recognized with cmd prompt Windows 8.1 UEFI options. The drive is not encrypted. After putting the reader into an external enclosure and its connection to another Win8.1 machine, the player starts with no extreme sounds of survey. Slowly, she clicks a few times as if the heads are looking, but then calms down and keeps running quietly. I have installed a Data Rescue PC3 software that recognizes the drive and its attributes correctly but can't read or clone. I have the Partition Wizard software mini tool, which recognizes the drive correctly, but shows the drive as being unreadable.

  That's what I'm trying to do. I'm looking for a donor on mine, with the same model drive, date, firmware, site, number of PCBS, hard drive code.

  Now, here is my unknowns and I appreciate everyone a preview with these. If I change the pcb edge myself, I need still more likely transfer the firmware for the new Board of Directors, even if I try it without doing it. I don't know where the firmware is stored, is there a rom chip or is it stored in the Flash Player. I'm not certain if, with this model of SSHD, if this can be done with replacement of the chip or the software? If it is stored on the Flash drive how is available independent of the HHD part? Must the reader Flash itself be harvested? But what happens if the flash player is bad, how can the firmware ever be recovered? Any ideas anyone? ... other than myself shot in the head, I'm kidding. I think that this may be a common problem that will often not resolved.

  I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  I am not an expert but if applications cannot access the data and cannot read data from the SSHD then you will need professional help...

  I found the storage Toshiba page where you could get details on this SSHD
  http://Toshiba.SEMICON-storage.com/e...ient-sshd.html

  Mate good luck...

• Data burning problem

  HI I have a problem I have a satellite A60 662
  the Sd - R6112 dvd burner I can Burn dvd and CD music of Pentecost but when I burn the files data my nero said burn it well but when I whant to verify he cant wrid cd it's like he can't find someone who maybe now, but when I look in the folder , I can see her there, but it does not open I hope you understad me pleas help

  Sorry for my English

  Hello

  If you have a CD and DVD burner, you must pay attention to certain things. First, you must select your type of disc (CD or DVD). After that, it is important to choose the right category (data CD, audio CD, CD audio and data). After that, select a task, and you can burn successfully. Please be careful to choose the right category.

  I use Nero too and I've never had any problems.

• Internal battery / Date/time problem

  My NEX-6 will only keep the date/time information after I put it. He was dead when I got it, but after the normal battery charging to full and using the camera, whenever it is turned off, it forgets the time. I did some research online, which said it may take a while to recharge the internal battery, but I tried to charge for 24 hours straight, and using the camera frequently (as described in the manual) and doesn't seem to solve the problem.

  Once, after leaving unused for a few days, I noticed that he miraculously started saving the date correctly, even when it is off. This lasted about a week, but now he has lost the ability to keep the time again, and with the charge Jack did not set.

  Any thoughts? Apart from sending to Sony to repair?

  I tried the factory reset but that did not work. As I don't have a battery (and don't want to buy a second, in which case it is not the problem), looks like I'll need to come back for the service.

• Apps to use cellular data have problems.

  I only turn on applications that require mobile data. But when I disable it, it just turn when I return to the cell phone in the settings. I tried to use the app, but it says cellular data are disabled, then I checked the settings and it's THERE. I came across a vicious circle then. Help, please!

  My apologies to all of you who took the time to read this post.

  But it looks like a simple reboot your device will solve the problem.

• Data connection problem Note Lenovo K3

  I recently purchased the Lenovo K3 Note from the sale online in India.

  I am currently about homelessness on the Vodafone network and I am facing problems using the data connection (3 G) on the phone.

  I can use internet without any problem the WiFi but I can't connect to the internet using my active data connection (3G), even though I have an active data plan. I tried to download the internet settings of my network provider, but they do not seem to recognize this device / do not provide automatic internet settings for the K3 Lenovo's Note.

  I also tried to restore default settings under the names of access points in mobile networks, but no help.

  KV1 wrote:
  Hello, follow the same instructions
  Settings > mobile networks > Switched data roaming option WE > open network opertaors > selected operator > is turned off and turned back on - na NOT WORKING... Please notify

  Contact your service provider to restore the internet connections.

  Ask them specifically for the APN settings

  (Settings > mobile networks > access point names > name for example: OPTUS YES INTERNET)

  APN - yesinternet;

  Type AFN - by default,

  SUPL; Proxy - undefined... etc)

  Turn ON the phone

  Data roaming should be on

  Cellular data must be turned on

  (My phone works fine on 4G now)

• Transfer config data refnum problem

  I have problem of storage and transfer of value of refnum of configuration data.

  The value displayed using the seam of the probe to be OK, but it is not accepted as soon as a continuous run is used.

  The attachment shows what I tried.

  How the value of refnum of configuration data can be managed?

  Do not use run continuously.  It is designed for purposes of debugging, not to run your code normally.  If you need your code to continue to operate, put in a while loop (with a sort of timer loop as the function of waiting (ms), while it is not run as fast as possible and consume all your CPU time).  The use of "Continuous run" is like hitting the button run over and over, and some things reset each time you press the run button.  For example, whenever a first level VI ends, all the references he opened - queues, file references, TCP connections, etc. - are closed and become invalid.  This is what you see - whenever the VI ends, it closes the file, so well that the refnum still contains a value, that value is therefore more a reference valid to a file.  Use some time to keep your code running in a loop instead, and it will do what you want.

• Data flow problem

  I tried diligently to understand and implement the correct data flow in Labview. I have a slight problem, now that I don't understand. While inside the loop internal (while loop) and data acq is running, the program does not query the capture button so it will hang in an infinite loop. Since the acquisition of data is configured to read a single sample, my logic says it should do exactly that and query button. I use that as a DAQ simulated at the present time, no hanging physical Board card. May this be the problem? Or is my simply wrong flow data?

  There are a few problems.

  • You don't need a wait in a loop that has a structure of the event.
  • Your case of timeout is not necessary, he asks basically just the back button. Best is to create an event for the back button.
  • Yes, what's good is a structure of the event if it is blocked with an inner loop of maintenance events. You can use the outer loop for everything, it can turn plugs as well through the timeout event.
  • You should have logic to prevent the capture up to this as configured.

  Attached is a quick project on how you can change things. Because I don't have DAQ, I can not test, so there are probably bugs. However, you should be able to see the main ideas.

  Let me know if you have any questions.

• CRIO-9066 FIFO data conversion problem

  I'm having a problem with a multiple element SGL FIFO on a cRIO-9066 where data is not read correctly.  Here is the configuration:

  I have two Host - to - Target FIFOs, identical except for type: FXP is the other SGL.  Both are 16-element.  Data SGL which are read turns a conversion error.  A sample minimum (2014 for the 9066) project is included.

  The example works fine if the FIFO SGL 1-element; something more big fails.  Is not supported on the same 9066 thought that the project allows the creation?

  Thank you

  David

  It seems that maybe it's a bug in the Simulator.  Exit the simulation mode, run it on your target and watch the interactive mode in this way.  The results are what you expect.  It is strange that they would be converted at some point.

• "DB tools Insert Data.vi" problem in LV 8.6

  Hi all

  Someone had a problem with the new "DB tools Insert Data.vi" in LV 8.6?

  He broke my method to record variations in the data base (engine Jet4, win XP, Office 2007) without caveats.

  All ideas are welcome.

  Pawel

  I tested the DB_test_simple.vi with MySQL database. Data can be inserted into the table. The error occurs when you convert Variant data after the database querying. See the screenshot. Database Toolbox knows that Variant refers to an integer I32 actually. If you look at this table after insertion, there is column b is of type integer. If the questioning of this table will give you these '10' as Variant data to I32, but not from variant to variant. Change the type of entry that the variant of Data.vi as the sceenshot, your VI will work well.

• Clock of endurance causing data connection problems

  I use my Z5 Compact with all the options under Mode endurance running, however, I have noticed pick up my phone to use, the data connection is not available immediately, instead I have to wait for about 10 seconds before I can use any data.

  I have been trying to isolate the issue here and it seems that as long as I've got stamina clock disabled, all right. I only noticed this since the recent update of the firmware, but not sure that this is the cause.

  Everyone knows about this problem?

  When the clock of endurance is activated, there could be a delay for the data connection. It is planned to fix in the next update of software.