Time Capsule and Airport Express keeps disconnecting

Similar Questions

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

• Extend the reach of the WiFi with airport Time Capsule and Airport Express

  I want to extend the range of my WiFi network running on a Time Capsule with an Airport Extreme airport. The Internet, ADSL, signal goes from the cable box in a closet and has two Ethernet cables connecting the box. I installed a simple Ethernet switch and ran inside, with both Internet cables Ethernet Miss and in two rooms in my apartment. I created the Capsule of time like the WiFi router, then the Express in the other room in Bridge Mode to extend the range of the WiFi network and enable AirPlay. This configuration works well for a while, but after a certain time has problems. The Express seems to go back to the creation of the WiFi network on its own and I saw the problem of the conflict addreses DCHP.

  What seemed to work correctly using the Express as the "pivot" and I fell straight Internet on it and an Ethernet cable to connect the Time Capsule in Bridge Mode. It's far from ideal for me, however, because I like the Express to be in another room to extend the range of the WiFi network in this part of my apartment and be able to use it for AirPlay.

  Help, please.

  If you could let us know what operating system you use on your Mac or PC, we'll give you a configuration suggested for the AirPort Express, which will allow the Express and the Time Capsule to connect to the Ethernet switch and perform correctly.

  We assume that the switch and the wiring will function properly in your current configuration, as well as the time Capsule, is that correct?

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• Airport Extreme and Time Capsule of airport work together?

  I have time capsule and airport extreme. I need to decide if I should sell Airport extreme or is there a way for the two to work together to expand the wifi. Airport extreme can be connected to time capsule and extend the range?

  AirPort Extreme can extend the time Capsule network in one of two ways:

  (1) for the best performance, the AirPort Extreme is located in the heart of the area where most of the wireless coverage is needed, and it would connect to the time Capsule using wired Ethernet wired, permanent.

  (2) AirPort Extreme can connect to the Time Capsule wireless network and to extend the network in this way, if you're ready locate AirPort Extreme to halfway between the Capsule and the area that needs more coverage wireless... And... accept a drop in performance of half of the potential maximum speed on the network.

• setting up time capsule and express wired after disconnection of the airport

  I have a 2 TB Time Capsule and three 3 wired express airport throughout my house.  I know that when I added first the cable express, that I had to call apple to change some settings.  Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule.  Any help would be greatly appreciated.  Thank you

  If you think there are setting changes, then it would be better to start over.

  • First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
  • Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
  • Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
  • Once the TC has been configured, verify that the clients on your network can access the Internet with it.
  • If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
  • We will now configure all of your base stations for a roaming network.
  • Power-up one of the three stations based AirPort Express.
  • Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
  • Do the same for the other two express base stations.

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  Open Airport utility, select the Time Capsule and then use the option erase to erase its contents.

  How to check or erase a disc AirPort Time Capsule - Apple Support

• Time capsule and extreme; Cannot create the roaming network

  Problem: when you try to create a network roaming with time capsule and extreme, the wifi hangs and the network is up and down. Here are my deets:

  TC and extreme as well have the latest firmware of the 7.7.7 are the latest generation of products, purchased in the last 12 months

  TC is connected to Arris SB6183

  ISP is Cox North san diego County

  TC is then connected to the netgear GS105. (upstairs)

  NETGEAR GS105 then connects to GS108 (down in the patch panel in the closet of the master bedroom)

  1 x GS108 port connects to extreme

  I can get the stable network and works correctly as long as I don't have connected and extreme.

  I followed the instructions provided by apple in their "how to set up a roaming network.

  I have hard reset the devices apple repeatedly in my attempt to get things to work

  I started a Wan shortly ago at the connected WiFi and that was stable and work for not more than 30 minutes and then it went offline.

  So here I am now. Unable to get back online and stable with two apple devices connected network.

  System was stable and working well before the upgrade to 7.7.7. I had a wifi connected network not a roaming network at the time.

  Any suggestion would be great and really appreciated.

  Thank you

  After screenshots of the TC and AE installing airport utility.

  I suspect that you simply have something set wrong...

  Main error is to use extend wireless when it is connected by ethernet... This will create a loop and bring down the network.

  The two units must be defined to create a wireless network... both must use the same name (SSID) and the same password, but must be set to different channels.

  It is almost impossible in this case crashing the network since the two are completely independent Wireless Access Points... (WAP).

  The TC must be in router mode... EI must be in the bridge (bridge mode off on the network tab.)

• Time Capsule or airport repeatedly loss of internet connection

  Greetings,

  Last month, I had a problem with my Apple Time Capsule and my cable company router intermittently lose Internet several times a day between.  This has happened several times a day.  My Time Capsule, Airport utility would show a 'green' status, but the status of 'Internet' is yellow.  It would resolve itself after several minutes, or if I rebooted the time Capsule.

  I did some troubleshooting and here's what I've been able to determine:

  • My internet business is the spectre of the Charter, and I use a Modem Arris.  The lights on the modem showed upstream internet connection was good, and technical support of the Charter stated that it was not a problem between the servers and the modem.  So, this seems to be a problem with the connection between the modem and the time Capsule.
  • Digging in the settings of the time Capsule, I noted that at one point defaults under the utility Airport-> Internet-> Internet Options-> "Configure IPv6" on the Time Capsule has changed its 'Link-Local only' to 'automatically '.  I am not sure when this change happened, but maybe with Time Capsule 7.7.3, firmware which I installed it right around the time the problems started.
  • I changed the IPv6 of Time Capsule settings go back to the "link-Local only" and since then have not lost to the Internet once

  So it seems to be an incompatibility between the IPv6 to my ISP configuration and configure IPv6 'automatically' on the Apple Time Capsule.  At this point the IPv4 and IPv6 protocols are still supported in the internet, but once IPv4 disappears at some point in the future I'll have to change the settings.  I hope that by then an update of the firmware from Apple or the modem from my ISP will fix this incompatibility.

  Hope this is useful to someone else!

  There is a document with settings for routers airport Apple on IPv6 with Comcast... I know that it works with TWC and it will probably also work with the Charter.

  http://mydeviceinfo.Xfinity.com/download.php?file_id=35

  There will be problems with dentition with IPv6 for awhile... Cox is the principal who is problematic at the moment and there are a number of positions that have also recommended parameters.

  IPv6 can also work if you use IPv4 dns servers of google... So the same instructions as the above document, but just simply replace the ISP DNS with values of google.

  Your Arris modem can also be a problem... We have noted problems with the model AC AE and TC WAN port with a number of modems... It's completely outside the issue of IPv6.

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

  My time capsule airport works to my iMac and my Sony laptop win7.

  I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

  Help?

  Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

  Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

  However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

  Step 1. Check your network configuration.

  To check the settings of network configuration for the correct IP address information, you can do the following:

  • In the command prompt window, type ipconfig/alland then press ENTER.
  • The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
  • If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.

  Step 2. Try to repair the connection.
  Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:

  • Click Start, click Control Panel, and then double-click network connections.
  • Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.

• Airport Extreme and Airport Express remove blackheads effectively.  The Eeco seems a better solution.

  Airport Extreme and Airport Express do a bad job to expand the WiFi connection in a House.  The Ethernet port on the Airport Express doesn't seem to work.  The Eeco product seems to have done a better job to extend a Wi - Fi network in a home.

  You posted your comments as an issue. You have a question or a problem that you want to get help related to Apple network so that we can try to help you to?

• AirPort Extreme and airport express bought in Europe will work in the United States?

  AirPort Extreme and airport express bought in Europe will work in the United States?

  Airports will work on 100-240 Volts and 50/60 Hz, so they'll work wise power, about anywhere in the world, assuming that you have a power adapter to change the European plug to a US plug.  A voltage converter is not necessary.

  European wireless operated from 1-13 and the United States channels 1-11, so you will need to make sure that you use 1-11 If you want other users to be able to connect to the wireless signal.