Time capsule 'unexpected error' despite the reset and the IPv6 local link configuration

Similar Questions

• Apple Time Capsule "unexpected error".

  I did have slow speeds on my network lately and checked with Comcast to see if it was their end. They assured me that it wasn't, so I decided to do a reset on my router from Apple and see if that helped. I did a full factory reset with plans to start over. Now however I am not able to configure my Airport.

  I tried on my iPhone, iPad and Mac. All devices are completely up-to-date. IPad and iPhone, I can only find the configuration in the menu wifi, airport did not appear to me in the iOS version of airport road. On Mac, I find the time Capsule Airport Airport utility (under "other Wifi devices") and can scroll through the complete Assembly (name, password, etc.), but when it happens at the end it begins "Looking for"(insert network name)"" and times out after 4 minutes with "unexpected error. Please Try Again ".

  The strange thing is before I try to configure the router I can see in my WiFi menu and I am able to use the internet very well, but it is not guaranteed and not configured.

  I have tried what seems like all combinations of the implementation without success. Time Capsule airport had a recent firmware update probably two months ago. Not sure if this affects what it is.

  Search for answers until I try to buy a new router. But it doesn't seem like the Time Capsule is broken, just something odd current. I already used this same configuration for more than 9 months with little or no question. I feel like I tried something! Would like answers. He likes guys.

  Data sheet:

  Time Capsule 1 TB Model #A1355

  Modem: ARRIS DOCSIS 3.0 SB6141 SURFboard

  MacBook Pro with El Capitan

  iPad 2 Air with iOS10

  iPhone 6 s with last iOS9

  Example of installation.

  

  When everything has failed, you can configure the Capsule manually without having to use configuration of 'sorcerer' Apple...... but the process can be a bit complicated.

  Need to connect your MacBook Pro to the time Capsule using an Ethernet cable for installation. If your MacBook Pro doesn't have an Ethernet port, you will need to use an adapter Thunderbolt to Ethernet... one point really handy to have around, if you have not already. More info here:

  Maid in Gigabit Ethernet Adapter - Apple

  Please advise on the possibility of trying to use Ethernet for configuration... and whether or not you are able to use this option.  No guarantee that it will work for you, but it has worked for me several times during the normal installation translates into repeated errors.

• can't see time capsule, but can use the wifi and mount

  I have a 5th Gen (A1470) Time Capsule on our network. The WAN ethernet port is connected to a router. The TC has a static IP address, Wifi is enabled (on the TC) and router mode (bridged).

  I have hard reset the Time Capsule and reconfigured as above before you perform backups on all devices.

  We have two iMacs, two MacBook Pro and a Mac Pro (2009) backup fine both via ethernet (via a router and also directly in the transport CANADA ports) and connections Wifi of TC. One of the iMac running Yosemite the rest are El Capitan.

  However, I have an iMac on the WiFi network that cannot find the TC in the Time Machine or the Airport utility preferences. However, it can join the network Wifi of TC and attach it using the Finder. I've also disabled Wifi and iMac directly connected to an ethernet port on the TC, but he can't find it in the Time Machine or the Airport utility preferences.

  I followed the instructions from LaPastenague to Re: utility Airport can't find Time Capsule. I also reset the PRAM and SMC. No luck.

  The iMac is a 2011 model.

  I have an iMac on the WiFi network that cannot find the TC in the Time Machine or the Airport utility preferences. However, it can join the network Wifi of TC and attach it using the Finder. I've also disabled Wifi and iMac directly connected to an ethernet port on the TC, but he can't find it in the Time Machine or the Airport utility preferences.

  Just to check... what operating system is this iMac?

  You have ipv6 local link only the value... This is important.

  Make sure your network is running DHCP and DNS address is the same as the other computers.

  Make sure that the computer name is short, without spaces and pure alphanumeric characters.

  No luck, it's time to do a reset of the TM.

  Pondini instructions still work.

  I would remove plist Time Machine and redo the configuration... you don't lose the current backup... you may even do this...

  A4 here. http://pondini.org/TM/A4.html

  Honestly if that don't fix it... it is time to download and use Carbon Copy Cloner... because the TM became too difficult...

  Depending on what operating system you are on. TM has a version of command line... TMutils.

  I would like to confirm Apple it have not eliminated.

  I rarely use... I think that if it does not work via the installation of normal preferences... then it became time to use CCC which is what I do. Or run them both so I don't have a good backup.

  ne.html http://www.Macworld.com/article/2033804/Control-Time-Machine-from-the-Command-Li

  Some commands should be useful just to see the installation program.

  for example

  tmutil destinationinfo

  > ==================================================

  Name: TimeMachineBUP

  Type: network

  URL: afp: / /; AUTH = none % 20User % [email protected]/TimeMachineBUP

  ID: CFD5ED31-5884-47E7-8575-D29F65C044D8

  ====================================================

  Name: data

  Type: network

  URL: afp://Ray%20H; [email protected]/data

  ID: 2FB1A587-CD30-4A62-A4E3-2743C9C22469

• Time capsule not recognized in the utility of the AP

  I have two time capsules air port on the home network. As of today, both work well, with green lights, but neither are appearing in airport utility. It is said: "device not found..." Formerly part of the network. Check it again in the range, turned on >... It is powered from the etc"with green lights on both... My last backup to the iMac, a. 17:40 Eastern, 11/08/16 So I think that what ever happen, happened at this time. 1 APTC is 2 TB, the other 3 TB. CT 3 is about 9 months old and the year of the old era. Any ideas? /

  It is usually the simple problem of DNS.

  Put the whole network and all customers.

  Begin again in the right order.

  Modem,

  TC1

  TC2

  Clients.

  With a gap of 2 minutes between each device which is dependent on the other.

  No chance we will need you to learn about what the connections are and what is the brand and model of the modem.

  Make sure the computer you have IPv6 set correctly... for most of the people who don't, but for some cable that has now updated for ipv6 link-local... He now can be set to a car.

  Here is an example for wifi.

  

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get 'unexpected error try again later' and Muse does not.

  Whenever I'm lunching Adobe Muse I get 'unexpected error try again later' and Muse does not.

  Hello

  Please close Muse and then delete the OOBE folder by following the steps listed in this document (listed in step 1): http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html

  Once completed, run Muse and connect to see if it works.

  See you soon

  Parikshit

• When you try to copy a .jpg file in another folder I get an error "unexpected error prevents the operation."

  This is the error I got trying to copy a .jpg file in a different folder.

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0 x 80070021: the process cannot access the file because another process has locked a portion of the file.

  Any help is very appreciated.

  This is the error I got trying to copy a .jpg file in a different folder.

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0 x 80070021: the process cannot access the file because another process has locked a portion of the file.

  Any help is very appreciated.

  Apparently, Windows has a problem to download files larger than 50 MB.  To resolve this issue, follow these steps:

  In a security update, Microsoft has limited the size of files that can be downloaded from the remote folders to 50 MB. To increase this, you must change a registry setting.

  1. Download FileSizeLimit.reg
  2. Double click on FileSizeLimit.reg
  3. If necessary, enable the registry editor to run
  4. Click the Yes button to allow the changes need to be made
  5. Click OK
  6. Restart your computer

  For more information, please see the Microsoft article 900900 Knowledge Base.

• Our time capsule will blink a light amber and utilities said that it is overheating. What is the problem?

  We had a problem with our (less than 2 years) time capsule - the light yellow flashing, the fan runs often and looking in "utility" on my mac, it says that it is overheating. What is the cause of this?

  The Time Capsule fan runs constantly, so you shouldn't be aware of the fan running on the time Capsule 'often'.

  If you receive a message that the Time Capsule is overheating, there is probably a problem with the internal power supply on the Time Capsule.

  If you have an Apple Store near you, it would be wise to take the time Capsule to let the experts check the issue and discuss your options.

• When I tried to re install Windows XP, I received an "unexpected error" at the end of the installation. The computer then restarts and it gives me the error again.

  Hello

  I did a clean install on winxp pro, it ended by an "unexpected error", it will not install, shows me the error and restart try to reinstall and same error. I checked around and it could be due to the intallation disk which was scratched and unable to read the files (I tried the disk image and failed). I made a copy of the disc as soon as possible, but it is bootable. I tried putting in the cd copied, tried to locate the file but could not (don't kn OW the drive and folder).

  Is there a way to make the copy bootable cd? (in my pc, I made a copy of the Setup disk) or is it all the same to overcome this obstacle?

  Thanks in advance.

  Richard

  original title: clean install went wrong

  Hello

  What is the full and exact error message?

  Read the following article.
  Error message "an unexpected error has occurred (536821760)" when you try to install Windows XP
  http://support.Microsoft.com/kb/316400

• Time capsule starts only after the last update

  My Time Capsule (A1409, 2 TB) is do not restart after having applied the most recent update. Has worked for years in my small locker in the basement connected to my local network. Fan seems to be working (vibrations of feeling) which connection to the power source, but the LED shows NO color. HW-Reset either doesn't help not. Probably from power supply? As the machine is not under warranty, what are my options (all) to retrieve the data on it?

  Other options apart from opening and get the HD out and connect it to a USB box to retrieve the data?

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  Thanks for any input / advice / tips.

  Bonus question: any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  Probably from power supply?

  Vibration isn't the hard drive running... the fan... feeding is very well... the jury has no... was triggered by the update of the firmware, it would have happened soon anyway.

  What are my options (all) to retrieve the data on it?

  You MUST open the TC... There is no way to access the data except in order to open it... However, you can repair the TC using this method.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  It sounds gross... but has a long history in the world of Apple as a faulty weld is not a new problem.

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  We recommend that you do NOT. It is often not successful and it is better to keep an archive on a USB drive for a few months and once you have a decent amount of history to put the USB back to other uses.

  You can copy the sparsebundle to each computer... Apple has a set of instructions--small as usual.

  Backups transfer TM...

  Doco Apple. http://support.Apple.com/kb/ht5097

  Pondini doco http://pondini.org/TM/18.html

  Any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  A TC has only a function of archive built in. Whenever you press on archive it backs up the entire TC on USB... not possible for incremental backup.

  You can work around this by using Carbon Copy Cloner... which can save almost anything to almost anywhere... However, it is extremely slow more wireless when the backup drive is plugged into the USB TC rather than on the computer... To copy all packages to TC on computer... computer to TC... TC on the USB drive.

  On ethernet, it is full duplex and should work ok... but it is always faster to plug the drive into the Mac and so you travel go simple package.

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  I would certainly use the QNAP but with Carbon Copy Cloner rather than Time Machine. It is much more reliable and flexible... Although it lacks the possibility of several version of TM.

  A dual strategy of backup using TM and CCC is well worth... make clones bootable from all your computers on USB auto powered 2.5 "drives suitable size for each computer.

• Time Capsule not recognized after the replaced logic board.

  Time capsule is not recognized

  I too am in the same "boat" as 'bruf' and 'Pitbullover' my Mac Book Pro had a card failure logic as well as graphics - warranty - replaced but now the MBP does not recognize Time Capsule.  Directly linked to the time via an adapter for MBP port capsule.  It was working OK before the Mac went to repair.

  I followed the great suggestions of LaPastenague (thanks for all the time and expertise you provide other users of Apple).  Tried the factory reset button, but no result. (By the way there is always a flashing amber light on the TC - is this usual?)

  Checked the Finder - showed the distance disc - but no mention of a time Capsule.

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  I will follow this thread with interest in the hope that the wonderful 'gurus' out there can suggest a solution.

  With satisfaction!

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  Even if it is not used as a router, it is usually easier to him have plugged into your router main and fulfilled.

  What model is the TC?

  This modem do you have? Brand and model please.

  the time Capsule.  Directly linked to the time via an adapter for MBP port capsule.

  Exact details... which adapter... has this crush on ethernet?

  Or Ethernet USB...?

  It could also be a USB wireless... but probably not.

  Have you tried the manual configuration method?

  https://discussions.Apple.com/message/29612657?ac_cid=sa123456#29612657

• Time Capsule guard disconnect from the Internet

  I'm having a problem with my internet, and I'm running out of things to try. I've got the most recent Time Capsule with connection ca.

  I have replaced the cable modem and have removed my extender. Always get disconnected every 12 hours or more. I can still access my local network, just the internet disconnects. I did a hard reset and replaced the cables. Unable to connect WiFi devices. What are my options?

  Unfortunately, we do not have much in terms of specific details that would help us to try to understand what the real issue here might be... the things you may already have... but did not mention in your message.

  You connect your computer directly to the modem a few days see if Internet connection "holds" that way... or... If Internet disconnection problems still continue during the period of "test"?

  Have you had a technician from your Internet Service Provider (ISP), come out to your home to inspect all cables and connectors associated with the Internet line?

  What is the number and the model of the modem?  We ask this question because there are a few compatibility problems between the series SB-Motorola/Arris modems and the newer 802.11ac models of AirPort Extreme and Time Capsule from the airport.

  Who is your ISP?  Most of the suppliers are in the current process of implementation of a new type of Internet connection called IPv6 in their current systems, requiring updates and changes on the system that are supposed to happen during the night gently... but sometimes cause a loss of Internet connection in the process. IPv6 implementation goes relatively smoothly for most suppliers, except a major player in particular who asks various questions documented with current Apple routers.

  Finally, there was some problems power stability on newer routers AirPort, causing a momentary intermittent loss of power resulting in an interruption of the connection when the airport restarts automatically. This question is very difficult to catch, because it happens very quickly and it must almost be watching time to know that it took place at the airport.  If everything else goes out, it may be the router from the airport that needs to be replaced. I personally had this problem, and the only solution was to replace the AirPort base station.

• 2009 time capsule cannot connect to the internet via a modem

  I had my 2009 Time Capsule or airport works very well with the modem from my ISP for years. I use the TC a hub wireless and backup. The upgrade of the modem: no problem. Over the weekend, there was a failure of the internet that has since been corrected for days. Since my TC failed to connect to the internet via the modem. I can get online via an ethernet cable from the modem to my two computers (one is a janky PC, the other bought a MacBook Pro in 2015), so I know it's not the modem.

  I turned off and reset the modem several times. I turned off and reset the TC, repeatedly. I've reconfigured the TC twice per the instructions found in other discussions here. I _may_ not having the latest version of the software installed, but this has never been a problem in the past. Reconfiguration will display a green light, but in the diagnosis of the airport, it shows that it has not Internet even when connected via the Ethernet cable to the modem to work. Icons wireless on my laptop an exclamation or a warning icon.

  The cable operator suggested that sometimes the router manufacturers 'close the ports' and must be reopened if the connection is down for awhile. It makes no sense to me, but I'm not very technical.

  Any thoughts? Thank you very much

  Renee

  What is the number and the model of the modem?

  There is a connection by Ethernet cable from the modem to time Capsule. The cable is connected to which port of the modem?  The cable is connected to which port on the Time Capsule?

  If you open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)... is displayed the image of the time Capsule?  If Yes, when you click on the image, a small window pops up with an edit box... or... an option for installation manual appears at the bottom of the window?

• Time Capsule loses connection to the internet every day

  I have a time Capsule airport of 5th generation TB 3 (802.11 AC, A1470).  For the past year, I lost the connection Wireless to the internet once a week or more.  In recent weeks, he has taken place more frequently and often now also 3 - 4 times / day.  During the internet cut, the light on the Time Capsule still green watch, but none of my devices are able to get to the wireless (3 iPhones, iPod Touch, iMac and 2 MacBook Air, Bose Speaker).   I can restore internet connectivity by cutting and then by restarting the power of the time Capsule.    All phones and computers are running the latest software updates.  Airport Time Capsule is running 7.7.3

  We do not know if you have a service provider problem, a problem of modem or a matter of Time Capsule.

  Provider number... check with your service provider to ask them if they are experiencing loss of momentary service due to new installations of equipment on their service. They will most certainly say that their service was perfect and the problem lies elsewhere, but it does not hurt to check.

  Modem question... If the modem loses its connection to the service from the provider, even just for a moment, then the Internet will go down and the time Capsule which landed.  Unfortunately, there is no easy way to test the modem.  All you can do is connect a computer directly to the modem for a few days and check the connection from time to time to see if it fell.

  If so, this indicates that you that you might have a problem with the son of Internet that come into your home to the wall outlet, if you do not want your provider to send a technician to check and test the line to come in your House.

  If the wiring checked out OK, then you may have a problem of modem and the modem will probably be replaced... regardless of his age. If the modem is more than 4-5 years old, then it really must be replaced at this point.

  If you have not replaced the Ethernet cable from the modem in a few years, it would be a great time to do this.  There are some modems that just don't get along well with Apple routers... Motorola 6121 SB, SB 6141 and SB 6183 come to mind.  What is the number and model of your modem?

  Matter of Time Capsule... If there is no connection drops during your modem 2-3 days 'test' with a computer connected directly to the modem, then the time Capsule becomes the suspect.  About everything you can do in this case is to reset the device back to the default and then put settings in place again to see if this will help the issue. If you don't want to do it... and you have an Apple Store close to home... you can take the time Capsule to them and make them run tests on the Time Capsule.

  As you can imagine, 99 times out of 100, no problem you will find when you take the Capsule in the Apple Store because the drops intermittent are by far the most difficult problem to resolve.

• Time Capsule will not extend the Airport Extreme network

  My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time capsule said Airport utility cannot extend the network and I should make sure the password is correct, that it is in the signal of a network, etc. I went through the settings of the time capsule by ensuring that passwords are correct. It is certainly within the range of the signal of the airport extreme (they are both in the same place as always... Besides, I put my iPhone next to the time capsule and I get a signal strong). I tried a hard reset of the time capsule. Of course, this does not work.

  Time Capsule seems to be communicating with the computer very well. I can access it via the Airport utility and reboot. I can access the data on its disk backup. Airport Extreme is to give a signal of good wi - fi connection. I'm still able to pick it up with my computer (even if my computer is far more than the time capsule).

  Someone has an idea of what's going on?

  Given that the Capsule does not correctly connect unless everything is OK with the AirPort Extreme... I suggest that you turn off the time Capsule for now and check that everything works correctly on the AirPort Extreme.

  My airport extreme (do not know what version... can't even find it in the system report)

  You say that the AirPort Extreme does not appear when you open AirPort Utility?

  If so, press and hold the option on your Mac key while you double-click on the image of the AirPort Extreme.

  Model of the AirPort Extreme, you will appear at the top of the summary page. What is it?

  Near the bottom of the summary page, check to see if there is a parameter that is displayed for the State.  If there is, what is the message next to status?