Time display problem

Similar Questions

• Date and time display problem

  Hello everyone,
  
  I'm having a little problem and I hope someone here can help me. I have a form and a report based on a table, let just say for simplicity that is the structure of the table:

  create table table1(
  id varchar2(5),
  date_added date)

  I have made a calculation, after submit, the form. If the end user has to put in the code. The code for the calculation is:

  select sysdate from dual

  Now, this is where I get my problem. I want to be able to display the date and time in the report. The code that I use for this is:

  select id, to_char(date_added,'DD-MON-YYYY HH24:MI:SS') from table1

  However, this produces the result on my APEX report:

  1 , 11-MAR-2009 00:00:00

  Really frustrating thing is that if I insert by using the command line, SQLPlus or APEX SQL commands I get the expected result.

  4 , 11-MAR-2009 10:32:35

  Anyone know what I'm doing wrong and how to fix my problem?
  
  Thanks in advance,
  -N.S.N.O.

  Hi NSNO,.

  I created a form as below and is entered a few entries to test the date column, which is not included in the form. It is filled by the trigger as follows:

  CREATE TRIGGER biud_events
  BEFORE the events of the INSERT or UPDATE or DELETE ON
  FOR EACH LINE
  BEGIN
  IF THE INSERTION
  Select nvl (max (id), 0) + 1 in: new.id of events;
  : NEW.event_date: = SYSDATE;
  END IF;
  IF THE UPDATE CAN
  : NEW.event_date: = SYSDATE;
  END IF;
  END;

  You can access the form and the report by clicking on the links below. Report gives the correct time.

  http://Apex.Oracle.com/pls/OTN/f?p=43368:63

  http://Apex.Oracle.com/pls/OTN/f?p=43368:64

  Kind regards
  Zahid

• Time base / real-time display problems

  I am under a layout with no hardware and simulation takes 5 X longer than expected.  But when I exit graph it shows the correct output!  Is there something to put in place the basis of time?

  The installer is completely relevant.

  Sampling rate 1000 and block size 1 will bog down the software to the point where it gets behind. Because there is no equipment, you don't get a driver error... but you would. In this case, it is just work really hard. The timestamp is based on how the time of module of data generator assigned.

  1000 and 10 is almost as bad.

  I would really like to see the spreadsheet... There are modules, such as the average module, that may need to adjust the size of the block down.

• Any instance of time displayed through Firefox is 5 hours off the coast (+) (IE Comcast call time logs, each page to print, etc.). IE and other browsers display correctly as they are all the time on my computer settings. Help, please.

  Any instance of time displayed when you use Firefox see the days off by + 5 hours. I'm in Philly so use felt all other settings are correct on the computer. For example the call time display to Comcast and every foot of page log displays time + 5 hours. I have not found anything useful in Web search. I always check after each update for Firefox but the problem persists.

  Try http://kb.mozillazine.org/Time_and_time_zone_settings

• Display problems with all types of terrain and graphic

  Hello

  I have display problems general with all types of chart, graph or plot that I try to use, on two different machines, both with NVIDIA graphics cards.  A machine is a MacBook under XP SP2 in bootcamp and the other a Dell T3400 workstation (or something similar) under XP SP3.

  I posted this thread earlier which Ben replies to the weird graphic behavior.  Ben suggested that I try to simplify my code as much as possible while keeping the bad behavior and by submitting to the NC and the forum, because it is others have had problems of graph.  I tried, but in vain.  Display problem continues and continues and continues and then they just go and I can't get back by unscrewing the last stage of reduction or simplification of code.  But at some point during the reconstruction of the code, which I cannot determine, returns the bad behavior.

  So, I was set up with graphics looking for shit, until recently, when I thought I'd try some suggestions of other messages to a XY-plot function as a graph by creating a buffer and using nodes of ownership of land for the range control.  Things seemed promising, until my "XY table" started getting shit, too.  This time, the issue was with the grid lines becomes all chopped, attached images.

  I am out of resources here.  I think I'm running out of options to display graphic data in an acceptable manner.  Do I have to display data by using an Excel chart in an ActiveX container in Labview?  I'm not skilled enough to do it again.  I like Labview, it is the only programming language that I am competent even remotely help, but it's just inferiorating.

  Any suggestions would be much appreciated.  Thanks for reading.

  -Greg

  Greg,

  is there a particular reason why you use the bar plots - view superior graphic style? Try activating the legend of the plot, go to the bar plots and select the first track of the Bar Style. Your chart is displayed very well after that.

  See you soon,.

  Cerati

• Display problems - horizontal and vertical lines

  Original title: DISPLAY PROBLEMS

  I continue to have horizontal lines and vertical fleckering, disrupting my work for periods ranging from 5 to 30 seconds at a time. My screen goes blank when this happens. What can I do to stop this problem. Help, please. Thank you.

  I continue to have horizontal lines and vertical fleckering, disrupting my work for periods ranging from 5 to 30 seconds at a time. My screen goes blank when this happens. What can I do to stop this problem. Help, please. Thank you.

  Hey EMMANUEL TORDZRO

  go to your computer or graphics card manufacturers website and find the driver download section

  Search for the latest vista drivers for your computer or your graphic card model number and download and install

  If the problem persists the graphic material on-board graphics card may be faulty

  Walter, the time zone traveller

• Brightness display problem?

  I bought this lappy (hp pavilion 2016tx g6) only 3 months back. to start, it seems having a display problem that I initially ignored. as the lappy starts beginning of brightness screen to flactuate.not proportions, but it is notable & if you work on it you can not miss. It happens a lot & don't become a kind of everyday / every time that case. I'm aware of display setting that occurs when power is plugged in & on & I assure you, this isn't what I'm talking about. It happens when I'm working on it if plugged in or out. could someone help me with that please? For those who ignore product its config is---> (3rd gen) i5, 4 GB RAM, 1 GB graphics card (Radeon) in additions to the Intel HD integrated card.   Thnx in adv.

  Hey Nick,

  Stop fighting with him.

  Call HP and ask for help.  It can be a little bad hardware... it might be something that can be adjusted.

  The guarantee is made to that kind of thing - if it's broken, whether you can get it repaired.

  Nevertheless, it is a new laptop and it should make you happy.  Get the information you need to be happy again.

  Contact HP

  Good luck!

• display problems, shut downs, restarts

  Original title: Windows 10

  I have upgraded from windows 7 to windows 10. I hate it, I have had no trouble with my computer since then, display problems, shut downs, restart ect this is the worst operating system. my computer is only a year and a half. I did all the recovery disc, the system image, repair disk and back ups from the first day. at - it someone now how to return to windows 7 or I have to take it to a tech and spend more money and time. I would also not recommend 10 to anyone unless you want a mobile phone instead of the computer. I might be old school, but I never had these problems before installing windows 10. Help

  Hello

  Use them if you want to try to fix the problems. Because the computer is not
  This old do not forget to check with the help of the manufacturer of the motherboard of the system,.
  their documentation online and drivers and ask in their forums on any

  known issues and compatibility.

  If you are a 3rd party antivirus on the operating system you upgraded OR if you have a
  now uninstall it and then run the removal of its creator tool. Use Windows Defender
  in Windows 8/8.1/10 is a complete antivirus. Despite all the hype out there
  Windows Defender and Windows Firewall are real superstars.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ===============================

  Check this box:

  Right click on start - Control Panel - the troubleshooting button - right click Show all.
  Maintenance of the system.

  -----------------------------------------------------

  Windows key + X - command prompt (Admin)

  SFC/scannow

  Note If this poster of uncorrected errors - do underneath without worrying.

  When finished that run these:

  DISM / online/cleanup-image /scanhealth

  DISM / online/cleanup-image /restorehealth

  Note If this indicates errors not corrected - do underneath without worrying.

  Then, restart the computer.

  Make sure that you run the BIOS and latest drivers available.

  Look for the updates with system Maker (manufacturer of motherboard for customized systems)
  for BIOS, chipset of low level driversand the major embedded and separate
  device drivers. Run update DriverView - VIEW driver Microsoft set hide -.
  those without drain on their behalf.

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double-click - driver
  tab - write version information. Now click on UPdate Driver (this cannot
  No matter what as MS is far behind the certification of drivers) - then do a right click - Uninstall.
  RESTART this will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and
  then device Maker (Realtek, Intel, Nvidia, ATI, for example) of the site and get their
  the most recent versions. (Look for BIOS, Chipset and software updates from the Maker system
  (website here).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  Heck manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Display problems with updates on Windows 7

  I used Windows 7 without problem for 2 years, but since 6 weeks, EACH Windows 7 update caused display problems (halos, horizontal and pink & light green streaks forming). My hardware withdraws like ok, so my only solution was to uninstall updates. I'm an artist, and my computer became unusable as tool-art. I noticed that people who use Windows 10 have the same problem. It's time to (gag) switch to Mac? Does anyone have a solution for this?

  I used Windows 7 without problem for 2 years, but since 6 weeks, EACH Windows 7 update caused display problems (halos, horizontal and pink & light green streaks forming). My hardware withdraws like ok, so my only solution was to uninstall updates. I'm an artist, and my computer became unusable as tool-art. I noticed that people who use Windows 10 have the same problem. It's time to (gag) switch to Mac? Does anyone have a solution for this?

  "We noticed that the issue has not been marked as an answer yet and we were wondering if you solved the problem."

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Yes, reinstalling my favorite of all time, Windows XP SP3 - that support has been extended. After weeks of removal of partitions, re-formatting of C drive, re - install Windows 7 and hacking and tweaking, I gave up. Then, when I started transferring files from 7 and re - install the software, my screen went new loony.

  Uninstalling Adobe Acrobat Reader removed the problem of XP.

  Eventually, I'll buy a laptop to the internet and use XP on this computer for my art and animation programs. Gossip says Internet 7 and 8 are not as secure as XP, so I'm in no hurry to buy. People are the display problems on Windows 10, too. So maybe there is a mole of Apple in the Windows technology crew.

• Display problems with PS 2014.2.2 and iMac

  I use a Nikon D 800 shooting Raw.  I load the files in Camera Raw and Photoshop.  Only with the latest version of Photoshop Creative Cloud, I have problems.  There are large squares white or black in the display of images in Photoshop.  Expansion or shirnking image sometimes take them off, but not always.  The only thing that works is completely close Photoshop and restart it.  And after some time, the problem will reoccur.

  I use this iMac with Photoshop PS 5 and everything also and never had a problem before display.

  I'm waiting for an upgrade to fix this, but there was none.

  Make sure you run the latest version of your Mac operating system. Take a look at this thread as well: large squares white or black in my pic on screen

  Benjamin

• With output window display problems Webhelp/Webhelp Pro

  Hello

  I created a few projects webhelp after being informed by our team of QA and development projects I created HTML5 format were not compatible with 1.) old versions of IE [specifically the 7 and 8 - posted another discussion on this in the last couple months, tried the patch of shiv without result] and 2) the control used by the program to display a HTML file, mounted on a given device [iOS] - what I have said, this is true for iOS 7 and it is supposed to be a new version of IOS control 8 which supports the HTML features. But we are not there right now (still need to support iOS 7), by application QA/DEV, so I created the webhelp projects to see if these work and display better on devices.

  I noticed some display problems when I generate and view webhelp output. Initially, the books in the table of contents are cut off and I have to resize the TOC pane and drag the bar to scroll at the bottom of the viewport to see. But when I do this, the button of the search field in the toolbar is cut. Also, the initial vertical scroll bar displayed on the right side of the window apply to the entire window. In other words, I can't use it to scroll upwards or downwards in the displayed topic. Again, I have to resize the overall window or drag the scroll down bar all the way to the right, how I can see a partial 'hidden' vertical scroll bar for the window in the topic.

  The Properties window to create/edit a dialog box window for webhelp and webhelp pro provides much in the way of personalization or all that I can see related to these questions.

  Can anyone offer any suggestions on how I can get the window to display correctly?

  Thanks in advance for any help you can provide.

  Sincerely,

  DH

  HA! Looks like we stumbled on the solution by mistake. I checked the zoom setting and it was 90%. This has changed to 100% and voila'! No more double scrollbar. The skin - a little Diggin ' this Global Connect we've also changed. But you can now use a scrollbar to move up and down in the topic you would expect.

  

  Thanks for all your time and suggestions to help me solve this problem!

  DH

• x 200 display problems

  Hi all

  I'm looking to help diagnose a display problem. The laptop is a Lenovo ThinkPad x 200 7454-CTO model.

  I started experiencing display problems, as seen in the attached photos. Generally, the problem would disappear after a certain time, often (but not always) when connect external monitor and / or change the display resolution.

  The image on the external screen is OK.

  The problem could be with the flat cable? I ask this, because the ThinkLight, nor the camera works. Also, I suspect that the WLAN and Bluetooth are too slow, but I have not tested that.

  Thanks for your help,

  Sasa

  Link to image 1

  Link to image 2

  Link to image 3

  Link to image 4

  Link to picture 5

  Moderator comment: images > 50 KB converted for programming. Community rules.

  I am very happy to say that, in this case, the problem was due to flat cable. I replaced the cable and the ThinkLight, the camera and the screen works well again.

  Sasa

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• The time displayed in the "Received" column is not the last time received in the headers, this is indeed the sent time.

  RE: Thunderbird email list
  I like to see the columns 'Date' and 'receipt '. I noticed that the time displayed is exactly the same in both columns, and I knew from Outlook it wasn't normal. When I checked the headers, I found that Thunderbird did not display the received time, but rather, in all cases, it is at once sent. Here is an example:
  The last "Received" line in the header is: (> > added)
  > > received: by 10.216.205.198 with SMTP id j48csp33972weo;
  > > Thu, May 22, 2014 07:25:10-0700 (PDT)

  The other relevant line is:
  > > date: Thu, May 22, 2014 14:21:21 + 0000

  Note that there is difference of 4 minutes which is not too uncommon, but 09:21 for the two columns is displayed. It is sent in good time, but not the good received on time. It should display at 09:25 in this column.

  http://blog.dmitryleskov.com/small-hacks/putting-the-received-column-in-Thunderbird-to-work/