Time (minutes) is not increment

Similar Questions

• Airport Time Capsule device not found

  I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

  Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

  You have Back to My Mac enabled on the Time Capsule?

  If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• Timer plugin does not work

  I'm stuck trying to get the timer plugin works.

  I tried to reinstall and have also tried suggestions of Patrick Wolf Adam in https://forums.oracle.com/message/9775262#9775262 , but nothing helped.

  My real need is to run a timer in the background that queries a table to see if there are all the jobs waiting for the user to action.  This task list table is filled/updated by other background processes, and not by the user.  The query should run approximately once per minute with an alert to the user if there is a task so that it can respond to the.

  I think the problem is that the timer simply will not initialize, although it is set to run on the loading of the page, in accordance with the instructions for the plugin, with a separate dynamic action for shooting at the expiration of the timer.

  For test purposes, I also tried to run a region simple refresh a table area of reports (with no title, according to the guidelines of the solution of Adam), but still no joy.

  I tried to insert a test in a fictitious table message and that is the fire (but will if I change it to a click event on a page of form element, that's why I think that the problem is the initialization).

  OTN research shows a few others with the same problem but (if indicated) solutions do not work for me.

  Is this a known issue?

  I use 4.1.0.00.32 on 11.2.0.3.0 Oracle Apex

  Thank you for the pointers.

  Hi Mark,

  Sorry for the late reply. I had a look at your application and makes two changes in your region "W & T locations".

  1. It refers to a non-existing template. I changed it to the model of the region 'Region without borders '. Note: If you use dynamic actions on the regions, it is important that the model of the region contains id = "" #REGION_STATIC_ID # ' in markup. " This is necessary to code JavaScript identify the area in the browser. Without this, dynamic actions will not work.
  2. Changed to 'Enable partial Page Refresh' = Yes in the report attributes

  After these changes the report will now update every 5 sec.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

• macOS sierra time capsule does not

  I have upgraded to iOS sierra on my MacBook 2013 and 2015 s pro on 24/09/16. The time machine-

  Time capsule has not worked since. Wifi works but not the backup. We need real expert

  help solve this problem, not conjecture. I understand that if I use others

  equipment suppliers, it can give wrong. But I'm all Apple. Help, please. I should have mentioned

  It's a new time capsule airport which was working fine until I changed the Sierra.

  Thank you

  Bill

  afternoon, this seems to be a common problem - I came here looking for an answer as well. There is a smc / ram p reset fix floating MacOS Sierra - time machinestuck preparation backup on network devices. There is also an exclusion to spotlight some suggest work. I have tried both and neither worked for me, a lot more. I ended up clear time capsule. Airport utility > change > disks > erase disk. has immediately started a new backup and have not had a problem since.

• Time Machine do not hourly backups on WD My Book for Mac new

  My 1 TB time capsule was too small for the full backup so I just bought a 6 new to WD "My Book for Mac" and have now a new back up, but it won't backup time as usual. I am running OS X El Capitan 10.11.6 Can anyone who thinks that the reason for what I fear not having a reliable backup. The problem with the new hard drive external or is - a problem with EL Capitan?

  Hello Arnaud,.

  Thank you for using communities of Apple Support. It is my understanding that Time Machine was not back up as expected. I certainly understand how it is important to be able to back up your content. I'm happy to help you.

  There are several factors that could influence the automatic backup. Please follow the steps in the link below to fix this problem:

  If you cannot back up or restore your Mac with Time Machine

  In addition to these measures, hourly backups could be affected by your sleep Macs and power Nap settings, depending on which Mac you use. To ensure that your hourly backups are finished, set your Mac sleep to a longer period time. For testing purposes, try to set the duration of sleep at least 1 hour. You can do this in system preferences > energy saver.

  In addition, if you use a portable Mac, make sure that it is connected to power during the tests to see if hourly backups work. See the link below to view information on how Power Nap works and how it can affect Time Machine.

  How Power Nap works on your Mac

  Keep in mind, that Time Machine backs up only files that have changed since the last backup.

  Have an amazing day!

• Time Machine could not complete the backup

  Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

  I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

  I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Quick Time Player does not work in El Capitan

  Now Quick Time Player does not work properly.  When I click to use it, the only thing it allows me to do is 'click to drag', while he was recording a screen, buttons disappear and the only way I can stop the recording is to go to the menu screen and exit the Quick Time Player.  So annoying!

  It also is not allowing me to change.  When I try to edit my videos and then save it, it says that it cannot save the file.

  None of this makes no sense at all.

  < published by host >

  You have a bad installation, I believe. QT works fine on my systems.

  El Capitan works very well. Sometimes, it is not for lack of the tennis racket. Review download and reinstall OS X El Capitan 10.11.4 Combo Update.

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• How compaq 8200: my computer is blinking a red light permanently four times and do not start

  My computer is blinking a red light permanently four times and do not start

  @Crownwise

  Laptops.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01732674

  Desktop computers.

  http://support.HP.com/us-en/document/bph07107

  REO

• Why Time Machine will not erase old backups when it needs more space for a new backup?

  I have problems with Time Machine.  I am running on an iMac (21.5 inch, end 2012) with a processor Intel Core i7 3.1 GHz and 16 GB 1600 MHz DDR3 memory.  My OS is El Capitan, 10.11.3 version (15 d 21).

  Since a few days I received the following Time machine error message:

  Time Machine could not complete the backup "IoSafe.

  Backup disc neds 47,49 GB for backup, but only 39,98 GB are available.  Select a larger drive for backup or do

  the smaller by excluding the backup files.

  I thought that Time Machine was supposed to automatically delete older backups when there was not enough space on the backup drive.  Am I missing something?  Is that what I can do to diagnose the underlying problem?

  -Is [Larry] is-

  When you enter Time Machine, you see windows cascading over time. The foreground window represents the current state of the data and those behind it successive snapshots of data taken by Time Machine. Is there only a snapshot (i.e. one behind the windshield), or more than one?

• Time Machine does not believe that a volume is identical to an exact volume in doubles with the same name

  • Had a player named ' external 1. »
  • He began to miss (I had another drive of the same manufacturer, and 'External 1' making the same noises as the other just before it failed).
  • Off time Machine
  • A got a new drive and formatted, calling it "new external 1".
  • All "external 1" copied on 'new external 1 "'.
  • Not mounted 'External 1' and threw it in a box that I keep for hardware failures
  • Renamed 'New external 1' on «external 1"»
  • Time Machine running and went to preferences. In the list of things to exclude the back - ups has been 'External 1.'
  • Removed '1 external' in the list of exclusions (highlighted his name and press the sign less)
  • Checked and found that "external 1" was still on the list of things to exclude
  • Repeated several times, but I couldn't go down the list

  Somehow Time Machine does not believe that the new "external 1" is the same as the first (who has done again to the top without any problems)

  What can I do to get the time Machine no no keep 'External 1' permanently on its exclusion list and the addresses as the same drive as the one I replaced?

  Furthermore, if I rename "External 1" to "New external 1", Time Machine will save it. But I can not just keep the "new external 1" name for reasons of scripts, etc..

  Inherit from a backup

  Inherit from a backup (2)

• Return Time machine will not reinstall Yosemite.

  Model name: Mini Mac

  Model identifier: Macmini7, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  1 TB HARD DRIVE

  I tried to reinstall my previous operating system which was Yosemite, on my Mac Mini, purchased in 2015.

  Return Time machine will not reinstall Yosemite.

  If I had an on. I would not upgrade!

  Hi danfromlittlerock,

  Thank you for using communities Support from Apple!

  I appreciate that you try to go back to OS X Yosemite using Time Machine. We know it can be frustrating when a process does not work the way you expect, but we are here to help.

  The following article explains how this process works. If this is the process that you have attempted to perform before, please let us know more your situation and what happens when you try the following steps.

  OS X El Capitan: revert to a previous version of OS X

  Best!

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn