Time Reset will blink

I'm 13 sequencing valves to collect ships composting CO2 concentration readings using a gas Analyzer.  Each valve will be selected at a time. After that each of them is selected, there must be a delay of about 10 seconds in order to eliminate the gases of the previous composting vessel that was picked and then there must be a delay of 10 seconds to sample each vessel composting and record in its data corressponding file.

I use a structure dealing with several tabs to complete each step of the sampling process.  I'll have the time reseting difficulties so that it starts with a zero and count 10 each time.  It works once, but then it is not reset to zero.  It will start at the first 10 seconds and count to eleven, then he will start at 9, then 8 and then so on.  I tried using the feedback of the spit 'Out of time' back to the "Reset" and "Auto Reset" PIN pin, but it will not be reset to 0.  How can I fix it? I posted the below VI

Well, I understood. I use the "time" to create a shift register that will contain the True value until the next cycle so that it resets the time spent at the beginning of the release cycle.

Tags: NI Software

Similar Questions

  • Our time capsule will blink a light amber and utilities said that it is overheating. What is the problem?

    We had a problem with our (less than 2 years) time capsule - the light yellow flashing, the fan runs often and looking in "utility" on my mac, it says that it is overheating. What is the cause of this?

    The Time Capsule fan runs constantly, so you shouldn't be aware of the fan running on the time Capsule 'often'.

    If you receive a message that the Time Capsule is overheating, there is probably a problem with the internal power supply on the Time Capsule.

    If you have an Apple Store near you, it would be wise to take the time Capsule to let the experts check the issue and discuss your options.

  • top of page sql time will blink, how true is that

    Hi guys,.

    I am viewing a report of the addm and feared a higher activity of sql.

    I have a sql having will blink best times.

    < i >
    2 372 2 275 128,690,535 4.28 0.00 fphtjnquzzpud [email protected] (TNS V1 - V3) SELECT USER_ID OF the SUBSCRIBER...
    < /i >



    T1) what is the meaning of the busy time?
    the time taken by the execution of a sql statement?

    Q2) is busy in the report illustrated above = sum of all the time spent by the execution of sql?

    If this the case, the most/often I run a SQL statement, more time will blink it will be and time so more db.

    But how can we say that it is an inefficient sql because he held most of the time just because it runs too frequently so other sqls?


    Please notify
    Kind regards
    Noob

    Hello

    It's

    in the addmrpt.sql which show 20393 here is time of time of the sql...

    SQL statements consuming significant database time were found.
    
       RECOMMENDATION 1: SQL Tuning, 24% benefit (20393 seconds)
          ACTION: Run SQL Tuning Advisor on the SQL statement with SQL_ID
             "9tkc7559d5drs".
             RELEVANT OBJECT: SQL statement with SQL_ID 9tkc7559d5drs and
             PLAN_HASH 1303522576
    

    But in awrrrpt.sql the time showing is for the total number of times where the sql is executed in the comic book.

    ^LSQL ordered by Elapsed Time       DB/Inst: STEELP/STEELP1  Snaps: 13011-13012
    -> Resources reported for PL/SQL code includes the resources used by all SQL
       statements called by the code.
    -> % Total DB Time is the Elapsed Time of the SQL statement divided
       into the Total Database Time multiplied by 100
    
      Elapsed      CPU                  Elap per  % Total
      Time (s)   Time (s)  Executions   Exec (s)  DB Time    SQL Id
    ---------- ---------- ------------ ---------- ------- -------------
         6,761      1,869            1     6761.3    11.2 4hsz1t5dsmhy4
    Module: XXLOTDET
    

    In order to check the addmrpt report.

    Thank you.
    Baskar.l

  • Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't. The following will install manually or with automatic updating.

    Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't.  The following will install manually or with automatic updating.

    Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)
    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
    Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
    Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
    A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)
    Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
    Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
    Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86

    Hello

    ·        Since when are you facing this problem?

    Windows Installer service is damaged. I suggest you follow the steps mentioned below.

    Method 1:

    I suggest you follow the steps mentioned below.

    Step 1:

     

    a. click on "Start" and then click on 'run '.

    b. type 'cmd' or 'command' in the box and click on 'OK '.

    c. type each of the following commands, and press 'Enter' after all the world:

    CD %windir%\system32

    Ren msi.dll msi.old

    Ren msiexec.exe msiexec.old

    Ren msihnd.dll msihnd.old

    output

    d. Type "exit" at the command prompt to close the command utility.

    e. restart your computer.

    Step 2:

    Download Windows Installer from the following link and install it on the system and see if the problem is resolved.

    Windows install 4.5 Redistributable

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

     

    Method 2:

    I suggest to reset the Windows Update components and then try to install updates on the system and check. Follow the steps mentioned below.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    For more reference, click on the link below.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Date and time resets each time the computer restarts, or stops.

    Date and time resets each time the computer restarts, or stops.

    Date and time resets each time the computer restarts, or stops.

    Re-define at what time?

    If you back up battery is faulty, and when you shut down the computer, the machine doesn't have enough 'juice' to operate. Thus, when you restart it, time will show either bad timing or outright from the date it was setup to the factory.

    TME to check or replace the battery.

    t-4-2

  • Is there a way to make the character will blink or squint with one eye?

    Hi all!

    Is there a way to make the character will blink or squint with one eye? For example, in the 'Customize-> head' - Section only, I can customize some points on both eyes at the same time, but I have not found a way to make the character 'close' one eye so that it looks as if it is kind of flashing. It is even possible to do it with fuse... or IM just in the wrong place?

    Thanks in advance!

    Fabian Hey!  Fuse face expressions are more than one aspect of this face when you ask 'preview' it have rather intended for the laying of the real face.  We generally recommend leaving the fuse facial expressions and make laying in Photoshop, once you get there!  Here is a screenshot showing where you can access controls of the face in Photoshop.  That being said - I didn't "think that we have a unilateral wink or blink in fuse or Photoshop at the moment.  Might be interesting to post an idea in the forum of ideas for "better facial posing?"

    1. Select the 3D layer in the layers panel
    2. Select the skeleton of the character in the 3D Panel
    3. In the properties of the Panel change to the tab 'face '.
    4. Select an expression of search results
    5. Adjust the expression using the sliders and the offsets

  • Firefox reset will erase my stored sessions?

    Hello
    Had the malware to yahoo and need to get rid of it by resetting my firefox.

    I use Firefox a LOT sessions, so am worried that I will delete all sessions recorded when I reset firefox?

    Firefox reset will erase my stored sessions?

    Thank you
    Richard

    Is the toolbar in the toolbar area? If you switch to full screen mode, this area will usually slide upward and out of sight. You can switch between normal view and full screen by pressing the F11 key.

    Usually, an additional toolbar in the toolbar area is added by an extension. Oddly enough, your "more details of the system" does not show an obvious extension of Yahoo!:

    Name: Firebug
    Name: MeasureIt
    Name: Session Manager
    Name: AVG Security Toolbar
    Name: HP Smart Web Printing
    

    ???

    If the toolbar is your home page (the page that is displayed when you create a new window using Ctrl + n), you can reset your default homepage using either:

    A little luck?

  • Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

    Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

    Yes. Time Capsule uses the Time Machine on your Mac software. Here is information on both and the restoration:

    http://www.Apple.com/airport-time-capsule/

    Use Time Machine to back up or restore your Mac - Apple Support

  • Return Time machine will not reinstall Yosemite.

    Model name: Mini Mac

    Model identifier: Macmini7, 1

    Processor name: Intel Core i5

    Processor speed: 2.6 GHz

    Number of processors: 1

    Total number of cores: 2

    (By heart) L2 Cache: 256 KB

    L3 Cache: 3 MB

    Memory: 8 GB

    1 TB HARD DRIVE

    I tried to reinstall my previous operating system which was Yosemite, on my Mac Mini, purchased in 2015.

    Return Time machine will not reinstall Yosemite.

    If I had an on. I would not upgrade!

    Hi danfromlittlerock,

    Thank you for using communities Support from Apple!

    I appreciate that you try to go back to OS X Yosemite using Time Machine. We know it can be frustrating when a process does not work the way you expect, but we are here to help.

    The following article explains how this process works. If this is the process that you have attempted to perform before, please let us know more your situation and what happens when you try the following steps.

    OS X El Capitan: revert to a previous version of OS X

    Best!

  • Adding a hard drive to Time Capsule will increase storage space

    I have one capsule 3 TB and and get time capsule backup fails due to lack of space.  I have connected a 2 TB hard drive to time Capsule.

    But what will happen now?  Time machine will share back up to two discs automatically.  Or do I have to put something else.

    You can't just add a player... TC has no brain at all... A normal NAS could JBOD configuration... in the TC, they are now and forever two separate discs...

    What you need to do is to move one or more backups on the drive you plugged in.

    The method for this depends on what you are trying to achieve... but you should be able to copy a sparsebundle existing since the internal drive of TC on the USB drive... the best way to do it is by ethernet wireless off and the USB (USB3, I hope) plugged into your Mac USB3 port.. The worst possible method using wireless for the USB connected to the TC.

    Once you copy the sparsebundle delete the original from the internal drive of TC to create space... then configure the TM in the computer that has the sparsebundle so that it points to the backup now on the USB... This may or may not work... but TM will say that it will start a new backup... what you hope, is that he picks up the existing sparsebundle and she continues to make TM backups.

  • Time capsule will not recognize the backup from another mac

    Time machine will not recognize the backup from another mac

    Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

    So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

  • Some programs and games will blink twice every few seconds

    Flickering programs.

    About 1/3 of all my programs and games will blink twice every 3-4 seconds. All programs that sparkle have a bar with file, edit, like Notepad. It does nothing else, but it's pretty boring. He only began to blink until recently, and I've not found a single solution on the internet. Someone knows how to fix this? I tried reinstalling my drivers, disabel aero and some fixes registry that has not worked.

    What make and model of PC?

    Try msconfig in the Startup tab, disable all, restart accepting the msg

    Missing issue?

    If so, msconfig, Startup tab, re-enable a bunch of startups, reboot, repeat the test.

    Its then a question for startups, trying again, until you can locate the origin of the problem

  • SX20 Time Reset

    Hello

    I encounter this problem on endpoints SX20. I used to adjust the setting of the time and place it at the exact time whenever I powered on the system. Is this a normal life when the codec is turned off, the time resets the default settings?

    Thank you.

    BR,

    Acevirgil

    Hello

    Also a possibility of bug, I was thinking an internal battery problem. In any case, do you have a NTP server in your network? A solution would use an NTP server, which is highly recommended for video conference indeed. Because if the weather is bad, you can have problems with the H323 Protocol, for example, if the client time is too different from the time of VCS, the registration can be rejected, I've seen issues like this before.

    If you are unable to use NTP, I suggest you open a TAC case, because it seems to be a hardware problem or bug.

    Concerning

    Paulo Souza

    My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  • If I have my latop factory reset will I have to reinstall windows 8.1?

    Original title: factory reset

    If I have my latop factory reset will I have to reinstall windows 8.1?

    Hello

    Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
    (new installation remove all).

    How to restore, refresh or reset your PC
    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    How to update Windows 8 and 8.1
    http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

    How to reset Windows 8 and 8.1
    http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

    Repair and recovery (create a recovery USB disk and more)
    http://Windows.Microsoft.com/en-us/Windows/repair-recovery-help#repair-recovery-help=Windows-8&V1H=win8tab1

    And if necessary, you can make a bootable disc.

    Download ISO 8.1 Windows using your Windows 8.0 key
    http://mcakins.com/2013/10/19/download-Windows-8-1-ISO-using-you-Windows-8-0-key/

    Download iso Windows 8.1
    http://philipyip.WordPress.com/download-Windows-8-1-ISO/

    Download ISO Windows 8.1 using a key of Windows 8 and a few simple tips
    http://BetaNews.com/2013/10/21/download-the-Windows-8-1-ISO-using-a-Windows-8-key-and-some-simple-trickery/

    You can also do a recovery USB drive.

    How to create a USB stick recovery in Windows 8 and 8.1
    http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

    On November 15, 2013 8.1 Windows Backup Media will be available for purchase. Newegg and
    others offer disk,

    "Backup Media" Windows 8.1 disk has the sale soon
    http://BetaNews.com/2013/11/05/Windows-8-1-back-up-media-disc-available-to-buy-soon/

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • On some sites, the hand cursor will blink and I have to click several times so he can click to go to the page I want. I think it may have to do with Adobe Flash, but I'm not sure. Any ideas?

    When I try to select pages on the top menu, my hand cursor continues to blink.

    The menu bar on this page is a Flash object.

    Do menu work to highlight the menu item selected hover?

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

Maybe you are looking for

  • Satellite T130-30 - is slow inrecdible

    I just got a new Toshiba Satellite T130-30 because that my last laptop was able to get better after a heavy virusattack. Brand new from the store I had problems at first. Windows wouldn't install and kept restarting. Fortunately, this one went. Now,

  • Satellite L775-11F with a pale screen, a bad connector plugged the PSU, the worn trackpad

    Hi guys & gals, I got this L775 11(f) since Christmas, and I noticed on the occasion that the screen seems to lose some clarification and go a little pale. It's nothing to do with the screen when the backlight reduced to save energy, I can be typing

  • Satellite 2410-303 does not illuminate

    Hello We have a system here on the bench with the following problem: -system does not light-with the inserted battery power LED keeps blinking yellow-connected to the network of continuous flashing yellow LED power-no fan or turns HARD drive noise-ot

  • What connection to use for faster printing

    I install my new of Officejet Pro 8600 today.  I have three options to connect, is a USB cable, ethernet cable or wireless.  To make the decision, I have a second remote desktop connected wireless to the internet and the usual iPhones.  My work horse

  • Import from Lightroom for comp

    I thought that COMP is used to allow me to pull images from Lightroom Mobile in a design.  But now I can't find it on any of the menus.  Where is it supposed to be and is there a problem for example Comp cannot detect the presence of Lightroom on my