His lost after the wireless mouse install

Similar Questions

• The Synaptics Touchpad in Acer Aspire One does not not after the installation of the wireless mouse.

  After you install a HD on my Acer Aspire One wireless mouse, the Synaptics Touchpad works not at all even if feataure troubleshooting indicates it works correctly.  Default is always to the wireless mouse. I tried to deavtivating the wireless mouse and reset to factory manufacturer.  This does not re-enable the Touchpad.

  Try Fn + F7. This option turns the touchpad on and outside.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• How to do a right click on the wireless mouse?

  Right-click on the wireless mouse?

  Open System Preferences > mouse and select the tab k Point & clickthen the tab more gestures to configure your mouse.

• How do I change the batteries in the wireless mouse

  I can't find Vault battery to change the batteries in the wireless mouse, please show me where.

  Hi mydavid0615,

  Without knowing the manufacturer, the brand and model of the mouse, it is difficult to say.  They are all different.

  But that being said, I've seen most have a button or a push bottom bar who, when you move it going to go get the cover of the box that contains the batteries (I found is normally on the top at the back of the mouse, but you can not and should not attempt to open until you release as indicated).

  If this does not help, then please provide us with the information above on the mouse and we will try to help you the information on its website.

  Good luck!

• How to replace the battery for the wireless mouse? I received a message from Microsoft IntelliPoint

  I get a message on my screen of Microsoft IntelliPoint that reads: the wireless mouse battery level is extremely low.  Replace the batteries now to keep the operation of the wireless mouse.  How to replace or place where the batteries?

  This will give you some clues

  http://www.ehow.com/how_6763222_replace-battery-Microsoft-mouse.html

• Connection of the wireless mouse problem

  Hope this is the right forum section.

  in any case, I have a Microsoft Wireless Laser Mouse 8000 with a v3.0 transmitter/receiver for Bluetooth (usb of course).  Since I have a new laptop a few months ago, I had some problems with the use of this mouse.  It does sometimes not work when I turn on the computer, and sometimes at random, it freezes or disconnects, be it it works all of a sudden without reason.  All I have to do to remedy is cut to the mouse, unplug the receiver, then turn it on and plug it in again.  Sounds easy, but it's extremely irritating.  When I got to the laptop, I tried to install the mouse driver.  I always had a message saying "failed to install software" or something like that.  Once accidentally, I managed to get the combine usb configured as a general bluetooth receiver, who did my computer recognize it rather than the built-in bluetooth.  The mouse "works" with or without the installed driver software and with or without bed in the lit bluetooth receiver. With the random disconnects always, of course.  This mouse works perfectly with my old laptop and windows xp.

  News of the computer: Dell Studio, with Windows Vista home premium.  Built in bluetooth adapter (which apparently is a bad thing?).

  Anyway, how I have difficulty or prevent this happening?  Is there a way to get the driver to install properly and who's going to fix it? Better yet, is it possible to make my work bluilt bluetooth for this mouse receiver, so I don't have to use the usb receiver?

  Any help much appreciated.
  Thank you.

  Hi Android5,

  Thanks for posting on the Microsoft answers Forums.

  The following link is the site that shows you what all the hardware and software is compatible with Windows Vista: http://www.microsoft.com/windows/compatibility/

  Please do not hesitate to visit this site to see if your mouse is compatible with Windows Vista or not.

  Be you please perform a clean boot on your system to see if that helps to solve the problem? Please see the following link for steps on performing a clean boot on your computer: http://support.microsoft.com/kb/929135

  After you run the clean boot, please try to uninstall the mouse completely and then reinstall all the drivers to see if you still get the same error message or not.

  Thanks for posting to let us know if this information was useful or if you still need help to find a solution to your problem.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The wireless mouse pointer behaves badly in desktop Acer

  Have an acer desktop, internet explore xp, probably need update of Windows 8

  Original title: have a counter top and just brought a mouse and a wireless keyboard, arrow appear everywhere and have to wait for it to settle down before continuing where I want to go, please advice thanks

  Hi Sabnazzy,

  Welcome to the community of Microsoft and thanks for posting the question. According to your description, wireless mouse does not work properly. I've surely you will help find a solution on the issue.

  1. What is the model number for Acer desktop computer?

  2. What is the brand and model of the keyboard and wireless mouse?

  3. not this problem occurs when you run a specific program or out of order?

  Method 1: Try to insert another port of the mouse and check.

  Try to connect the receiver to a different port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  Method 2:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, and then run.

  b. type msconfigand click OK. The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal startup - load all services and device drivers and then click on OK.

  d. When you are prompted, click restart to restart the computer.

  If you need assistance in upgrading Windows 8, I suggest you to return the items. You can check hardware compatibility by using the upgrade wizard tool.

  Upgrade to Windows 8
  http://Windows.Microsoft.com/en-in/Windows-8/upgrade-to-Windows-8

  Great upgrade, great offers

  http://Windows.Microsoft.com/en-us/Windows/buy

  Hope this information helps. Please reply back with the State so that we can help you.

• [Solved] After the update is installed, I can not do anything with Vista.

  Hi, first time posting here. I recently installed an update, I don't know the name of it, but its screwed my PC everything its a HP laptop with Windows Home Premium64 bits cpu. First of all, when it restarted, and I logged, the taskbar has been pale white. I tried to get back to it, but it is the default. So no luck there. Sortly after that, the computer crashed while conducting. It was a memory dump while conducting. Then restarted. And nothing has changed. Still crashed. Unfortunately, I do not have a restore disc. And I can't restore it, which I've tried to do. And the computer crashed the second time by. Now, I am forced to use the "RECOVERY" Partition that comes with the computer. His support still up to this time. So I decided to see if someone can help me here. Any help would be great!

  Summary
  * Cannot restore
  * Do not have a restore disc
  * Blue Screen appears after 3 to 5 minutes of logging
  * Taskbar is white, pale style XP.
  * Forced backup and restore with HP "recovery Partition".
  Thanks in advanced for any help.

  Hello

  Did you use the F11 key to launch the recovery?

  Which starts the HP back to factory settings recovery.

  Which reinstalls Vista, back to the way you bought it.

  It is the process of HP:

  Recover Windows Vista operating system using HP Recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Here are the options that you are currently using (you cannot use each of them as it does not start)

  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  If you reinstall, there is little we can do for you.

  See you soon.

• Track issues with the Wireless Mouse 5000 bought with Wireless Comfort Desktop 5000...

  Just bought a Microsoft Keyboard and Mouse (Wireless Comfort Desktop 5000). For some reason any mouse is pointing upwards and is not followed correctly. What seems to be the case after a few minutes of use tracking becomes unstable and it feels like the mouse pointer is delayed and begins to jump around the screen. It is even more evident when I start trying to drag windows around the office and if I drag too fast it starts to "hiccup" (best I can describe it) and it seems to miss a few frames per second that I am dragging to the desktop. I noticed in games, especially the FPS, quick turns because of the mouse to lose track, and a second, I'm facing forward and the other second I'm back, with no apparent transition between the two. I tried to disable the accuracy monitoring, but to no avail... For any help or suggestion would be appreciated...

  I use Windows 7 Professional and have no such problems with 8 year old Logitech wireless mouse, this keyboard is replacement.

  I know this is an old thread, but I can see nowear where the problem has been resolved.  I have a Logitech wireless mouse on my laptop and a thread on my desk, both had the same problem. The problem has been solved for me using just a mouse pad, no problem since! This answer may be there somewhere but I didn't fall on it even from Microsoft (surprise). Incidentally, my mousepad is often a sheet of A4 paper on a clip board. If someone actually reads this please let me know if it was any help.

• Cannot discover 8500 scanner after the thin printer install functions

  After installing my a909g 8500 on my pc via ethernet in the network, the printer is detected and works fine but the scanner is not. The device is connected to the network that the two cables and wirles as it was the only way to get the printer to be installed on the pc. Some details are:

  OS-Windows 7

  Cisco/linksys E1000 router

  PC-emachines EL1850

  OK - I finally got everything to work. I have the pc connected directly to the printer through the ethernet connection and was able to install all my network folders. Then I unplugged the ethernet printer and plugged into the wireless router. The printer now connect wirelessly to the network and everything is performimg as expected. Was the only thing I did not understand why the downloaded software (version 14.0) would not install all features through the wireless connection, but would install the printer only. Just something to think about.

• Using the wireless mouse at startup

  Hello

  I use iCloud account so El Capitan requires me to connect to the startup.

  I bought a new mouse (associated without a dongle) wireless that I would use to select the user to the login screen, but it does not work.  Can I use another mouse with a dongle, or I can use the magic mouse (which is a point of total sale).

  I use a Logitech MX Anywhere 2.  Once I log in, it works perfectly.  Any ideas?

  MacBook Pro 13 early 2015

  I found this on their Web site. Not sure if this can help. http://support.logitech.com/en_ca/article/Connect-the-MX-Anywhere-2-mouse-to-a-B luetooth-device? product = a0qi0000008tB99AAE #mac_osx

  Kim

• Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card

  I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed.  I did it on other HP computers I've owned without problem.

  Thank you for any help you can give me.

  LarryC4

  Hello:

  See if your BIOS has an embedded audio location.

  If so, it can automatically able to off when you installed the add-in on the sound card.

  Check the options you have for setting the audio embedded.

  If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.

  The sound should then work on both devices.

  And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.

• WiFi constantly drops after the last update install

  Hey everyone, long time, apple, displays the first time user

  So my wife and I have almost identical Macbook Air 13 ", but his is early 2015, mine is beginning 2014. We have both set to update to the latest version of OS X El Capitan 10.11.2 and since then (two days ago) my wifi falls continuously every 10-15 minutes, forcing me to turn on the wifi and turn it back on. Woman MacBook doesn't have this problem, it is not a router problem. However, I have reset the router, stop my computer and all the latest updates installed. I have run diagnostics and he had to monitor my wifi and it fell every 10-15 minutes like clockwork.

  Is there a file I can download that can restore my wifi?

  Hello, TerryNikop.

  Please visit Apple support communities.

  I see that you have a problem with the disconnection of the Wi - Fi on your MacBook Air.  I'll start with the treatment of updates of the firmware on your router and adjust the settings by section below.  You can also make sure that you are not connected to a network of comments and test the change between 2.4 and 5 GHz options that offer most of the routers if they are available.

  Recommended settings for the WiFi routers and access points

  You can also try to create a new Wi - Fi location, and then test to see if the network goes.

  Using network locations (Mac OS X 10.6 and later)

  Then, try to create a new user on your Mac and test to see if the behavior persists.  Please let me know the results of these tests in your follow-up.

  How to test a question in another account on your Mac.

  See you soon

• What causes use of the wireless mouse a lot of included

  I have to change my battreis in my wireless mouse a lot and I wondered why

  Hi carolyn

  The mouse you use it is obvious that the battery drains there don't you try rechargeable batteries and save money for yourself