Timed ON / OFF

Similar Questions

• Timed power off

  I have a Presario CQ60 notebook (laptop).  I like listening to Internet radio, when I go to bed at night.  But I do not have my computer running all night after I fall asleep.  Is it possible for me to put a timer that automatically turn off the unit after a certain period of time?  Please notify.

  Check out this free timer to see if it meets your needs:

  http://Sinvise.NET/home/projects/software/shutdown-timer

  Or you can use Windows 'Task Scheduler' to set up a stop for the same time every night:

  http://www.thespinningdonut.com/how-to-automatically-shutdown-your-Windows-Vista-computer/

• stop used my Mac Pro?

  Whenever I have it hit "SHUTDOWN" my computer stops but RESTARTS immediately. I have not any open programs, and I have no timed auto-off or start enabled.

  Start Safe Mode removes the system caches that may help with the problem of restarting.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  On Safe Mode

  If a Safe Mode boot does not help, try here > OS X: when your computer restarts spontaneously

• Error 0xBFF62133 with NI-CAN on NOR-XNET

  My C application was written with the NI-CAN Channel API and works very well on the old cards PCI - CAN. Now he runs on a PCI-8512 OR XNET 1.3.0 with the NI-CAN 2.7.2 compatibility library and falsely, it gives this error: "NI-CAN: (Hex 0xBFF62133) you set an attribute that is not supported when Virtual Bus Timing is off." Refer to the section of frame channel Conversion of the NI-CAN manual for a list of the attributes that return an error when Virtual Bus Timing is false. Solutions: 1) Set Virtual Bus Timing true (or leave as default). "(2)"do not set the attribute not supported."

  My application does not frame channel Conversion or the virtual Bus to use directly, it turns to speak directly on the bus hardware CAN0 via the channel API. Use the compatibility library the virtual Bus?

  How can I avoid this error?

  Thank you.

  So the actual error you see is 0xBFF63133, not 0xBFF62133 (starting with 0xBFF63 - error codes are errors OR XNET). This is due to a bug in the way the database is imported (several threads all try to create a cluster with the same name, where the error "name of the cluster in double").

  While the bug will be fixed in the future, in the meantime, you need to make calls to sequential nctInitStart. I recommend a small function that catches a global mutex and then calls nctInitStart. Sorry for the inconvenience.

• issue of producer/consumer

  Hi all

  I use the loop of producer to manage user interface events. One of the events of the thesis must begin to disseminate data to consumers loops. In one of the loops of consumer I want to apply an algorithim every 5 seconds for data, so if I was streaming data at 50 Hz I would apply the algorithim every 250 samples of data.

  I'm thinking about a suitable room logic to do so. I was thinking of using meter iteration of the loop of consumption that I would know how long takes of each iteration of the loop and therefore could apply the algorithim where the number of iterations reaches a certain value.

  I wonder no matter who any other, perhaps more intuitive to go about this?

  Stroke

  Stroke,

  The iteration count is probably a poor choice.  When you get a faster computer next year the loop rotates faster and your timing is off.  Or you add a few extra features to the program and the loop runs more slowly.

  The precision with which you need to measure the 5 seconds? Unless you have millisecond resolution or precision, you can just us the number of cycles or the functions of the time of day.  When you start your process, place right now in a shift register.  Whenever you make the acquisition of the data, compare the time of the start time.  When the difference is > 5 seconds, apply the algorithm and reset the start time.

  Another way is to just count your sample data.  When you have accumulated 250 samples, treat them.  If you still want to process batches of samples exactly 250, it is the best way.  If you have 270 samples, take the 250 most elders for the treatment and keep the most recent 20 as the first part of the next batch.

  Lynn

• His monitor refresh rate

  Hello, I am a high school student and I am doing a project where I need to analyze the sounds from a microphone. I could listen to the microphone and the waveform was updated over time as the sound from the microphone released. My problem is that the parser was not time OER, but would rather take a sample and display it as a graph, wait 2 seconds, take 1/2 second taste, view a chart. It gave me 2 problems, first is that I couldn't miss round if it passes through the timing was off and I need to analyze the amplitude of the sound, so that wouldnot work either because I had such a limited sample. I created a flag for the amplitude in the signal processor and it would also only updated every 2 seconds. I tried to change the settings of the chart so that it was a synchronous display, but that doesn't work anymore.

  If you want, I can post the VI.

  Any ideas as to why this slow cooling that happens?

  Why this delay?

  Do the math:

  You get the samples at a rate of 12000-24000. If you wish to receive 12000 samples per second, how many seconds it will take to get 24000?

  Your code looks basically pretty good. A few recommendations: first, look in the design model ' producer/consumer '. Part of the problem is that you try to perform a treatment too in the loop of the acquisition. You need to get out the operations of data analysis in a parallel loop. Second, if you can understand how to do the analysis without them, lose the express screws. Express VIs lift you a young running, but they can be very inefficient. Third, what is the frequency range you are interested in? A sampling rate of 12 kHz will be accuratly represent data up to 6 kHz. If it's beyond the bandwidth of the microphone you use you can record acquisition and processing time by slowing down the sampling frequency. Get online and Google "Nyquist frequency".

  Mike...

  PS: What year of high school are you? What project are you working on? How is it that you use LV to the project?

• NIDaqmxbase reading VI until the challenge buffer empty

  OK, I have a loop that I want to run 1/second.  I'm this calendar with a data acquisition and 1 second of data for controlling the playback loop.  So far so good.

  But every once in a while, other software, hardware, user, hardware problems intervention occurs and the loop misses a beat or late.   Then, I want to read the whole of the buffer.  For the moment, I have a loop that bed 1 second of data (for example 32 channels at 2500 Hz) with a delay of a little more than 1 second.  Then I go back and read the data increasingly chuncks with a timeout of 0 seconds.  This call returns all the data in the buffer since it loops until the timeout of zero is reached.

  So, what's the problem?  Well this second loop always takes over time so I always get about 2 additional samples.  So my timing is off by about 1 msec each loop.  It's not a big deal, but annoying as this software is designed to work for months at a time.

  So, how do I read exactly 1 second of data unless there is a large number (IE at least 2 seconds of data) in the buffer?

  It's on Mac OS X, so no call loops

  LabVIEW 8.5.1

  VISA 4.5.0

  NIDAQmxBase 3.2.0

  Here is the reading until the empty Code.

  
  

• TX reset not hard

  I tried to reset hard my TX without success.  Can someone help me?

  Make sure you follow the directions exactly as shown.  If your timing is off, it will not perform properly.

  To perform a hard reset: (Palm Knowledgebase article #887)

  By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

  You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

  WyreNut

  Message relates to: Centro (AT & T)

• How can I improve the sound quality when the Sync property is set to 'stream '.

  I recently had a problem with the text in synchronization with sound (Narrator). For example, when a user has typed a button a Narrator reads the text on the page and want words to point out that the Narrator read the words. The problem that I ran was that she place well on the desktop, but the timing was off on some mobile devices. So I put the 'Stream' sync and it worked fine. But I ran into another problem; the sound quality is down, sounding muffled.

  How can I make the sound better when the Sync property is set to 'Stream '?

  You can control streaming sound quality in your publish settings that can replace the sound quality settings that you can set by clicking on properties of the sound of the library (click right/properties).

• Can I turn off automatic resizing during expansion of a timed loop?

  Automatic resizing of the block diagram has been irritating me for a while now.  As soon as I expanded a loop timed, the rest of my block diagram develops strange and not at all useful.  To avoid this, I can move my loop timed far into the empty space around my code, resize, then go back - but it's really irritating.  If there is a way to turn this useless and annoying automatic sizing off I didn't succeed.

  In LabVIEW 8.2.1 + you can go to Tools--> Options--> block diagram and then shut down Place of Structures with Auto activated Grow.

  If you are looking at a diagram, you can right-click on the structure itself and disable Auto Grow.

  Automatic deactivation grow in the options is one of the first things I do when installing LabVIEW (there are a few other settings I change too).

  Rob

• Why the timing information not disappear when I switch off sync in my office?

  I'm at the office, in my work and I disconnect from my account synchronization to work and I want to connect to my personal account, but I can't because the timing with the first account information have not gone and wil be merged with personal information.

  Sync is not intended to be used in this way. Data that is synchronized is not a temporary view, the data is copied in Firefox on the device: the data do not disappear when you disconnect fron one account synchronization or close Firefox.

  You have to work and personal accounts of Sync thru having two distinct profiles.
  https://support.Mozilla.org/en-us/KB/profiles-where-Firefox-stores-user-data
  https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles

  If you are interested in two distinct profiles, let know us and we can guide you when you set up desktop shortcuts for each profile opening.

• VCB error: failed to create a snapshot suspended because the snapshot creation operation has timed out for holding off the coast of I/O in the frozen VM

  Hi all, I have a problem, creating a model by cloning the Live VM for Windows Server 2003 x 64 Standard edition and in fact it happens on my own install Windows Server 2008 R2 Enterprise x 64 as well?

  Here is the error message:

  Creating snapshot of the Virtual Machine

  * _Cannot

  create a suspended because the create snapshot snapshot operation

  timed for the outfit out of e/s in virtual jelly

  machine._*

  I installed the VMWare tools and make sure that the VSS service are all on but he failed.

  any help in this matter would be greatly appreciated.

  Thank you.

  Kind regards

  AWT

  Check out my Guide to proven practices VCB on the VI:OPS website-> http://viops.vmware.com/home/docs/DOC-1392

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• Simultaneous use of flex pitch and the "timing" on the same region?

  Is it possible to edit a region in 10 with the two flex pitch logic and timing? When I toggle between modes, I get a message that informs me that pitch adjustments will be suspended. If I put the pitch of the notes to something way off - to check it out - it seems that as soon as I switch to flex pitch in calendar mode, pitch adjustments are ignored. Is it possible to have both at the same time? Workaround is bounce calendar settings in place then the correct pitch. Is this the best way? The only way? Any information would be appreciated. Thank you. -John

  IF you use flexible hours first then flex pitch your flexible hourly landmarks remain intact. In pitch flex mode you can select to the end of a note and drag to the right or left and upwards or downwards. So you can bend the pitch and flexible at the same time, but only when there is an event of note.

• Timed Access - won't save the changes of time

  I am using access delayed for several years.  It worked great until today.  When I try to change the time settings, it seems to work.  For example, I got our xbox set to turn off at 11:30.  I changed it at 23:31.  I hit 'Fact' several times until you are prompted to update.  It seemed to work - I even went back to check.  But then less than a minute later she came back both previous.  I use an AirPort Extreme and just updated to 7.7.7.  I also expanded the network by using an Airport Express, which has the same parameters of time on it.  I tried to time changes using AirPort Utility on my iPhone and on my Windows PC.

  Two options that have both worked for me:

  1) return to 7.7.3 firmware

  (2) keep installed 7.7.7 and delete all the access settings timed, updated to save installation and let AirPort Extreme will restart. Then enter the settings again.

  Can't tell if it will work for you, however.  Good luck if you want to try it. Keep the Express turned off until you have AirPort Extreme up and running properly. Then, turn on the Express.

• Enable/disable or change the "timing" on the backlit keyboard

  I love the backlit keyboard, which was a key factor for buying the P750.

  But is it possible to change the State of the backlit keyboard?

  I found that the economic mode turns off the light, but is it possible to turn it on continuously - or change the "timing"? In my opinion, that he died too soon.

  Please open Toshiba Assist > Optimize > HWSetup and you will find all the options related to the keyboard backlight.