Copy (duplicate VM) of the remote computer to the local computer

Similar Questions

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Converter Agent cannot be installed on the remote computer

  I receive the error (see attach file) then the converter tries to install the converter Agent on the remote computer.

  Any suggestion.

  Help, please.

  You can manually copy the agent and try to run it in a user session is the same credentials that the account used in step 1?

  The Agent MSI located in the folder of installation of Converter Standalone.

  You get only an error of the converter, but if more details can be found in this way.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• the software on the remote computer seems to be incompatible with this version of screen sharing

  Hello

  I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message

  "Connection failed for 'iMac_5K'.

  The software on the remote computer seems to be incompatible with this version of screen sharing.

  MacBook pro screen resolution is 1920 x 1200

  the iMac 5K resolution is 3200 x 1800

  Thank you!

  Hemdani

  What is your question? The message seems pretty clear...

• Generated sending the signals to a remote computer in a network

  Hi guys, I am new to Labview and need help. I use Labview to generate a voice modulated signal and I want to send this signal to a remote computer (real-time). How can I do this, so that this voice signal is regenerated in the remote computer?

  Hi Sarah, thanks for the advice.

• Open the file does not close on a remote computer through the computer management console

  I try to use the MMC snap-in computer management to connect to a remote computer that contains our shared documents to close an open file on the remote user's computer.  When I right click and select open close file, it seems closed in the MMC console, but the document is still open on the user's computer.

  Why does not close the file?

  Hello

  Please post your question here for assistance with the MMC snap-in:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• I have a c4700 printer. It analyses, but it will not copy or print from the computer

  I have a C4700 printer.  Have no trouble scanning.  It will be not copy or print from the computer.  Please help me if you can.

  I have a C4700 printer.  Have no trouble scanning.  It will be not copy or print from the computer.  Please help me if you can.

  Hello

  You will have to contact HP support for this problem.

  Make sure you have the latest drivers and software installed.

  Printers and multifunction:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=18972&h_page=hpcom&cc=us&lang=en&h_client=S-A-R163-1

  You can also ask this question on the HP Support forums.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/PSG/?category.ID=inkjet

  Or, contact HP support.

  Call Support and Service the customer of HP Officejet Pro 8500 has e-All-in-One Printer - A910a:
  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&lang=en&LC=en&product=4083969&x=5&y=14

  Concerning

• Server 2K 8 Remote Desktop no despite its "don't bring to the local computer" active, impossible to find sounds and Audio devices?

  I'm running Vista 64 to connect to a remote computer that has Windows Server 2008. When the remote desktop connection via, under the options for sound local computer that I "Make to this computer" activated. However I still get all the sounds, and the volume in the lower right corner icon has a red x on it. Under the heading reading devices, it says "no audio device is installed". In Device Manager, I don't see anything for sound and audio devices.

  I found an article that mentioned the sounds and Audio devices in Control Panel, however I have only 'His' option - which opens the same as right click on the volume with mute icon and choosing of reading devices. I don't see anything on the RDP Audio Driver settings.

  Here's a screenshot of my desktop remotely, with the Control Panel, Device Manager, and open windows of his:

  http://img27.imageshack.us/img27/959/screenshotxqp.jpg

  How to activate the sound remote desktop?

  Hi Tsaton,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is linked to the issue in Windows Server 2008 machine. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• This computer can't connect to the remote computer

  I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

  • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
  • I checked the services and that they perform a remote procedure call (RPC)
  • Restarted the server several times.

  I can remote into other servers of this machine if I log in locally.

  Please advise,

  Michael McDaniel

  301-763-1160 off.

  Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

• Run a LV-application on the remote computer

  Hi all

  I am trying to install an App LabVIEW functioning as a server in our local network. I might add this as a service in the respective machine autostart. However, I prefer to have a method to start the respective application of a different LV (vi or exe) go elsewhere in the local area network. This means that potential customers can start the server if it is not yet done.

  Does anyone have an idea? Searched for examples and the internet for no results.

  TIA!

  Greetings from the Germany!

  --

  Him

  This question comes up a lot.  And I always recommend PsTools from SysInternals:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649.aspx

  They are a free set of command line utilities.  One of the utilities is PsExec which can be used to launch the exe on remote computers.

  NOTE: Remember that setting up your remote application as an "NT Service" is a little more complex.  If you manage to actually implement a 'service', you would actually use a different tool (PsService) to start a service on a remote computer.  Either one will do the job.

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• How can I activate the remote computer to power saving Mode monitor?

  I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
  Desktop computers:

  • are the Dell Optiplex GX260
  • Run Windows XP SP3
  • have Dell 17 "monitors
  • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

  I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

  There are several ways to handle this.

  #1-have affected the power turn on their monitors, but let run PC
  #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
  #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

  I hope this helps.

• The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp

  Hello

  I have Windows server 2003 I have the server license terminal server, but one of my XP machine, which I'm calling his error remote desktop by giving as below
  The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp.

  Thank you
  Deepak Labonté.

  Hello annelabonnote

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads